Aprilia Pegaso 650 Werk (2009)

Geschrieben auf von

The Aprilia Pegaso 650 Factory is a 2009 motorcycle with a four-stroke, single-cylinder, SOHC engine that has a capacity of 659cc. It has a compression ratio of 10.0:1 and is liquid-cooled, meeting Euro 3 emission standards. The motorcycle uses electronic fuel injection with a 44mm throttle body, and has a digital ignition system. The engine is capable of producing a maximum power of 36.4 kW / 48 hp at 6250 rpm, and a maximum torque of 61.3 Nm / 6.25 kgf-m / 45.2 lb-ft at 5200 rpm. The clutch is multi-plate and in oil bath, while the transmission is a five-speed with a final drive chain.

The motorcycle’s frame is made of steel, with an open cradle and single spar design. It has a front suspension with a 45mm Marzocchi telescopic fork, with a front wheel travel of 140mm / 5.1in. The rear suspension features a high-strength steel swingarm with an Aprilia Progressive System (APS) rising rate linkage and Sachs hydraulic monoshock that is adjustable for rebound and preload, with a rear wheel travel of 130mm / 6.7in.

The Aprilia Pegaso 650 Factory is equipped with single A320mm disc front brakes with a two-piston caliper and a single A240mm disc rear brake with a one-piston caliper.

Technische Daten:

Make Model: Aprilia Pegaso 650 Factory

Jahr: 2009


Motor: Viertakt, Einzylinder, SOHC, 4 Ventile
Hubraum: 659 cm³ / 40,2 Zoll
Bohrung x Hub: 100 x 84 mm
Verdichtungsverhältnis: 10,0:1
Kühlsystem: Flüssigkeitsgekühlt
Abgasnorm: Euro 3
Ansaugung: Elektronische Kraftstoffeinspritzung. ~A44mm Drosselklappe
Zündung: Digital
Anfahren: Elektrisch
Maximale Leistung: 36,4 kW / 48 PS bei 6250 U/min
Maximales Drehmoment: 61,3 Nm / 6,25 kgf-m / 45,2 lb-ft @ 5200 U/min
Kupplung: Lamellenkupplung im Ölbad
Getriebe: 5-Gang
Endantrieb: Kette
Rahmen: Stahl, offenes Gestell, einholmiger Rahmen

Vorderradaufhängung: ~A45 mm Marzocchi Teleskopgabel
Front Wheel Travel: 140 mm / 5.1 in
Hintere Aufhängung: Hochfeste Stahlschwinge. Aprilia Progressive System (APS) mit ansteigender Anlenkung. Hydraulisches Sachs Monofederbein mit einstellbarer Zugstufe und Vorspannung.
Rear Wheel Travel: 130 mm / 6.7 in
Vordere Bremsen: Einzelne ~A320 mm Scheibe, 2 Kolben Bremssattel
Hintere Bremsen: Einzelne ~A240 mm Scheibe, 1 Kolbenzange

Verwandte Modelle: