Aprilia Pegaso 650 (1997-98)

The Aprilia Pegaso 650 is a motorcycle produced in 1997-98. It is powered by a four-stroke, single-cylinder, DOHC engine with a capacity of 652cc. The bore x stroke measure 100 x 83 mm, while the compression ratio is 9.1:1. The liquid-cooled motorcycle has an induction of 2 x ~A32mm Mikuni BST33 and an electric starting system. The max power output is 36.4 kW / 50 hp @ 7000 rpm, while the max torque is 59 Nm / 6.02 kgf-m / 43.5 lb-ft @ 6500 rpm. The transmission is a five-speed system, and the final drive is through a chain. Its front suspension is ~A45 mm upside-down forks, and its rear suspension is a varying section high-strength steel swing-arm with Aprilia Progressive System (APS) rising rate linkage. The motorcycle has a single ~A300 mm disc and a 2-piston caliper for its front brakes, while it has a single ~A220 mm disc and a 1-piston caliper at the rear. The front and rear tires have sizes of 100/90-19 and 130/80-17, respectively. The motorcycle weighs 160 kg/352 lbs (dry) and 175kg/385 lbs (wet), with a fuel capacity of 21L / 5.5 US gal.

Technische Daten:

Make Model: Aprilia Pegaso 650

Jahr: 1997 - 98

Engine: Four stroke, single-cylinder, DOHC, 5 valves
Capacity: 652 cc / 39.8 cu in
Bohrung x Hub: 100 x 83 mm
Verdichtungsverhältnis: 9,1:1
Kühlsystem: Flüssigkeitsgekühlt
Induction: 2 x ~A32 mm Mikuni BST33
Anfahren: Elektrisch
Max Power: 36.4 kW / 50 hp @ 7000 rpm
Max Torque: 59 Nm / 6.02 kgf-m / 43.5 lb-ft @ 6500 rpm
Getriebe: 5-Gang
Endantrieb: Kette
Front Suspension: ~A45 mm Upside down forks preload adjustable, Marzocci
Federweg Vorderrad: 175 mm / 6.9 in
Rear Suspension: Varying section high strength steel swing-arm, Aprilia Progressive System (APS) rising rate linkage
Front Brakes: Single ~A300 mm disc, 2 piston caliper

Hintere Bremsen: Einzelne ~A220 mm Scheibe, 1 Kolbenzange
Reifen vorne: 100/90-19
Hinterreifen: 130/80-17
Trockengewicht: 160 kg / 352 lbs
Wet Weight: 175 kg / 385 lbs
Fuel Capacity: 21 L / 5.5 US gal

Verwandte Modelle: