Moto Morini Archives - MotorcycleSpecifications.com https://motorcyclespecifications.com/category/moto-morini/ Find your motorcycle specifications Sun, 16 Apr 2023 22:53:22 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Moto Morini Granpasso 1200 (2011) https://motorcyclespecifications.com/moto-morini-granpasso-1200-2011-specs/ Tue, 04 Apr 2023 06:46:56 +0000 https://motorcyclespecifications.com/?p=44008 The Moto Morini Granpasso H83 is a 2011 motorcycle with a liquid-cooled, 1187 cc engine that produces 117 horsepower and 102 Nm of torque. It has a six-speed transmission and

The post Moto Morini Granpasso 1200 (2011) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini Granpasso H83 is a 2011 motorcycle with a liquid-cooled, 1187 cc engine that produces 117 horsepower and 102 Nm of torque. It has a six-speed transmission and a chain final drive. The bike sits on a high-strength steel tubular trellis frame and has a Marzocchi upside-down front suspension with 50mm stems and Ahlins single-shock rear suspension with a separate tank. The brakes consist of 2x 298mm front discs and a single 255mm rear disc. For tires, it features a 110/80 ZR 19 front and a 180/55 ZR 17 rear. The bike weighs 210.0 kg and has a fuel capacity of 27 liters with an average consumption of 18.1 km/lit. The bike’s standing 1/4 mile time is approximately 12.1 seconds, and the top speed is 218.9 km/h.

Technical specifications:

Make Model: Moto Morini Granpasso H83

Year: 2011 –
Engine: Four stroke, 87 degrees V longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.5 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5:1
Lubrication: Forced with trochoidal pump
Induction: Magneti Marelli fuel injection 54 mm throttle body
Ignition: I.A.W. electronic
Starting: Electric
Max Power: 86 kW / 117 hp @ 8500 rpm
Max Torque: 102 Nm / 10.4 kgf-m @ 6750 rpm
Clutch: Multiplate clutch in oil bath with antis kipping and radial master cylinder.
Transmission: 6 Speed
Final Drive: Chain
Frame: Verlicchi high strength steel tubular trellis frame
Front Suspension: Marzocchi upside down with 50mm stems, 190mm wheel travel.
Rear Suspension: ~Ahlins single shock, with separate tank, preload , rebound and compression adjustable, 200mm wheel travel
Front Brakes: 2x 298mm discs 2 piston callipers
Rear Brakes: Single 255mm disc 2 piston caliper
Front Tyre: 110/80 ZR 19
Rear Tyre: 180/55 ZR 17
Dimensions: Length 2,170 mm / 85.4 in
Seat Height: 830 mm / 32.7 in
Ground Clearance: 200 mm / 7.9 in
Dry Weight: 210.0 kg / 463 lbs
Fuel Capacity: 27 Litres / 7.1 US gal
Consumption average: 18.1 km/lit
Standing 1/4 Mile: 12.1 sec
Top Speed: 218.9 km/h
Consumption Average: 18.1 km/lit
Standing 1/4 Mile: 12.1 sec
Top Speed: 218.9 km/h

The post Moto Morini Granpasso 1200 (2011) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 350 Dart (1988-89) https://motorcyclespecifications.com/moto-morini-350-dart-1988-89-specs/ Tue, 04 Apr 2023 00:47:00 +0000 https://motorcyclespecifications.com/?p=43673 The Moto Morini 350 Dart Sport is a motorcycle that was manufactured between 1988-89. It is equipped with a four-stroke 72-degree V-twin engine with a capacity of 344 cc and

The post Moto Morini 350 Dart (1988-89) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 350 Dart Sport is a motorcycle that was manufactured between 1988-89. It is equipped with a four-stroke 72-degree V-twin engine with a capacity of 344 cc and a compression ratio of 11.0:1. The bike has a max power output of 35 hp at 8,000 rpm and a max torque of 25.7 Nm at 7,000 rpm. The engine has a belt-driven single cam operating pushrod and two valves per cylinder. The bike is air-cooled and is fitted with two Dell’Orto VHBZ 25BS carburetors and Kokusan electronic ignition. The transmission is a six-speed and the final drive is by chain. The bike has 35mm Marzocchi forks for the front suspension, with a wheel travel of 150mm, and Marzocchi shocks for the rear suspension, also with a wheel travel of 150mm. The front brake is a single 230mm disc, and the rear brake is a single 136mm disc. The bike has a dry weight of 150 kg and a wet weight of 169 kg. The fuel tank capacity is 14 liters, and the average fuel consumption is 57 mpg. The standing 1/4 mile time for the bike is 15.3 sec, and the top speed is 201 km/h. The front tire size is 110/80 V16, and the rear tire size is 130/70 V17.

Technical specifications:

Make Model: Moto Morini 350 Dart Sport

Year: 1988 – 89
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 344 cc / 20.9 cu-in
Bore x Stroke: 62 x 57mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 2x Dell’Orto VHBZ 25BS carburetor
Ignition: kokusan electronic
Starting: Electric
Max Power: 35 hp / 25 kW @ 8000 rpm
Max Torque: 25.7 Nm / 19 lb-ft @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 35mm Marzocchi forks 150mm travel
Rear Suspension: Marzocchi shocks 150mm wheel travel
Front Brakes: Single 230mm disc
Rear Brakes: Single 136mm disc
Front Tyre: 110/ 80 V16
Rear Tyre: 130/70 V17
Dry Weight: 150 kg / 330 lbs
Wet Weight: 169.0 kg / 372.6 lbs
Fuel Capacity: 14 Litres / 3.7 US gal
Consumption Average: 57 mpg
Standing 1/4 Mile: 15.3 sec / 135.3 km/h
Top Speed: 201 km/h

The post Moto Morini 350 Dart (1988-89) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 501 Sei V (1980) https://motorcyclespecifications.com/moto-morini-501-sei-v-1980-specs/ Mon, 03 Apr 2023 17:02:05 +0000 https://motorcyclespecifications.com/?p=43243 The Moto Morini 501 Sei V Sport was a motorcycle produced in 1980. It had a four-stroke V-twin engine with a capacity of 478cc and a compression ratio of 11.2:1.

The post Moto Morini 501 Sei V (1980) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 501 Sei V Sport was a motorcycle produced in 1980. It had a four-stroke V-twin engine with a capacity of 478cc and a compression ratio of 11.2:1. The engine was air-cooled and had two valves per cylinder. Ignition was electronic and power was supplied by two Dell’Orto carburetors. The kick-started motorcycle had a maximum power output of 46 hp at 7500 rpm and maximum torque of 45 hp at 5100 rpm. The five-speed transmission was chain-driven with a final drive. The front suspension had telescopic forks and the rear suspension had dual shocks. Brakes consisted of two discs at the front and a single disc at the rear, with the front and rear tire sizes being 100/90-18 and 4.00-18 respectively. The wet weight of the motorcycle was 180.0 kg and it had a fuel capacity of 16 liters.

Technical specifications:

Make Model: Moto Morini 500 Sei-V Sport

Year: 1980-
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 478 cc / 29.1 cu-in
Bore x Stroke: 69 x 64.2 mm
Cooling System: Air cooled
Compression Ratio: 11.2:1
Induction: 2x 26mm Dell’Orto carburetors
Ignition: Electronic
Starting: Kick
Max Power: 46 hp / 34.3 kW @ 7500 rpm
Max Torque: 45 hp / 33.3 lb-ft @ 5100 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Dual shock
Front Brakes: 2x discs
Rear Brakes: Single disc
Front Tyre: 100/90-18
Rear Tyre: 4.00-18
Wet Weight: 180.0 kg / 396.8 lbs
Fuel Capacity: 16 Litres / 4.2 US gal

The post Moto Morini 501 Sei V (1980) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 9½ (2008-12) https://motorcyclespecifications.com/moto-morini-9%c2%bd-2008-12-specs/ Mon, 03 Apr 2023 05:13:02 +0000 https://motorcyclespecifications.com/?p=42585 The Moto Morini 9½ is a four-stroke motorcycle that was made between 2008 and 2012. It has a 1187cc engine, with a bore of 107mm and a stroke of 66mm,

The post Moto Morini 9½ (2008-12) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 9½ is a four-stroke motorcycle that was made between 2008 and 2012. It has a 1187cc engine, with a bore of 107mm and a stroke of 66mm, and can reach a compression ratio of 11.8:1. The bike uses a forced lubrication system and Magneti Marelli indirect electronic injection with a 54mm throttle body. The ignition is I.A.W. electronic and the bike starts with an electric starter. The maximum power output of the bike is 88 kW or 120 hp at 8,500 rpm, while the maximum torque is 105 Nm or 10.4 kgf-m at 6,750 rpm. The transmission has six gears and the final drive is via a chain. The bike features ALS450 steel tubular trellis with varying diameters, with 50mm Marzocchi front forks, and a single lateral fork with adjustable spring preloading at the rear. The front and rear brakes use 320mm discs with four-piston calipers and a single 220mm disc with two-piston caliper respectively. The wheels use 120/70 ZR17 and 180/55 ZR17 tyres at the front and rear respectively. The bike has a rake of 34.0 degrees and is 2170mm in length, 166mm ground clearance, and 198.0kg in dry weight, with a fuel capacity of 21 litres.

Technical specifications:

Make Model: Moto Morini 91/2

Year: 2008 – 12
Engine: Four stroke, 87 degrees V longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.5 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 11.8;1
Lubrication: Forced with trochoidal pump
Induction: Magneti Marelli indirect electronic injection with 54 mm throttle body
Ignition: I.A.W. electronic
Starting: Electric
Max Power: 88 kW / 120 hp @ 8500 rpm
Max Torque: 105 Nm / 10.4 kgf-m @ 6750 rpm
Clutch: Wet, multi-plate, anti-hopping system
Transmission: 6 Speed
Final Drive: Chain
Frame: ALS450 steel tubular trellis with varying diameters
Front Suspension: 50mm Marzocchi – upside down forks, 150mm wheel travel
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Single lateral fork with piggy back tank and adjustable spring preloading
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 180/55 ZR17
Rake: 34.0 degrees
Length: 2170 mm / 85.4 in
Ground Clearance: 166 mm / 6.5 in
Dry Weight: 198.0 kg / 436.5 lbs
Fuel Capacity: 21 Litres / 5.5 US gal

The post Moto Morini 9½ (2008-12) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini Granpasso 1200 (2014-15) https://motorcyclespecifications.com/moto-morini-granpasso-1200-2014-15-specs/ Mon, 03 Apr 2023 02:25:59 +0000 https://motorcyclespecifications.com/?p=42434 The Moto Morini Granpasso 1200 is a motorcycle produced between 2014-15. It features a four-stroke, 1187cc engine with liquid cooling, a silencer with a 3-way catalytic converter, and Magneti Marelli

The post Moto Morini Granpasso 1200 (2014-15) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini Granpasso 1200 is a motorcycle produced between 2014-15. It features a four-stroke, 1187cc engine with liquid cooling, a silencer with a 3-way catalytic converter, and Magneti Marelli fuel injection. It has a maximum power of 86kW/117hp at 8500 RPM and maximum torque of 102 Nm/10.4 kgf-m at 6750 RPM. The motorcycle has a multiplate clutch in oil bath with anti-skipping and a six-speed transmission with chain final drive. It has a Verlicchi high-strength steel tubular trellis frame and Marzocchi upside-down suspension in the front and an Ohlins single shock rear suspension with separate tank, preload, rebound, and compression adjustable. The front brakes consist of two 298mm discs and 2 piston calipers while the rear brake has a single 255mm disc and 2 piston calipers. The motorcycle has a height of 875mm, length of 2170mm, and width of 850mm with a wheelbase of 1505mm, ground clearance of 200mm, and seat height of 875mm. It has a dry weight of 210kg and a fuel capacity of 27 liters, with a reserve of 5.5 liters.

Technical specifications:

Make Model: Moto Morini Granpasso 1200

Year: 2014 – 15
Engine: Four stroke, 87 degreesV longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.4 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5:1
Exhaust: Silencer, 3-way catalytic converter with oxygen sensor
Induction: Magneti Marelli fuel injection 54 mm throttle body
Ignition: I.A.W electronic
Starting: Electric
Max Power: 86 kW / 117 hp @ 8500 rpm
Max Torque: 102 Nm / 10.4 kgf-m @ 6750 rpm
Clutch: Multiplate clutch in oil bath with antis kipping and radial master cylinder.
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 13/36 / 2nd 17/32 / 3rd 20/30 / 4th 22/28 / 5th 23/26 / 6th 24/25
Frame: Verlicchi high strength steel tubular trellis frame
Front Suspension: Marzocchi upside down with 50mm stems
Front Wheel Travel: 190 mm / 7.5 in
Rear Suspension: ~Ahlins single shock, with separate tank, preload , rebound and compression adjustable
Rear Wheel Travel: 200 mm / 7.9 in
Front Brakes: 2x 298mm discs 2 piston callipers
Rear Brakes: Single 255mm disc 2 piston caliper
Front Tyre: 110/80 ZR 19
Rear Tyre: 180/55 ZR 17
Rake: 26.5 degrees
Trail: 110 mm / 4.3 in
Dimensions: Height 875 mm / 34.4 in length 2170 mm / 85.4 in Width 850 mm / 33.5 in
Wheelbase: 1505 mm / 59.3 in
Ground Clearance: 200 mm / 7.9 in
Seat Height: 875 mm / 34,4 in
Dry Weight: 210 Kg / 463 lbs
Fuel Capacity: 27 Litres / 7,1 US gal
Reserve: 5.50 litres / 1.45 gal

The post Moto Morini Granpasso 1200 (2014-15) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 500 Maestro (1978) https://motorcyclespecifications.com/moto-morini-500-maestro-1978-specs/ Sun, 02 Apr 2023 18:59:01 +0000 https://motorcyclespecifications.com/?p=42024 The Moto Morini 500 Maestro is a motorcycle model that was released in 1978. It is equipped with a four-stroke, 72-degree V twin engine that has a capacity of 478cc.

The post Moto Morini 500 Maestro (1978) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 500 Maestro is a motorcycle model that was released in 1978. It is equipped with a four-stroke, 72-degree V twin engine that has a capacity of 478cc. The engine is belt-driven and uses a single cam to operate pushrod 2 valves per cylinder. The bike is air-cooled and has a compression ratio of 11.2:1. To power the bike, there are two 26mm Dell’Orto carburetors and electronic ignition, which can produce a maximum power of 46 hp or 34.3 kW at 7500 rpm and a maximum torque of 45 hp or 33.3 lb-ft at 5100 rpm. The bike has a five-speed transmission and a final drive through a chain. The front suspension is equipped with Telehydraulic forks, and the rear suspension is a swinging arm dual adjustable shock system. The front brakes are 2x 260mm discs, while the rear is a single 260mm disc. The front tyre for the bike is 90/90-18, and the rear is 3.50-18. The dry weight of the bike is 167 kg or 368 lbs, and with fuel and other fluids, it goes up to 184 kg or 405.7 lbs. The bike has a fuel capacity of 16 liters or 4.2 US gal.

Technical specifications:

Make Model: Moto Morini 500 Maestro

Year: 1978
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 478 cc / 29.1 cu-in
Bore x Stroke: 69 x 64.2 mm
Cooling System: Air cooled
Compression Ratio: 11.2:1
Induction: 2x 26mm Dell’Orto carburetors
Ignition: Electronic
Starting: Kick
Max Power: 46 hp / 34.3 kW @ 7500 rpm
Max Torque: 45 hp / 33.3 lb-ft @ 5100 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Telehydraulic forks
Rear Suspension: Swinging arm dual adjustable shocks
Front Brakes: 2x 260mm discs
Rear Brakes: Single 260mm disc
Front Tyre: 90/90-18
Rear Tyre: 3.50-18
Dry Weight: 167 kg / 368 lbs
Wet Weight: 184 kg / 405.7 lbs
Fuel Capacity: 16 Litres / 4.2 US gal

The post Moto Morini 500 Maestro (1978) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 500 Sport (1978-80) https://motorcyclespecifications.com/moto-morini-500-sport-1978-80-specs/ Sat, 01 Apr 2023 20:23:03 +0000 https://motorcyclespecifications.com/?p=40768 The Moto Morini 500 Sport was a motorcycle produced from 1978 to 1980. It featured a four-stroke, 72 degrees V Twin engine with a capacity of 478cc and a compression

The post Moto Morini 500 Sport (1978-80) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 500 Sport was a motorcycle produced from 1978 to 1980. It featured a four-stroke, 72 degrees V Twin engine with a capacity of 478cc and a compression ratio of 11.2:1. The ignition was electronic and it had a kick starting mechanism. The motorcycle produced a maximum power of 46 hp and a maximum torque of 45 hp. It had a five-speed transmission and a chain final drive. For suspension, it had 35mm Marzocchi forks and Marzocchi shocks with 63.5mm wheel travel. The front brakes consisted of two 260mm discs and the rear brake was a single 260mm disc. The front tire was a 90/90-18 and the rear tire was a 3.50-18. The dry weight of the motorcycle was 167 kg and the fuel capacity was 16 liters. It could reach a top speed of 83 mph and had a standing 1/4 mile time of 15.3 seconds.

Technical specifications:

Make Model: Moto Morini 500 Sport

Year: 1978 – 80
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 478 cc / 29.1 cu-in
Bore x Stroke: 69 x 64.2 mm
Cooling System: Air cooled
Compression Ratio: 11.2:1
Induction: 2x 26mm Dell’Orto carburetors
Ignition: Electronic
Starting: Kick
Max Power: 46 hp / 34.3 kW @ 7500 rpm
Max Torque: 45 hp / 33.3 lb-ft @ 5100 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 35mm Marzocchi forks, 140mm wheel travel.
Rear Suspension: Marzocchi shocks, 63.5mm wheel travel
Front Brakes: 2x 260mm discs
Rear Brakes: Single 260mm disc
Front Tyre: 90/90-18
Rear Tyre: 3.50-18
Dry Weight: 167 kg / 368 lbs
Wet Weight: 184 kg / 405.7 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Standing 1/4 Mile: 15.3 sec / 83 mph

The post Moto Morini 500 Sport (1978-80) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini Granpasso 1200 (2012-13) https://motorcyclespecifications.com/moto-morini-granpasso-1200-2012-13-specs/ Sat, 01 Apr 2023 20:06:04 +0000 https://motorcyclespecifications.com/?p=40754 The Moto Morini Granpasso 1200 (2012-13) motorcycle boasts a four-stroke, 87-degree V longitudinal twin engine with DOHC and 4 valves per cylinder. It has a capacity of 1187cc and a

The post Moto Morini Granpasso 1200 (2012-13) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini Granpasso 1200 (2012-13) motorcycle boasts a four-stroke, 87-degree V longitudinal twin engine with DOHC and 4 valves per cylinder. It has a capacity of 1187cc and a liquid cooling system. With a compression ratio of 12.5:1, the bike has a maximum power output of 86 kW at 8500 rpm and a torque of 102 Nm at 6750 rpm. The six-speed transmission has a chain final drive and gear ratios ranging from 13/36 in 1st to 24/25 in 6th. The frame is made of Verlicchi high-strength steel tubular trellis and the bike has Marzocchi upside-down suspension in the front and an Ahlins single shock in the rear. The front and rear brakes are equipped with 2 piston calipers and the bike has 110/80 ZR 19 front and 180/55 ZR 17 rear tires. With seat height of 875 mm, and length, width and height of 2170 mm, 850 mm and 875 mm, respectively, the bike measures 1505 mm in wheelbase, with 200 mm of ground clearance. Weighing 210 kg with fuel capacity of 27 litres and reserve of 5.50 litres, this motorcycle is a great choice for those looking for adventure on the road.

Technical specifications:

Make Model: Moto Morini Granpasso 1200

Year: 2012 – 13
Engine: Four stroke, 87 degreesV longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.4 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5:1
Exhaust: Silencer, 3-way catalytic converter with oxygen sensor
Induction: Magneti Marelli fuel injection 54 mm throttle body
Ignition: I.A.W electronic
Starting: Electric
Max Power: 86 kW / 117 hp @ 8500 rpm
Max Torque: 102 Nm / 10.4 kgf-m @ 6750 rpm
Clutch: Multiplate clutch in oil bath with antis kipping and radial master cylinder.
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 13/36 / 2nd 17/32 / 3rd 20/30 / 4th 22/28 / 5th 23/26 / 6th 24/25
Frame: Verlicchi high strength steel tubular trellis frame
Front Suspension: Marzocchi upside down with 50mm stems
Front Wheel Travel: 190 mm / 7.5 in
Rear Suspension: ~Ahlins single shock, with separate tank, preload , rebound and compression adjustable
Rear Wheel Travel: 200 mm / 7.9 in
Front Brakes: 2x 298mm discs 2 piston callipers
Rear Brakes: Single 255mm disc 2 piston caliper
Front Tyre: 110/80 ZR 19
Rear Tyre: 180/55 ZR 17
Rake: 26.5 degrees
Trail: 110 mm / 4.3 in
Dimensions: Height 875 mm / 34.4 in length 2170 mm / 85.4 in Width 850 mm / 33.5 in
Wheelbase: 1505 mm / 59.3 in
Ground Clearance: 200 mm / 7.9 in
Seat Height: 875 mm / 34,4 in
Dry Weight: 210 Kg / 463 lbs
Fuel Capacity: 27 Litres / 7,1 US gal
Reserve: 5.50 litres / 1.45 gal

The post Moto Morini Granpasso 1200 (2012-13) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 350 Excalibur (1988) https://motorcyclespecifications.com/moto-morini-350-excalibur-1988-specs/ Sat, 01 Apr 2023 17:22:04 +0000 https://motorcyclespecifications.com/?p=40600 The Moto Morini 350 Excalibur is a motorcycle manufactured in 1988 with a four-stroke, 72 degrees V Twin engine. It has a capacity of 344 cc and a compression ratio

The post Moto Morini 350 Excalibur (1988) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 350 Excalibur is a motorcycle manufactured in 1988 with a four-stroke, 72 degrees V Twin engine. It has a capacity of 344 cc and a compression ratio of 11.0:1, as well as an air-cooled cooling system. The motorcycle features 2x Dell’Orto VHBZ 25BS carburetors and kokusan electronic ignition. The 6-speed transmission and chain final drive allows for easy and smooth shifting, while the front suspension is a telescopic fork and the rear suspension features twin shocks with adjustable damping. The motorcycle’s front brake is a single 260mm disk and the rear brake is a single 240mm disk. The front and rear tires are 100/90-18 and 130/90-16 respectively, with a fuel capacity of 17 liters/4.5 US gallons and a wet weight of 181 kg/399 lbs. The maximum power output of this motorcycle is 35 hp/25 kW at 8,000 rpm, and the maximum torque is 25.7 Nm/19 lb-ft at 7,000 rpm.

Technical specifications:

Make Model: Moto Morini 350 Excalibur

Year: 1988
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 344 cc / 20.9 cu-in
Bore x Stroke: 62 x 57mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 2x Dell’Orto VHBZ 25BS carburetor
Ignition: kokusan electronic
Starting: Electric
Max Power: 35 hp / 25 kW @ 8000 rpm
Max Torque: 25.7 Nm / 19 lb-ft @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic fork
Rear Suspension: Twin shock with adjustable damping
Front Brakes: Single 260mm disc
Rear Brakes: Single 240mm disc
Front Tyre: 100/90-18
Rear Tyre: 130/90-16
Wet Weight: 181 kg / 399 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Moto Morini 350 Excalibur (1988) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini Corsaro 1200 Veloce (2007-09) https://motorcyclespecifications.com/moto-morini-corsaro-1200-veloce-2007-09-specs/ Sat, 01 Apr 2023 15:26:12 +0000 https://motorcyclespecifications.com/?p=40494 The Moto Morini Corsaro 1200 Veloce motorcycle was manufactured from 2007 to 2009. It has a 1187cc four-stroke engine with a 87 degree V longitudinal twin design, capable of producing

The post Moto Morini Corsaro 1200 Veloce (2007-09) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini Corsaro 1200 Veloce motorcycle was manufactured from 2007 to 2009. It has a 1187cc four-stroke engine with a 87 degree V longitudinal twin design, capable of producing 140 horsepower at 8500 rpm and 123 Nm of torque at 6500 rpm. The bike features liquid cooling, a 6-speed transmission, and a chain final drive. The frame is made of ALS450 steel tubular trellis with varying diameters, while the suspension consists of an upside-down Marzocchi front fork and a single Sachs shock absorber at the rear, both offering adjustable compression, extension, and spring pre-charge. The bike weighs 196 kg and has a seat height of 830 mm, with a ground clearance of 140 mm. It can reach a top speed of 246.2 km/h and consumes an average of 17.1 km per litre. Reviewers have praised the Corsaro 1200 Veloce for its speed and handling.

Technical specifications:

Make Model: Moto Morini Corsaro 1200 Veloce

Year: 2007 – 09
Engine: Four stroke, 87 degrees V longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.5 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 11.8;1
Lubrication: Forced with trochoidal pump
Exhaust: Sport Termignoni with double silencer, 3-way catalytic converter and oxygen sensor. Euro 3.
Induction: Magneti Marelli fuel injection 54 mm throttle body
Ignition: I.A.W. electronic
Starting: Electric
Max Power: 140 hp / 103 kW @ 8500 rpm
Max Torque: 123 Nm / 90.7 lb-ft @ 6500 rpm
Clutch: Wet, multi-plate, anti-hopping system
Transmission: 6 Speed
Final Drive: Chain
Frame: ALS450 steel tubular trellis with varying diameters
Front Suspension: Marzocchi upside down with 50mm stems, hydraulically adjustable in extension, compression and spring pre-charge on each stem. Ergal rod, floating bushing and stretched counter-spring
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: With progressive motion and single Sachs shock absorber adjustable in extension, compression and spring pre-charge with singlering-nut. Enhanced piston and stretched counter-spring, 130mm wheel travel
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 2 piston caliper
Wheels: Brembo rims in light alloy, 6 spokes
Front Tyre: 120/70 ZR 17
Rear Tyre: 180/55 ZR 17
Rake: 24.5 degrees
Trail: 103 mm / 4.1 in
Dimensions: Length 2070 mm / 81.5 in Width 810 mm / 31.9 in
Wheelbase: 1440 mm / 56.7 in
Seat Height: 830 mm / 32.7 in
Ground Clearance: 140 mm / 4.5 in
Dry Weight: 196.0 kg / 432.1 lbs
Fuel Capacity: 18 Litres / 4.7 US gal
Standing 1000 m: 21.3 sec / 225.8 km/h
Consumption average: 17.1 km/lit
Standing 1/4 Mile: 11.2 sec
Top Speed: 246.2 km/h
Reviews: Top Speed / Motociclismo – Motociclismo / Motor freaks

The post Moto Morini Corsaro 1200 Veloce (2007-09) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 500GT (1977-82) https://motorcyclespecifications.com/moto-morini-500gt-1977-82-specs/ Sat, 01 Apr 2023 11:51:02 +0000 https://motorcyclespecifications.com/?p=40299 The Moto Morini 500GT was manufactured between 1977-82 and was equipped with a four-stroke, 72-degree V-Twin engine. It was belt-driven with a single cam and operated a pushrod, 2 valves

The post Moto Morini 500GT (1977-82) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 500GT was manufactured between 1977-82 and was equipped with a four-stroke, 72-degree V-Twin engine. It was belt-driven with a single cam and operated a pushrod, 2 valves per cylinder. The bike had a capacity of 478cc and a compression ratio of 11.2:1. The engine was cooled by air and had an electronic ignition and two 26mm Dell’Orto carburetors. The motorcycle had a maximum power output of 46hp at 7500rpm and could generate a maximum torque of 45 hp at 5100 rpm.

The 5-speed transmission was powered by a chain, and the bike’s front suspension was designed with telescopic forks. The rear suspension was dual shocks and the bike had double front disc brakes of 260mm each and a single rear disc brake of 260mm. The front and rear tires were 3.25 H18 and 3.50 H18, respectively. The dry weight of the bike was 167kg, and the wet weight was 184kg, with a fuel capacity of 16 liters or 4.2 US gallons. The consumption average was 53mpg and the bike had a top speed of 107mph.

Technical specifications:

Make Model: Moto Morini 500GT

Year: 1977 – 82
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 478 cc / 29.1 cu-in
Bore x Stroke: 69 x 64.2 mm
Cooling System: Air cooled
Compression Ratio: 11.2:1
Induction: 2x 26mm Dell’Orto carburetors
Ignition: Electronic
Starting: Kick
Max Power: 46 hp / 34.3 kW @ 7500 rpm
Max Torque: 45 hp / 33.3 lb-ft @ 5100 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Dual shock
Front Brakes: 2X 260mm discs
Rear Brakes: Single 260mm disc
Front Tyre: 3.25 H18
Rear Tyre: 3.50 H18
Dry Weight: 167 kg / 368 lbs
Wet Weight: 184 kg / 405.7 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Consumption Average: 53 mpg
Top Speed: 107 mph

The post Moto Morini 500GT (1977-82) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini Corsaro 1200 ZT (2018) https://motorcyclespecifications.com/moto-morini-corsaro-1200-zt-2018-specs/ Sat, 01 Apr 2023 09:21:10 +0000 https://motorcyclespecifications.com/?p=40156 The Moto Morini Corsaro 1200ZT is a 2018 motorcycle with a four-stroke, 87-degree V longitudinal twin engine that has a capacity of 1187cc. The bike has a liquid cooling system

The post Moto Morini Corsaro 1200 ZT (2018) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini Corsaro 1200ZT is a 2018 motorcycle with a four-stroke, 87-degree V longitudinal twin engine that has a capacity of 1187cc. The bike has a liquid cooling system and a forced lubrication system with a trochoidal pump. The induction is via Magneti Marelli fuel injection with a 54mm throttle body while the engine management is via an ECU developed specifically for Moto Morini application. The bike is compliant with the Euro 4 emission standard. The motorcycle has a maximum power of 140hp at 8500 RPM and a maximum torque of 125Nm at 6750 RPM. It has a wet multi-plate clutch and a six-speed transmission with a chain final drive. The frame is a steel 25CrMo4 trellis which is welded using TIG technology. The front suspension is a 46mm up-side-down telescopic fork with 135mm of travel while the rear suspension is a single shock with pro-link to the swingarm and 120mm of travel. The front brakes are two 320mm discs with 4-piston calipers while the rear brake is a single 220mm disc with a 2-piston caliper. The bike has BOSCH MP9.1 ABS system for both wheels. The wheels are Brembo rims with six spokes, and the front and rear tyres are respectively 120/70 ZR 17 and 190/55 ZR 17 Pirelli Diablo Rosso III. The rake is 24.8 degrees, the trail is 103mm and the steering angle is 34 degrees. The bike weighs 191kg and has a fuel capacity of __. The bike is available in metallic black, metallic titanium gray and metallic racing red.

Technical specifications:

Make Model: Moto Morini Corsaro 1200ZT

Year: 2018
Engine: Four stroke, 87 degrees V longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.5 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 11.8:1
Lubrication: Forced with trochoidal pump
Exhaust: Sport Termignoni with double silencer, 3-way catalytic converter and oxygen sensor. Euro 3.
Induction: Magneti Marelli fuel injection 54 mm throttle body
Engine management: ECU by Athena, developed for Moto Morini application
Emissions: Compliant with the 168/2013 directive (Euro 4)
Starting: Electric
Max Power: 140 hp / 103 kW @ 8500 rpm
Max Torque: 125 Nm / 92.1 lb-ft @ 6750 rpm
Clutch: Wet, multi-plate, anti-hopping system
Transmission: 6 Speed
Final Drive: Chain
Frame: Steel 25CrMo4 trellis, welded with TIG technology
Front Suspension: 46 mm Upsidedown telescopic fork fully adjustable as per preload, damping in compression and rebound, exclusively produced for Moto Morini by MUPO Race Suspension
Front Wheel Travel: 135 mm / 5.3 in
Rear Suspension: Single shock with prolink to swingarm, fully adjustable in preload (hydraulic remote command), height, rebound damping, exclusively produced for Moto Morini by MUPO Race Suspension
Rear Wheel Travel: 120 mm / 4.7 in
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 2 piston caliper
ABS: BOSCH MP9.1 system on both wheels, removable by rider handlebar command
Wheels: Brembo rims in light alloy, 6 spokes
Front Rim: 3,50 x17 aluminium forged rim (3,50 x17 tubeless spoked rim as alternative)
Rear Rim: 6,00 x17 aluminium forged rim (5,50 x17 tubeless spoked rim as alternative)
Front Tyre: 120/70 ZR 17 Pirelli Diablo Rosso III
Rear Tyre: 190/55 ZR 17 Pirelli Diablo Rosso III ( 180/55-17 as alternative on spoked rims)
Rake: 24.8 degrees
Trail: 103 mm / 4.1 in
Steering Angle: 34 degrees
Dimensions: Length 2070 mm / 81.5 in Width 810 mm / 31.9 in
Wheelbase: 1450 mm / 57.0 in
Seat Height: 860 mm / 33.8 in
Ground Clearance: 150 mm / 5.9 in
Dry Weight: 191 kg / 421 lbs
Fuel Capacity:

The post Moto Morini Corsaro 1200 ZT (2018) appeared first on MotorcycleSpecifications.com.

]]> MOTO MORINI 1200 SPORT (2008-09) https://motorcyclespecifications.com/moto-morini-1200-sport-2008-09-specs/ Sat, 01 Apr 2023 03:26:06 +0000 https://motorcyclespecifications.com/?p=39829 The Moto Morini Sport 1200 motorcycle was produced for the 2008-09 year. It has a four-stroke, 87-degree V longitudinal twin engine with a capacity of 1187cc and a compression ratio

The post MOTO MORINI 1200 SPORT (2008-09) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini Sport 1200 motorcycle was produced for the 2008-09 year. It has a four-stroke, 87-degree V longitudinal twin engine with a capacity of 1187cc and a compression ratio of 12.5:1. The bike has Magneti Marelli fuel injection with a 54mm throttle body and I.A.W. electronic ignition. It has a maximum power of 86kW / 117hp at 8500rpm and a maximum torque of 102Nm / 10.4kgf-m at 6750rpm. The clutch is a multiplate design in oil bath with an anti-skipping mechanism and radial master cylinder. The transmission is a six-speed, and the final drive is by chain. It has a Verlicchi high-strength steel tubular trellis frame and Marzocchi upside-down suspension with 50mm stems in the front and a progressive linkage with Sachs adjustable suspension in the back. Front brakes consist of 2x 320mm discs with 4-piston calipers, while the rear uses a single 220mm disc with a 2-piston caliper. The wheels are equipped with 120/70 ZR 17 and 180/55 ZR 17 front and back tires, respectively. It measures 2180mm (length) x 865mm (width) with a wheelbase of 1500mm and a seat height of 840mm. It weighs 198kg (dry) with a fuel capacity of 18 litres. The bike can accelerate from 0 to 60mph in 3.8 seconds and completes a standing quarter-mile in 11.6 seconds; it has a top speed of 229.2 km/h.

Technical specifications:

Make Model: Moto Morini Sport 1200

Year: 2008 – 09
Engine: Four stroke, 87 degrees V longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.5 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5:1
Lubrication: Forced with trochoidal pump
Induction: Magneti Marelli fuel injection 54 mm throttle body
Ignition: I.A.W. electronic
Starting: Electric
Max Power: 86 kW / 117 hp @ 8500 rpm
Max Torque: 102 Nm / 10.4 kgf-m @ 6750 rpm
Clutch: Multiplate clutch in oil bath with antis kipping and radial master cylinder.
Transmission: 6 Speed
Final Drive: Chain
Frame: Verlicchi high strength steel tubular trellis frame
Front Suspension: Marzocchi upside down with 50mm stems, 152mm wheel travel.
Rear Suspension: Progressive linkage wit Sachs Adjustable in rebound, compression spring loading, 150mm wheel travel
Front Brakes: 2x 320mm discs 4 piston callipers
Rear Brakes: Single 220mm disc 2 piston caliper
Front Tyre: 120/70 ZR 17
Rear Tyre: 180/55 ZR 17
Dimensions: Length 2180 mm / 85.8 in Width 865 mm / 34.1 in
Wheelbase: 1,500 mm / 59.1 in
Seat Height: 840 mm / 33.1 in
Ground Clearance: 162 mm / 6.4 in
Dry Weight: 198 kg / 436 lbs
Fuel Capacity: 18 Litres / 4.7 US gal
Standing 1/4 Mile: 11.6 sec
Top Speed: 229.2 km/h

The post MOTO MORINI 1200 SPORT (2008-09) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini Granpasso 1200 (2009-10) https://motorcyclespecifications.com/moto-morini-granpasso-1200-2009-10-specs/ Sat, 01 Apr 2023 01:57:25 +0000 https://motorcyclespecifications.com/?p=39746 The Moto Morini Granpasso H83 is a motorcycle model from 2009-10. It has a four-stroke engine with a capacity of 1187 cc and a compression ratio of 12.5:1. The bike

The post Moto Morini Granpasso 1200 (2009-10) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini Granpasso H83 is a motorcycle model from 2009-10. It has a four-stroke engine with a capacity of 1187 cc and a compression ratio of 12.5:1. The bike is liquid-cooled and uses Magneti Marelli fuel injection with a 54 mm throttle body for induction. The ignition is electronic with an I.A.W. system, and it has electric starting. The maximum power is 86 kW at 8500 rpm, and the maximum torque is 102 Nm at 6750 rpm. The clutch is multiplate and in an oil bath with an anti-skipping and radial master cylinder. The bike has a six-speed transmission with a final drive chain. The frame is a Verlicchi high-strength steel tubular trellis frame. For suspension, the front uses a Marzocchi upside-down fork with 50mm stem and 190mm wheel travel, while the rear has an Ohlins single shock with separate tank, preload, rebound, and compression adjustable, and 200mm wheel travel. The brakes are two 298mm discs with 2 piston calipers in the front and a single 255mm disc with a 2 piston caliper in the rear. The front and rear tires are 110/80 ZR19 and 180/55 ZR17, respectively. The length of the bike is 2,170mm with a seat height of 830mm and a ground clearance of 200mm. The dry weight of the bike is 210.0kg with a fuel capacity of 27 liters. It has a consumption average of 18.1 km/lit and a top speed of 218.9 km/h. Its standing 1/4 mile is 12.1 sec.

Technical specifications:

Make Model: Moto Morini Granpasso H83

Year: 2009 – 10
Engine: Four stroke, 87 degrees V longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.5 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5:1
Lubrication: Forced with trochoidal pump
Induction: Magneti Marelli fuel injection 54 mm throttle body
Ignition: I.A.W. electronic
Starting: Electric
Max Power: 86 kW / 117 hp @ 8500 rpm
Max Torque: 102 Nm / 10.4 kgf-m @ 6750 rpm
Clutch: Multiplate clutch in oil bath with antis kipping and radial master cylinder.
Transmission: 6 Speed
Final Drive: Chain
Frame: Verlicchi high strength steel tubular trellis frame
Front Suspension: Marzocchi upside down with 50mm stems, 190mm wheel travel.
Rear Suspension: ~Ahlins single shock, with separate tank, preload , rebound and compression adjustable, 200mm wheel travel
Front Brakes: 2x 298mm discs 2 piston callipers
Rear Brakes: Single 255mm disc 2 piston caliper
Front Tyre: 110/80 ZR 19
Rear Tyre: 180/55 ZR 17
Dimensions: Length 2,170 mm / 85.4 in
Seat Height: 830 mm / 32.7 in
Ground Clearance: 200 mm / 7.9 in
Dry Weight: 210.0 kg / 463 lbs
Fuel Capacity: 27 Litres / 7.1 US gal
Consumption average: 18.1 km/lit
Standing 1/4 Mile: 12.1 sec
Top Speed: 218.9 km/h
Consumption Average: 18.1 km/lit
Standing 1/4 Mile: 12.1 sec
Top Speed: 218.9 km/h

The post Moto Morini Granpasso 1200 (2009-10) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 350 X2 Kanguro (1984-88) https://motorcyclespecifications.com/moto-morini-350-x2-kanguro-1984-88-specs/ Fri, 31 Mar 2023 14:12:01 +0000 https://motorcyclespecifications.com/?p=39105 The Moto Morini 350 X2 and X3 Kanguro were produced from 1984 to 1988. It has a four-stroke, 72-degree V-twin engine with a capacity of 344 cc and a compression

The post Moto Morini 350 X2 Kanguro (1984-88) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 350 X2 and X3 Kanguro were produced from 1984 to 1988. It has a four-stroke, 72-degree V-twin engine with a capacity of 344 cc and a compression ratio of 11.0:1. It has 2 valve per cylinder pushrod operation, dual Dell’Orto VHBZ 25BS carburettors and an electronic Kokusan ignition. It has a maximum power of 35hp at 8000rpm, and a maximum torque of 25.7 Nm at 7000 rpm. The transmission is a 6-speed, with a chain final drive. The bike has 35mm Marzocchi front forks and a Marzocchi monoshock rear suspension, as well as single disc brakes on both the front (230mm) and rear (136mm) wheels. The front and rear tyres are 3.00 V21 and 4.00 V18, respectively. The bike has a wet weight of 160.0 kg and a fuel capacity of 14 litres.

Technical specifications:

Make Model: Moto Morini 350 X2 / X3 Kanguro

Year: 1984 – 88
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 344 cc / 20.9 cu-in
Bore x Stroke: 62 x 57mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 2x Dell’Orto VHBZ 25BS carburetor
Ignition: kokusan electronic
Starting: Electric
Max Power: 35 hp / 25 kW @ 8000 rpm
Max Torque: 25.7 Nm / 19 lb-ft @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 35mm Marzocchi forks
Rear Suspension: Marzocchi monoshock
Front Brakes: Single 230mm disc
Rear Brakes: Single 136mm disc
Front Tyre: 3.00 V21
Rear Tyre: 4.00 V18
Wet Weight: 160.0 kg / 352. lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Moto Morini 350 X2 Kanguro (1984-88) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 501 Coguaro (1989) https://motorcyclespecifications.com/moto-morini-501-coguaro-1989-specs/ Fri, 31 Mar 2023 09:49:03 +0000 https://motorcyclespecifications.com/?p=38858 The Moto Morini 501 Coguaro is a motorcycle model from 1989 with a four stroke, 72-degree V-twin engine, belt-driven single cam, and 2 valves per cylinder. The bike has a

The post Moto Morini 501 Coguaro (1989) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 501 Coguaro is a motorcycle model from 1989 with a four stroke, 72-degree V-twin engine, belt-driven single cam, and 2 valves per cylinder. The bike has a capacity of 507 cc and a compression ratio of 11.5:1. It has 2 Dell’Orto carburetors, electronic ignition and an electric starter, while the wet, cable-operated clutch is managed by a 6-speed transmission. The Morini 501 Coguaro features front telescopic forks and an alloy swinging arm single shocks suspension at the rear, with a single 260mm disc and single 230mm disc brake. The front and rear tires are 3.00-21 and 4.00-18 respectively, while the wet weight measures 203 kg/47.5 lbs, and it has a 22-liter/5.8 US gal fuel capacity. It has a maximum power of 42 hp/31 kW @ 8500 rpm. The motorcycle was tested in the Adventure Group test Motosprint in 1988 and 1989.

Technical specifications:

Make Model: Moto Morini 501 Coguaro

Year: 1989 –
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 507 cc / 30.9 cu-in
Bore x Stroke: 71 x 64 mm
Cooling System: Air cooled
Compression Ratio: 11.5:1
Induction: 2x Dell’Orto carburetor
Ignition: Electronic
Starting: Electric
Max Power: 42 hp / 31 kW @ 8500 rpm
Clutch: Wet, cable operated
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Alloy swinging arm single shocks
Front Brakes: Single 260mm disc
Rear Brakes: Single 230mm disc
Front Tyre: 3.00-21
Rear Tyre: 4.00-18
Wet weight: 203 kg / 47.5 lbs
Fuel Capacity: 22 Litres / 5.8 US gal
Road Test: Adventure Group test Motosprint 1988 Adventure Group Test Motosprint 1989

The post Moto Morini 501 Coguaro (1989) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 350 Coguaro (1988) https://motorcyclespecifications.com/moto-morini-350-coguaro-1988-specs/ Fri, 31 Mar 2023 07:28:01 +0000 https://motorcyclespecifications.com/?p=38729 The Moto Morini 350 Coguaro is a motorcycle from 1988 with a four stroke, 72 degrees V Twin engine. It has a capacity of 344 cc and a compression ratio

The post Moto Morini 350 Coguaro (1988) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 350 Coguaro is a motorcycle from 1988 with a four stroke, 72 degrees V Twin engine. It has a capacity of 344 cc and a compression ratio of 11.0:1. The bike is air cooled and features 2x Dell’Orto VHBZ 25BS carburetors and a kokusan electronic ignition. The maximum power output is 35 hp at 8000 rpm, with a maximum torque of 25.7 Nm at 7000 rpm. It has a six-speed transmission with a final drive of a chain. The front suspension consists of telescopic forks, while the rear suspension is an alloy swinging arm with single shocks. It also has a front and rear brake system with single discs, as well as front and rear tires of 3.00-21 and 4.00-18 respectively. The motorcycle weighs in at a dry weight and has a fuel capacity of 22 litres or 5.8 US gallons.

Technical specifications:

Make Model: Moto Morini 350 Coguaro

Year: 1988
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 344 cc / 20.9 cu-in
Bore x Stroke: 62 x 57mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 2x Dell’Orto VHBZ 25BS carburetor
Ignition: kokusan electronic
Starting: Electric
Max Power: 35 hp / 25 kW @ 8000 rpm
Max Torque: 25.7 Nm / 19 lb-ft @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Alloy swinging arm single shocks
Front Brakes: Single 260mm disc
Rear Brakes: Single 230mm disc
Front Tyre: 3.00-21
Rear Tyre: 4.00-18
Dry Weight:
Fuel Capacity: 22 Litres / 5.8 US gal

The post Moto Morini 350 Coguaro (1988) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 350 X4 Kanguro (1989) https://motorcyclespecifications.com/moto-morini-350-x4-kanguro-1989-specs/ Fri, 31 Mar 2023 06:48:01 +0000 https://motorcyclespecifications.com/?p=38691 The Moto Morini 350 X4 Kanguro is a motorcycle model that was released in 1989. The engine is a four-stroke, 72 degrees V Twin that has 2 valves per cylinder

The post Moto Morini 350 X4 Kanguro (1989) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 350 X4 Kanguro is a motorcycle model that was released in 1989. The engine is a four-stroke, 72 degrees V Twin that has 2 valves per cylinder and is belt-driven with a single cam operating pushrod. The capacity of the engine is 344cc or 20.9 cubic inches with a bore and stroke of 62 x 57mm. The cooling system is air-cooled and the compression ratio is 11.0:1. The bike has 2x Dell’Orto VHBZ 25BS carburetors and kokusan electronic ignition. The maximum power the bike can produce is 35 horsepower or 25 kW at 8000 rpm, while the maximum torque is 25.7 Nm or 19 lb-ft at 7000 rpm. The bike has a 6-speed transmission and uses a chain for the final drive. It has a 35mm Marzocchi front fork suspension and monoshock Marzocchi rear suspension. The front brakes have a single 230mm disc while the rear brakes have a single 136mm disc. The bike uses a 3.00 V21 front tire and a 4.00 V18 rear tire. The wet weight of the bike is 160.0 kg or 352 lbs and it has a fuel capacity of 14 liters or 3.7 US gallons.

Technical specifications:

Make Model: Moto Morini 350 X4 Kanguro

Year: 1989 –
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 344 cc / 20.9 cu-in
Bore x Stroke: 62 x 57mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 2x Dell’Orto VHBZ 25BS carburetor
Ignition: kokusan electronic
Starting: Electric
Max Power: 35 hp / 25 kW @ 8000 rpm
Max Torque: 25.7 Nm / 19 lb-ft @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 35mm Marzocchi forks
Rear Suspension: Marzocchi monoshock
Front Brakes: Single 230mm disc
Rear Brakes: Single 136mm disc
Front Tyre: 3.00 V21
Rear Tyre: 4.00 V18
Wet Weight: 160.0 kg / 352. lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Moto Morini 350 X4 Kanguro (1989) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini New York 500 (1989) https://motorcyclespecifications.com/moto-morini-new-york-500-1989-specs/ Fri, 31 Mar 2023 03:10:00 +0000 https://motorcyclespecifications.com/?p=38492 The Moto Morini New York 501 Custom is a 1989 motorcycle powered by a four-stroke, 72 degree V-twin engine with a capacity of 507cc, producing 42 horsepower at 8500 rpm.

The post Moto Morini New York 500 (1989) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini New York 501 Custom is a 1989 motorcycle powered by a four-stroke, 72 degree V-twin engine with a capacity of 507cc, producing 42 horsepower at 8500 rpm. The engine is belt driven and has a single cam operating pushrod with 2 valves per cylinder. The bike is air cooled and has a compression ratio of 11.5:1, with two Dell’Orto carburetors and electronic ignition. It features a wet, cable-operated clutch and a 6-speed transmission with chain final drive. The suspension includes telescopic forks at the front and dual shocks at the rear. The brakes consist of two 260mm discs at the front and a single 260mm disc at the rear. The bike weighs 177kg and has a fuel capacity of 16 litres. The front tyre is 90/90-19 and the rear is 130/90-16. Overall, the Moto Morini New York 501 Custom is a powerful and stylish motorcycle with impressive specs and design for its time.

Technical specifications:

Make Model: Moto Morini New York 501 Custom

Year: 1989
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 507 cc / 30.9 cu-in
Bore x Stroke: 71 x 64 mm
Cooling System: Air cooled
Compression Ratio: 11.5:1
Induction: 2x Dell’Orto carburetor
Ignition: Electronic
Starting: Electric
Max Power: 42 hp / 31 kW @ 8500 rpm
Clutch: Wet, cable operated
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Dual shocks
Front Brakes: 2x 260mm disc
Rear Brakes: Single 260mm disc
Front Tyre: 90/90-19
Rear Tyre: 130/90-16
Wet Weight: 177 kg / 390.2 lbs
Fuel Capacity: 16 Litres / 4.2 US gal

The post Moto Morini New York 500 (1989) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 500 Turbo (1981) https://motorcyclespecifications.com/moto-morini-500-turbo-1981-specs/ Fri, 31 Mar 2023 00:17:57 +0000 https://motorcyclespecifications.com/?p=38330 The Moto Morini 500 Turbo is a motorcycle from 1981 with a four-stroke V-twin engine, which is belt-driven and has a single cam operating pushrod with two valves per cylinder.

The post Moto Morini 500 Turbo (1981) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 500 Turbo is a motorcycle from 1981 with a four-stroke V-twin engine, which is belt-driven and has a single cam operating pushrod with two valves per cylinder. It is also turbocharged, with a capacity of 478cc and a compression ratio that is not specified. The bike has a single Dellorto PHB36BS induction and electronic ignition, with electric starting. The maximum power output is 70.5 hp at 8300 rpm, and the maximum torque is 64.5 Nm at 5600 rpm. The transmission is five-speed, and the final drive is via chain. The suspension is provided by a telehydraulic fork at the front with 140mm wheel travel, and adjustable gas-charged shocks with 100mm wheel travel at the rear. The front brakes consist of two 260mm discs with two-piston calipers, while the rear brake has a single 260mm disc with a one-piston caliper. The tires are 100/90-18 at the front and 120/90-18 at the rear. The dry weight of the bike is 182.5kg, and it has a fuel capacity that is not specified. This motorcycle is a prototype of the Moto Morini 500 Turbo.

Technical specifications:

Make Model: Moto Morini 500 Turbo

Year: 1981
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder , Turbocharged
Capacity: 478 cc / 29.1 cu-in
Bore x Stroke: 69 x 64.2 mm
Cooling System: Air cooled
Compression Ratio:
Induction: Single Dellorto PHB36BS
Ignition: Electronic
Starting: Electric
Max Power: 70.5 hp @ 8300 rpm
Max Torque: 64.5 Nm @ 5600 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Telehydraulic fork
Front Wheel Travel: 140 mm /
Rear Suspension: Adjustable gas charged shocks 100mm wheel travel
Rear Wheel Travel: 100 mm / 3.9 in
Front Brakes: 2x 260 mm discs 2 piston calipers
Rear Brakes: Single 260 mm disc 1 piston caliper
Front Tyre: 100/90-18
Rear Tyre: 120/90-18
Dry Weight: 182.5 kg
Fuel Capacity:
Overview: The Moto Morini 500 Turbo (prototype)

The post Moto Morini 500 Turbo (1981) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 500 Camel (1981-84) https://motorcyclespecifications.com/moto-morini-500-camel-1981-84-specs/ Thu, 30 Mar 2023 22:41:56 +0000 https://motorcyclespecifications.com/?p=38242 The Moto Morini 500 Camel is a motorcycle model produced from 1981 to 1984. The bike has a four-stroke, V-twin engine with a capacity of 478cc and a compression ratio

The post Moto Morini 500 Camel (1981-84) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 500 Camel is a motorcycle model produced from 1981 to 1984. The bike has a four-stroke, V-twin engine with a capacity of 478cc and a compression ratio of 11.2:1. It is air-cooled and has two Dell’Orto carburetors. The bike is kick-started and has a maximum power output of 39 hp at 7400 rpm. It has a six-speed transmission and a final chain drive. The front suspension is telehydraulic forks and the rear suspension is a swing arm with an adjustable shock absorber. The front and rear brakes are 140mm drums. The bike weighs 137kg with a fuel capacity of 15 liters.

Technical specifications:

Make Model: Moto Morini 500 Camel

Year: 1981 – 84
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 478 cc / 29.1 cu-in
Bore x Stroke: 69 x 64.2 mm
Cooling System: Air cooled
Compression Ratio: 11.2:1
Induction: 2x Dell’Orto VHBH 26BS carburetors
Ignition: Electronic
Starting: Kick
Max Power: 39 hp / 27.7 kW @ 7400 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telehydraulic forks
Rear Suspension: Swing arm wit adjustable shock absorber.
Front Brakes: 140mm Drum
Rear Brakes: 140mm Drum
Front Tyre: 3.00-21
Rear Tyre: 4.00-18
Dry Weight: 137 kg / 300 lbs
Fuel Capacity: 15 Litres / 3.4 US gal

The post Moto Morini 500 Camel (1981-84) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 500 Sport (1981-83) https://motorcyclespecifications.com/moto-morini-500-sport-1981-83-specs/ Thu, 30 Mar 2023 21:50:01 +0000 https://motorcyclespecifications.com/?p=38193 The Moto Morini 500 Sport was produced between 1981 and 1983. It boasts a four-stroke, 72-degree V-twin engine with a capacity of 478cc and a compression ratio of 11.2:1. The

The post Moto Morini 500 Sport (1981-83) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 500 Sport was produced between 1981 and 1983. It boasts a four-stroke, 72-degree V-twin engine with a capacity of 478cc and a compression ratio of 11.2:1. The engine is belt-driven, with a single cam operating pushrod and 2 valves per cylinder. The bike is cooled by air and has 2x 26mm Dell’Orto carburetors for induction. The electronic ignition system is kick-started, and it generates a maximum power of 46hp at 7500rpm and a torque of 45hp at 5100rpm. It has a 5-speed transmission and a chain final drive. The front suspension features 35mm Marzocchi forks, while the rear suspension uses Marzocchi shocks. With a dry weight of 167kg, the bike is relatively lightweight, and it has a fuel capacity of 16 litres. It can reach a maximum speed of 83mph, and it can complete standing quarter-miles in 15.3 seconds. The bike has 2x 260mm discs as front brakes and a single 260mm disc at the rear. It features a 90/90-18 front tire and a 3.50-18 rear tire.

Technical specifications:

Make Model: Moto Morini 500 Sport

Year: 1981 – 83
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 478 cc / 29.1 cu-in
Bore x Stroke: 69 x 64.2 mm
Cooling System: Air cooled
Compression Ratio: 11.2:1
Induction: 2x 26mm Dell’Orto carburetors
Ignition: Electronic
Starting: Kick
Max Power: 46 hp / 34.3 kW @ 7500 rpm
Max Torque: 45 hp / 33.3 lb-ft @ 5100 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 35mm Marzocchi forks, 140mm wheel travel.
Rear Suspension: Marzocchi shocks, 63.5mm wheel travel
Front Brakes: 2x 260mm discs
Rear Brakes: Single 260mm disc
Front Tyre: 90/90-18
Rear Tyre: 3.50-18
Dry Weight: 167 kg / 368 lbs
Wet Weight: 184 kg / 405.7 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Standing 1/4 Mile: 15.3 sec / 83 mph

The post Moto Morini 500 Sport (1981-83) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 501 Excalibur (1986) https://motorcyclespecifications.com/moto-morini-501-excalibur-1986-specs/ Thu, 30 Mar 2023 15:49:05 +0000 https://motorcyclespecifications.com/?p=37855 The Moto Morini 501 Excalibur is a motorcycle model from 1986 with a four-stroke, 72 degrees V twin engine that operates pushrod 2 valves per cylinder. It has a capacity

The post Moto Morini 501 Excalibur (1986) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 501 Excalibur is a motorcycle model from 1986 with a four-stroke, 72 degrees V twin engine that operates pushrod 2 valves per cylinder. It has a capacity of 507 cc and a bore of 71 mm and a stroke of 64 mm. The cooling system is air cooled and has a compression ratio of 11.5:1. The induction is through 2 Dell’Orto carburetors and the ignition is electronic. The motorcycle has a starting system through electricity and a maximum power of 42 hp at 8500 rpm. It has a wet, cable operated clutch and a 6-speed transmission. The final drive is through a chain mechanism. The motorcycle has front telescopic forks and rear dual shocks suspension. The front brakes have 2x 260mm disc brakes and the rear has a single 260mm disc brake. The front and rear tires have a size of 100/90-18 and 130/90-16 respectively. Its weight is 193 kg with a fuel capacity of 17 liters.

Technical specifications:

Make Model: Moto Morini 501 Excalibur

Year: 1986
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 507 cc / 30.9 cu-in
Bore x Stroke: 71 x 64 mm
Cooling System: Air cooled
Compression Ratio: 11.5:1
Induction: 2x Dell’Orto carburetor
Ignition: Electronic
Starting: Electric
Max Power: 42 hp / 31 kW @ 8500 rpm
Clutch: Wet, cable operated
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Dual shocks
Front Brakes: 2x 260mm disc
Rear Brakes: Single 260mm disc
Front Tyre: 100/90-18
Rear Tyre: 130/90-16
Wet Weight: 193 kg / 425.5 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Moto Morini 501 Excalibur (1986) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 500 Sport (1984-86) https://motorcyclespecifications.com/moto-morini-500-sport-1984-86-specs/ Thu, 30 Mar 2023 14:41:02 +0000 https://motorcyclespecifications.com/?p=37790 The Moto Morini 500 Sport is a motorcycle manufactured from 1984 to 1986. It has a four-stroke V-twin engine with a capacity of 478 cc, delivering 46 hp at 7500

The post Moto Morini 500 Sport (1984-86) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 500 Sport is a motorcycle manufactured from 1984 to 1986. It has a four-stroke V-twin engine with a capacity of 478 cc, delivering 46 hp at 7500 rpm and a torque of 45 hp at 5100 rpm. The engine features a belt-driven single cam operating pushrod and two valves per cylinder. The bike is air-cooled, has a compression ratio of 11.2:1 and is equipped with 2x 26mm Dell’Orto carburetors and electronic ignition. It has a 5-speed transmission and a chain final drive. The front suspension consists of 35mm Marzocchi forks with 140mm wheel travel and the rear suspension includes Marzocchi shocks with 63.5mm wheel travel. Braking is provided by twin 260mm discs at the front and a single 260mm disc at the rear. The bike features a 90/90-18 front tire and 3.50-18 rear tire. It has a dry weight of 167 kg and a wet weight of 184 kg, with a fuel capacity of 16 liters. The bike has a standing 1/4 mile time of 15.3 seconds at a speed of 83 mph.

Technical specifications:

Make Model: Moto Morini 500 Sport

Year: 1984 – 86
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 478 cc / 29.1 cu-in
Bore x Stroke: 69 x 64.2 mm
Cooling System: Air cooled
Compression Ratio: 11.2:1
Induction: 2x 26mm Dell’Orto carburetors
Ignition: Electronic
Starting: Kick
Max Power: 46 hp / 34.3 kW @ 7500 rpm
Max Torque: 45 hp / 33.3 lb-ft @ 5100 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: 35mm Marzocchi forks, 140mm wheel travel.
Rear Suspension: Marzocchi shocks, 63.5mm wheel travel
Front Brakes: 2x 260mm discs
Rear Brakes: Single 260mm disc
Front Tyre: 90/90-18
Rear Tyre: 3.50-18
Dry Weight: 167 kg / 368 lbs
Wet Weight: 184 kg / 405.7 lbs
Fuel Capacity: 16 Litres / 4.2 US gal
Standing 1/4 Mile: 15.3 sec / 83 mph

The post Moto Morini 500 Sport (1984-86) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini Corsaro 1200 (2005) https://motorcyclespecifications.com/moto-morini-corsaro-1200-2005-specs/ Thu, 30 Mar 2023 11:32:01 +0000 https://motorcyclespecifications.com/?p=37616 The Moto Morini Corsaro 1200 motorcycle, manufactured in 2005, has a four-stroke engine with a capacity of 1187cc and a maximum power of 140hp at 85000 rpm. It has a

The post Moto Morini Corsaro 1200 (2005) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini Corsaro 1200 motorcycle, manufactured in 2005, has a four-stroke engine with a capacity of 1187cc and a maximum power of 140hp at 85000 rpm. It has a liquid cooling system and a compression ratio of 11.8:1. The bike features a Magneti Marelli fuel injection system and an I.A.W. electronic ignition. It has a six-speed transmission and its final drive is through a chain. The frame of the bike is a steel tubular trellis with varying diameters. The bike has an upside-down Marzocchi front suspension with 50mm stems and a rear suspension with a progressive motion and a single Sachs shock absorber. The brakes are dual 320mm discs with four-piston calipers at the front and a single 220mm disc with a two-piston caliper at the rear. The wheels are Brembo rims in light alloy with six spokes. The front tyre measures 120/70 ZR 17, while the rear tyre measures 180/55 ZR 17. The bike has a length of 2070mm, a width of 810mm, and a wheelbase of 1440mm. Its dry weight is 196.0kg, and it has a fuel capacity of 18 litres. The bike has a top speed of 233.8km/h and can reach 1000m in 21.3 seconds, with a speed of 225.8km/h. Its 1/4 mile time is 11.3 seconds, with a speed of 199.9km/h.

Technical specifications:

Make Model: Moto Morini Corsaro 1200

Year: 2005
Engine: Four stroke, 87 degrees V longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.5 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 11.8;1
Lubrication: Forced with trochoidal pump
Exhaust: Sport Termignoni with double silencer, 3-way catalytic converter and oxygen sensor. Euro 3.
Induction: Magneti Marelli fuel injection 54 mm throttle body
Ignition: I.A.W. electronic
Starting: Electric
Max Power: 140 hp / 103 kW @ 8500 rpm
Max Torque: 123 Nm / 90.7 lb-ft @ 6500 rpm
Clutch: Wet, multi-plate, anti-hopping system
Transmission: 6 Speed
Final Drive: Chain
Frame: ALS450 steel tubular trellis with varying diameters
Front Suspension: Marzocchi upside down with 50mm stems, hydraulically adjustable in extension, compression and spring pre-charge on each stem. Ergal rod, floating bushing and stretched counter-spring
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: With progressive motion and single Sachs shock absorber adjustable in extension, compression and spring pre-charge with singlering-nut. Enhanced piston and stretched counter-spring, 130mm wheel travel
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 2 piston caliper
Wheels: Brembo rims in light alloy, 6 spokes
Front Tyre: 120/70 ZR 17
Rear Tyre: 180/55 ZR 17
Rake: 24.5 degrees
Trail: 103 mm / 4.1 in
Dimensions: Length 2070 mm / 81.5 in Width 810 mm / 31.9 in
Wheelbase: 1440 mm / 56.7 in
Seat Height: 830 mm / 32.7 in
Ground Clearance: 140 mm / 4.5 in
Dry Weight: 196.0 kg / 432.1 lbs
Fuel Capacity: 18 Litres / 4.7 US gal
Standing 1000 m: 21.3 sec / 225.8 km/h
Standing 1/4 Mile: 11.3 sec / 199.9 km/h
Top Speed: 233.8 km/h

The post Moto Morini Corsaro 1200 (2005) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini Rebello 1200 Giubileo (2012) https://motorcyclespecifications.com/moto-morini-rebello-1200-giubileo-2012-specs/ Thu, 30 Mar 2023 07:50:02 +0000 https://motorcyclespecifications.com/?p=37408 The 2012 Moto Morini Rebello 1200 Giubileo motorcycle features a four-stroke 87 degrees V longitudinal twin engine with a capacity of 1187 cc/72.5 cu-in, and a liquid cooling system. Its

The post Moto Morini Rebello 1200 Giubileo (2012) appeared first on MotorcycleSpecifications.com.

]]> The 2012 Moto Morini Rebello 1200 Giubileo motorcycle features a four-stroke 87 degrees V longitudinal twin engine with a capacity of 1187 cc/72.5 cu-in, and a liquid cooling system. Its maximum power is 86 kW/117 hp at 8500 rpm, and its maximum torque is 102 Nm/10.4 kgf-m at 6750 rpm. The bike has a multiplate clutch in oil bath with antis kipping and radial master cylinder, a six-speed transmission, and a chain final drive. It also has a Verlicchi high strength steel tubular trellis frame and front suspension with a Marzocchi upside-down fork with 50mm stems and a 152mm wheel travel. The rear suspension is a progressive linkage with Sachs adjustable rebound, compression spring loading, and a 150mm wheel travel. The front brakes are dual 320mm discs with four-piston calipers, and the rear brakes are a single 220mm disc with a two-piston caliper. The motorcycle’s front tire size is 120/70 ZR 17, and its rear tire size is 180/55 ZR 17. Its seat height and fuel capacity are not specified.

Technical specifications:

Make Model: Moto Morini Rebello 1200 Giubileo

Year: 2012
Engine: Four stroke, 87 degrees V longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.5 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5:1
Lubrication: Forced with trochoidal pump
Induction: Magneti Marelli fuel injection 54 mm throttle body
Ignition: I.A.W. electronic
Starting: Electric
Max Power: 86 kW / 117 hp @ 8500 rpm
Max Torque: 102 Nm / 10.4 kgf-m @ 6750 rpm
Clutch: Multiplate clutch in oil bath with antis kipping and radial master cylinder.
Transmission: 6 Speed
Final Drive: Chain
Frame: Verlicchi high strength steel tubular trellis frame
Front Suspension: Marzocchi upside down with 50mm stems, 152mm wheel travel.
Rear Suspension: Progressive linkage wit Sachs Adjustable in rebound, compression spring loading, 150mm wheel travel
Front Brakes: 2x 320mm discs 4 piston callipers
Rear Brakes: Single 220mm disc 2 piston caliper
Front Tyre: 120/70 ZR 17
Rear Tyre: 180/55 ZR 17
Seat Height:
Dry Weight:
Fuel Capacity:

The post Moto Morini Rebello 1200 Giubileo (2012) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 9½ Concept (2005) https://motorcyclespecifications.com/moto-morini-9%c2%bd-concept-2005-specs/ Wed, 29 Mar 2023 20:18:59 +0000 https://motorcyclespecifications.com/?p=36754 The Moto Morini 9½ Concept motorcycle was created in 2005 and features a four-stroke, 87 degrees V longitudinal twin engine with DOHC and four valves per cylinder. The bike has

The post Moto Morini 9½ Concept (2005) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 9½ Concept motorcycle was created in 2005 and features a four-stroke, 87 degrees V longitudinal twin engine with DOHC and four valves per cylinder. The bike has a capacity of 998cc with a bore x stroke of 107 x 55.5 mm and is liquid-cooled with a compression ratio of 12.0:1. The bike also has a forced trochoidal pump lubrication system and Magneti Marelli indirect electronic injection with a 54mm throttle body. It features I.A.W. electronic ignition and has an electric start.

With a maximum power of 77.5 kW/105 hp at 9000 rpm and maximum torque of 98 Nm/10 kgf-m at 6200 rpm, the bike has a wet, multi-plate anti-hopping system clutch and a six-speed transmission with a final chain drive. The bike’s frame is made of ALS450 steel tubular trellis with varying diameters, and its front suspension includes 50mm Marzocchi upside-down forks with a 150mm/5.9-inch wheel travel. The rear suspension features a single lateral fork with a piggyback tank and adjustable spring preloading, and has the same 150mm/5.9-inch wheel travel.

The Moto Morini 9½ Concept motorcycle has 2x 320mm front disc brakes with four-piston callipers and a single 220mm rear disc brake with a two-piston calliper. The front tyre is a 120/70 ZR17 and the rear tyre is 180/55 ZR17. The bike has a dry weight of 198 kg/435.5 lbs and a fuel capacity of 19 litres/5.0 US gal. It has an average fuel consumption of 18.6 km per litre and can reach a standing 1/4 mile of 11.7 seconds at a speed of 209.5 km/h, and a standing 1000m time of 22.5 seconds at a speed of 209.1 km/h. The top speed of the bike is 238.0 km/h.

Technical specifications:

Make Model: Moto Morini 91/2 Concept

Year: 2005
Engine: Four stroke, 87 degrees V longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 998
Bore x Stroke: 107 x 55.5 mm
Cooling System: Liquid cooled
Compression Ratio: 12.0:1
Lubrication: Forced with trochoidal pump
Induction: Magneti Marelli indirect electronic injection with 54 mm throttle body
Ignition: I.A.W. electronic
Starting: Electric
Max Power: 77,5 kW / 105 hp @ 9000 rpm
Max Torque: 98 Nm / 10 kgf-m @ 6200 rpm
Clutch: Wet, multi-plate, anti-hopping system
Transmission: 6 Speed
Final Drive: Chain
Frame: ALS450 steel tubular trellis with varying diameters
Front Suspension: 50mm Marzocchi upside down forks
Front Wheel Travel: 150 mm / 5.9 in
Rear Suspension: Single lateral fork with piggy back tank and adjustable spring preloading
Rear Wheel Travel: 150 mm / 5.9 in
Front Brakes: 2x 320mm discs 4 piston callipers
Rear Brakes: Single 220mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 180/55 ZR17
Dry Weight: 198 kg/ 435.5 lbs
Fuel Capacity: 19 Litres / 5.0 US gal
Consumption Average: 18.6 km/lit
Standing 1/4 Mile: 11.7 sec / 209.5 km/h
Standing 1000 m: 22.5 sec / 209.1 km/h
Top Speed: 238.0 km/h

The post Moto Morini 9½ Concept (2005) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini New York 350 (1989) https://motorcyclespecifications.com/moto-morini-new-york-350-1989-specs/ Wed, 29 Mar 2023 12:24:05 +0000 https://motorcyclespecifications.com/?p=36312 The Moto Morini New York 350 Custom is a 1989 motorcycle that features a four-stroke, 72-degree V-twin engine with a belt-driven single cam operating pushrod, two valves per cylinder, and

The post Moto Morini New York 350 (1989) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini New York 350 Custom is a 1989 motorcycle that features a four-stroke, 72-degree V-twin engine with a belt-driven single cam operating pushrod, two valves per cylinder, and a capacity of 344cc. Its air-cooled system and compression ratio of 11.0:1 are complemented by induction via 2x Dell’Orto VHBZ 25BS carburetors and Kokusan electronic ignition. The bike’s six-speed transmission delivers a maximum power of 35 hp at 8000 rpm and a maximum torque of 25.7 Nm at 7000 rpm. The motorcycle has a wet weight of 181 kg and a fuel capacity of 17 litres. Front suspension is a telescopic fork, while the rear suspension is twin shock with adjustable damping, and the front and rear brakes feature single 260mm and 240mm discs, respectively. Its front tyre size is 100/90-19, while the rear tyre size is 3.50-18. The Moto Morini New York 350 is a classic motorcycle with distinctive features like the 72-degree V-twin engine, making it a popular choice among avid bikers looking for a blend of performance and style.

Technical specifications:

Make Model: Moto Morini New York 350 Custom

Year: 1989
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 344 cc / 20.9 cu-in
Bore x Stroke: 62 x 57mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 2x Dell’Orto VHBZ 25BS carburetor
Ignition: kokusan electronic
Starting: Electric
Max Power: 35 hp / 25 kW @ 8000 rpm
Max Torque: 25.7 Nm / 19 lb-ft @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic fork
Rear Suspension: Twin shock with adjustable damping
Front Brakes: Single 260mm disc
Rear Brakes: Single 240mm disc
Front Tyre: 100/90-19
Rear Tyre: 3.50-18
Wet Weight: 181 kg / 399 lbs
Fuel Capacity: 17 Litres / 4.5 US gal

The post Moto Morini New York 350 (1989) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini Granpasso 1200 (2008-09) https://motorcyclespecifications.com/moto-morini-granpasso-1200-2008-09-specs-2/ Wed, 29 Mar 2023 11:48:01 +0000 https://motorcyclespecifications.com/?p=36280 The Moto Morini Granpasso 1200 is a motorcycle produced between 2008-09. It has a four-stroke engine with a capacity of 1187cc, offering 117 horsepower at 8500rpm and 102 Nm of

The post Moto Morini Granpasso 1200 (2008-09) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini Granpasso 1200 is a motorcycle produced between 2008-09. It has a four-stroke engine with a capacity of 1187cc, offering 117 horsepower at 8500rpm and 102 Nm of torque at 6750rpm. It has a six-speed transmission and a chain final drive. The trellis frame is made of high-strength steel, and the suspension includes a Marzocchi upside-down fork and an Ohlins single shock absorber. The bike has two 298mm front discs with 2-piston calipers and a single 255mm rear disc with a 2-piston caliper for braking. It rides on 110/80 ZR 19 front and 180/55 ZR 17 rear tires. The fuel capacity is 27 liters, and the bike weighs 210 kg. Overall, the Granpasso 1200 is a powerful and robust bike that can handle rough terrain with ease.

Technical specifications:

Make Model: Moto Morini Granpasso 1200

Year: 2008 – 09
Engine: Four stroke, 87 degreesV longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.4 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5:1
Exhaust: Silencer, 3-way catalytic converter with oxygen sensor
Induction: Magneti Marelli fuel injection 54 mm throttle body
Ignition: I.A.W electronic
Starting: Electric
Max Power: 86 kW / 117 hp @ 8500 rpm
Max Torque: 102 Nm / 10.4 kgf-m @ 6750 rpm
Clutch: Multiplate clutch in oil bath with antis kipping and radial master cylinder.
Transmission: 6 Speed
Final Drive: Chain
Gear Ratio: 1st 13/36 / 2nd 17/32 / 3rd 20/30 / 4th 22/28 / 5th 23/26 / 6th 24/25
Frame: Verlicchi high strength steel tubular trellis frame
Front Suspension: Marzocchi upside down with 50mm stems
Front Wheel Travel: 190 mm / 7.5 in
Rear Suspension: ~Ahlins single shock, with separate tank, preload , rebound and compression adjustable
Rear Wheel Travel: 200 mm / 7.9 in
Front Brakes: 2x 298mm discs 2 piston callipers
Rear Brakes: Single 255mm disc 2 piston caliper
Front Tyre: 110/80 ZR 19
Rear Tyre: 180/55 ZR 17
Rake: 26.5 degrees
Trail: 110 mm / 4.3 in
Dimensions: Height 875 mm / 34.4 in length 2170 mm / 85.4 in Width 850 mm / 33.5 in
Wheelbase: 1505 mm / 59.3 in
Ground Clearance: 200 mm / 7.9 in
Seat Height: 875 mm / 34,4 in
Dry Weight: 210 Kg / 463 lbs
Fuel Capacity: 27 Litres / 7,1 US gal
Reserve: 5.50 litres / 1.45 gal

The post Moto Morini Granpasso 1200 (2008-09) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini Corsaro 1200 Special Edition (2009) https://motorcyclespecifications.com/moto-morini-corsaro-1200-special-edition-2009-specs/ Tue, 28 Mar 2023 23:40:00 +0000 https://motorcyclespecifications.com/?p=35605 The 2009 Moto Morini Corsaro 1200 Special Edition is a four stroke, 1187cc motorcycle with a 87 degree V longitudinal twin engine and liquid cooling system. It has a maximum

The post Moto Morini Corsaro 1200 Special Edition (2009) appeared first on MotorcycleSpecifications.com.

]]> The 2009 Moto Morini Corsaro 1200 Special Edition is a four stroke, 1187cc motorcycle with a 87 degree V longitudinal twin engine and liquid cooling system. It has a maximum power of 140 hp/103 kW at 8500 rpm and a maximum torque of 123 Nm/90.7 lb-ft at 6500 rpm. The bike has a six speed transmission and chain final drive, with Brembo rims and light alloy wheels. The suspension system consists of a Marzocchi upside down with 50mm stems in the front and a single Sachs shock absorber in the rear. The bike has a 24.5 degree rake and 103 mm/4.1 in trail, with dimensions of 2070 mm/81.5 in in length, 810 mm/31.9 in in width, and a wheelbase of 1440 mm/56.7 in. The bike has a dry weight of 196.0 kg/432.1 lbs and a fuel capacity of 18 liters/4.7 US gal. It has a standing 1000m time of 21.3 sec/225.8 km/h, a standing 1/4 mile time of 11.3 sec/199.9 km/h, and a top speed of 233.8 km/h. The bike comes with a sport Termignoni exhaust, 3-way catalytic converter, oxygen sensor, and Magneti Marelli fuel injection system. The frame is made of ALS450 steel tubular trellis with varying diameters. The bike has a wet, multi-plate, anti-hopping system clutch and a ground clearance of 140 mm/4.5 in. The seat height is 830 mm/32.7 in.

Technical specifications:

Make Model: Moto Morini Corsaro 1200 Special Edition

Year: 2009
Engine: Four stroke, 87 degrees V longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.5 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 11.8;1
Lubrication: Forced with trochoidal pump
Exhaust: Sport Termignoni with double silencer, 3-way catalytic converter and oxygen sensor. Euro 3.
Induction: Magneti Marelli fuel injection 54 mm throttle body
Ignition: I.A.W. electronic
Starting: Electric
Max Power: 140 hp / 103 kW @ 8500 rpm
Max Torque: 123 Nm / 90.7 lb-ft @ 6500 rpm
Clutch: Wet, multi-plate, anti-hopping system
Transmission: 6 Speed
Final Drive: Chain
Frame: ALS450 steel tubular trellis with varying diameters
Front Suspension: Marzocchi upside down with 50mm stems, hydraulically adjustable in extension, compression and spring pre-charge on each stem. Ergal rod, floating bushing and stretched counter-spring
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: With progressive motion and single Sachs shock absorber adjustable in extension, compression and spring pre-charge with singlering-nut. Enhanced piston and stretched counter-spring, 130mm wheel travel
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 2 piston caliper
Wheels: Brembo rims in light alloy, 6 spokes
Front Tyre: 120/70 ZR 17
Rear Tyre: 180/55 ZR 17
Rake: 24.5 degrees
Trail: 103 mm / 4.1 in
Dimensions: Length 2070 mm / 81.5 in Width 810 mm / 31.9 in
Wheelbase: 1440 mm / 56.7 in
Seat Height: 830 mm / 32.7 in
Ground Clearance: 140 mm / 4.5 in
Dry Weight: 196.0 kg / 432.1 lbs
Fuel Capacity: 18 Litres / 4.7 US gal
Standing 1000 m: 21.3 sec / 225.8 km/h
Standing 1/4 Mile: 11.3 sec / 199.9 km/h
Top Speed: 233.8 km/h

The post Moto Morini Corsaro 1200 Special Edition (2009) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 350 K2 (1984) https://motorcyclespecifications.com/moto-morini-350-k2-1984-specs/ Tue, 28 Mar 2023 23:35:58 +0000 https://motorcyclespecifications.com/?p=35601 The Moto Morini 350 K2 motorcycle was produced in 1984 and features a four-stroke, 72-degree V-twin engine with a capacity of 344cc. Its compression ratio is 11.0:1 and it uses

The post Moto Morini 350 K2 (1984) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 350 K2 motorcycle was produced in 1984 and features a four-stroke, 72-degree V-twin engine with a capacity of 344cc. Its compression ratio is 11.0:1 and it uses two Dell’Orto VHBZ 25BS carburetors as well as kokusan electronic ignition. The motorcycle has a maximum power output of 35hp at 8000 rpm and a maximum torque of 25.7 Nm at 7000 rpm. The six-speed transmission drives a chain final drive. The front suspension is 35mm Marzocchi forks with 150mm travel and the rear suspension is Marzocchi shocks with 150mm wheel travel. The front brakes are a single 230mm disc and the rear brakes are a single 136mm disc. The motorcycle has a dry weight of 150 kg and a wet weight of 160 kg with a fuel capacity of 15 liters. Its average fuel consumption is 57 mpg and it has a top speed of 201 km/h. It can reach a standing 1/4 mile in 15.36 seconds at 135.3 km/h.

Technical specifications:

Make Model: Moto Morini 350 K2

Year: 1984
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 344 cc / 20.9 cu-in
Bore x Stroke: 62 x 57mm
Cooling System: Air cooled
Compression Ratio: 11.0:1
Induction: 2x Dell’Orto VHBZ 25BS carburetor
Ignition: kokusan electronic
Starting: Electric
Max Power: 35 hp / 25 kW @ 8000 rpm
Max Torque: 25.7 Nm / 19 lb-ft @ 7000 rpm
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 35mm Marzocchi forks 150mm travel
Rear Suspension: Marzocchi shocks 150mm wheel travel
Front Brakes: Single 230mm disc
Rear Brakes: Single 136mm disc
Front Tyre: 110/ 80 V16
Rear Tyre: 130/70 V17
Dry Weight: 150 kg / 330 lbs
Wet Weight: 160 kg / 352.7 lbs
Fuel Capacity: 15 Litres / 3.9 US gal
Consumption Average: 57 mpg
Standing 1/4 Mile: 15.36 sec / 135.3 km/h
Top Speed: 201 km/h

The post Moto Morini 350 K2 (1984) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 501 X2 AMEX (1989) https://motorcyclespecifications.com/moto-morini-501-x2-amex-1989-specs/ Tue, 28 Mar 2023 11:12:07 +0000 https://motorcyclespecifications.com/?p=34905 The Moto Morini 501 X2 AMEX is a motorcycle model from 1989 that has a four stroke V twin engine with a capacity of 507cc. The engine is belt driven

The post Moto Morini 501 X2 AMEX (1989) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 501 X2 AMEX is a motorcycle model from 1989 that has a four stroke V twin engine with a capacity of 507cc. The engine is belt driven and has a single cam operating pushrod 2 valve per cylinder. The cooling system is air cooled with a compression ratio of 11.5:1, and the ignition is electronic with an electric starter. The maximum power output is 42 hp at 8500 rpm. The clutch is wet and cable operated, and the transmission is a 6 speed with a final drive chain. The suspension consists of telescopic forks in the front and an alloy swinging arm with single shocks in the rear. The front and rear brakes are single discs with 260mm and 230mm diameter, respectively. The front and rear tires are 3.00-21 and 4.00-18, respectively. The wet weight of the motorcycle is 154.0 kg or 339.5 lbs, and the fuel capacity is 14 liters or 3.7 US gallons.

Technical specifications:

Make Model: Moto Morini 501 X2 AMEX

Year: 1989
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 507 cc / 30.9 cu-in
Bore x Stroke: 71 x 64 mm
Cooling System: Air cooled
Compression Ratio: 11.5:1
Induction: 2x Dell’Orto carburetor
Ignition: Electronic
Starting: Electric
Max Power: 42 hp / 31 kW @ 8500 rpm
Clutch: Wet, cable operated
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Alloy swinging arm single shocks
Front Brakes: Single 260mm disc
Rear Brakes: Single 230mm disc
Front Tyre: 3.00-21
Rear Tyre: 4.00-18
Wet weight: 154.0 kg / 339.5 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Moto Morini 501 X2 AMEX (1989) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 400S (1982) https://motorcyclespecifications.com/moto-morini-400s-1982-specs/ Mon, 27 Mar 2023 17:58:03 +0000 https://motorcyclespecifications.com/?p=33926 The Moto Morini 400S is a 1982 motorcycle with a four-stroke, 72-degree V twin engine that has a capacity of 396cc. Its compression ratio is 11.0:1 and it is air-cooled.

The post Moto Morini 400S (1982) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 400S is a 1982 motorcycle with a four-stroke, 72-degree V twin engine that has a capacity of 396cc. Its compression ratio is 11.0:1 and it is air-cooled. The bike has a carburetor induction and an electronic ignition from kokusan. It has a six-speed transmission and a chain final drive. The front suspension has 35mm Marzocchi forks with 150mm travel and the rear suspension has Marzocchi shocks with 150mm wheel travel. The front brake is a single 230mm disc and the rear is a single 136mm disc. The bike has a 100/90-18 front tire and a 3.50-18 rear tire. It weighs 156 kg (343.9 lbs) when wet and has a fuel capacity of 15 litres (3.9 US gal). The Moto Morini 400S is a powerful and reliable motorcycle with a classic design that remains popular among riders.

Technical specifications:

Make Model: Moto Morini 400 S

Year: 1982 –
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 396 cc / 24.1 cu-in
Bore x Stroke: 66.5 x 57mm
Compression Ratio: 11.0:1
Cooling System: Air cooled
Induction: Carburetor
Ignition: kokusan electronic
Starting: Electric
Max Power:
Max Torque:
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 35mm Marzocchi forks 150mm travel
Rear Suspension: Marzocchi shocks 150mm wheel travel
Front Brakes: Single 230mm disc
Rear Brakes: Single 136mm disc
Front Tyre: 100/90-18
Rear Tyre: 3.50 – 18
Wet Weight: 156 kg / 343.9 lbs
Fuel Capacity: 15 Litres / 3.9 US gal

The post Moto Morini 400S (1982) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini Granpasso 1200 (2013) https://motorcyclespecifications.com/moto-morini-granpasso-1200-2013-specs/ Mon, 27 Mar 2023 17:27:56 +0000 https://motorcyclespecifications.com/?p=33898 The Moto Morini Granpasso 1200 (2013) motorcycle is a limited edition scrambler model in military green. It is powered by a liquid-cooled, 1187cc V twin engine with DOHC and 4

The post Moto Morini Granpasso 1200 (2013) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini Granpasso 1200 (2013) motorcycle is a limited edition scrambler model in military green. It is powered by a liquid-cooled, 1187cc V twin engine with DOHC and 4 valves per cylinder. The engine produces a maximum power of 117hp at 8500 rpm and a maximum torque of 102Nm at 6750 rpm. The bike comes with a 6-speed transmission and a chain final drive. It has a high strength steel tubular trellis frame with Marzocchi upside-down front suspension and a single lateral shock with a fully adjustable piggyback tank for rear suspension. The front brakes are 2x 298mm discs with 2-piston calipers while the rear brake is a single 255mm disc with a 2-piston caliper. The front tire is 110/80 ZR 19 and the rear tire is 150/70 ZR 17. The motorcycle weighs 198 kg and has a fuel capacity of 18 liters. It can achieve a top speed of 229.2 km/h and complete a standing quarter-mile in 11.6 seconds.

Technical specifications:

Make Model: Moto Morini Scrambler 1200 Military Green Limited Editon

Year: 2013
Engine: Four stroke, 87 degrees V longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.5 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5:1
Lubrication: Forced with trochoidal pump
Induction: Magneti Marelli fuel injection 54 mm throttle body
Ignition: I.A.W. electronic
Starting: Electric
Max Power: 86 kW / 117 hp @ 8500 rpm
Max Torque: 102 Nm / 10.4 kgf-m @ 6750 rpm
Clutch: Multiplate clutch in oil bath with antis kipping and radial master cylinder.
Transmission: 6 Speed
Final Drive: Chain
Frame: Verlicchi high strength steel tubular trellis frame
Front Suspension: Marzocchi upside down with 50mm stems
Front Wheel Travel: 155 mm / 6.1 in
Rear Suspension: Single lateral shock, fully adjustable piggy back tank
Rear Wheel Travel: 170 mm / 6.7 in
Front Brakes: 2x 298mm discs 2 piston callipers
Rear Brakes: Single 255mm disc 2 piston caliper
Front Tyre: 110/80 ZR 19
Rear Tyre: 150/70 ZR 17
Dimensions: Length 2180 mm / 85.8 in Width 865 mm / 34.1 in
Wheelbase: 1,500 mm / 59.1 in
Seat Height: 840 mm / 33.1 in
Ground Clearance: 162 mm / 6.4 in
Dry Weight: 198 kg / 436 lbs
Fuel Capacity: 18 Litres / 4.7 US gal
Standing 1/4 Mile: 11.6 sec
Top Speed: 229.2 km/h

The post Moto Morini Granpasso 1200 (2013) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini Corsaro 1200 ZZ (2017) https://motorcyclespecifications.com/moto-morini-corsaro-1200-zz-2017-specs/ Mon, 27 Mar 2023 15:43:03 +0000 https://motorcyclespecifications.com/?p=33798 The Moto Morini Corsaro 1200 ZZ is a 2017 motorcycle with a four-stroke, 87-degree V longitudinal twin engine that has a capacity of 1187cc. The engine is liquid-cooled and has

The post Moto Morini Corsaro 1200 ZZ (2017) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini Corsaro 1200 ZZ is a 2017 motorcycle with a four-stroke, 87-degree V longitudinal twin engine that has a capacity of 1187cc. The engine is liquid-cooled and has a compression ratio of 11.8:1. It comes with a Magneti Marelli fuel injection system and is compliant with the Euro 4 emissions standards. The motorcycle has an electric starting system and is capable of producing a maximum power of 140hp and a maximum torque of 125Nm at 6750rpm. It has a wet, multi-plate clutch and a six-speed transmission with a chain final drive. The frame is made of steel and has a trellis design. The front suspension is a 46mm Upsidedown telescopic fork and the rear suspension is a single shock with prolink to the swingarm. The motorcycle has dual 320mm front disc brakes and a single 220mm rear disc brake with a BOSCH MP9.1 ABS system on both wheels. The wheels are Brembo rims in light alloy with a 6-spoke design. The front tire is a 120/70 ZR 17 Pirelli Diablo Rosso III and the rear tire is a 190/55 ZR 17 Pirelli Diablo Rosso III. The motorcycle has a rake of 24.8 degrees, a trail of 103mm, and a steering angle of 34 degrees. It has a length of 2070mm, a width of 810mm, and a wheelbase of 1450mm. The seat height is 860mm and the ground clearance is 150mm. The dry weight of the motorcycle is 192kg and it has a fuel capacity that is not specified.

Technical specifications:

Make Model: Moto Morini Corsaro 1200 ZZ

Year: 2017
Engine: Four stroke, 87 degrees V longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.5 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 11.8:1
Lubrication: Forced with trochoidal pump
Exhaust: Sport Termignoni with double silencer, 3-way catalytic converter and oxygen sensor. Euro 3.
Induction: Magneti Marelli fuel injection 54 mm throttle body
Engine management: ECU by Athena, developed for Moto Morini application
Emissions: Compliant with the 168/2013 directive (Euro 4)
Starting: Electric
Max Power: 140 hp / 103 kW @ 8500 rpm
Max Torque: 125 Nm / 92.1 lb-ft @ 6750 rpm
Clutch: Wet, multi-plate, anti-hopping system
Transmission: 6 Speed
Final Drive: Chain
Frame: Steel 25CrMo4 trellis, welded with TIG technology
Front Suspension: 46 mm Upsidedown telescopic fork fully adjustable as per preload, damping in compression and rebound, exclusively produced for Moto Morini by MUPO Race Suspension
Front Wheel Travel: 135 mm / 5.3 in
Rear Suspension: Single shock with prolink to swingarm, fully adjustable in preload (hydraulic remote command), height, rebound damping, exclusively produced for Moto Morini by MUPO Race Suspension
Rear Wheel Travel: 135 mm / 5.3 in
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 2 piston caliper
ABS: BOSCH MP9.1 system on both wheels, removable by rider handlebar command
Wheels: Brembo rims in light alloy, 6 spokes
Front Rim: 3,50 x17 aluminium forged rim (3,50 x17 tubeless spoked rim as alternative)
Rear Rim: 6,00 x17 aluminium forged rim (5,50 x17 tubeless spoked rim as alternative)
Front Tyre: 120/70 ZR 17 Pirelli Diablo Rosso III
Rear Tyre: 190/55 ZR 17 Pirelli Diablo Rosso III ( 180/55-17 as alternative on spoked rims)
Rake: 24.8 degrees
Trail: 103 mm / 4.1 in
Steering Angle: 34 degrees
Dimensions: Length 2070 mm / 81.5 in Width 810 mm / 31.9 in
Wheelbase: 1450 mm / 57.0 in
Seat Height: 860 mm / 33.8 in
Ground Clearance: 150 mm / 5.9 in
Dry Weight: 192 kg / 423 lbs
Fuel Capacity:

The post Moto Morini Corsaro 1200 ZZ (2017) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini Granpasso 1200 (2010) https://motorcyclespecifications.com/moto-morini-granpasso-1200-2010-specs/ Mon, 27 Mar 2023 11:58:03 +0000 https://motorcyclespecifications.com/?p=33586 The Moto Morini Granpasso 1200 (2010) is a motorcycle with a four-stroke, 87 degree V longitudinal twin engine that has a capacity of 1187 cc. It has liquid cooling, a

The post Moto Morini Granpasso 1200 (2010) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini Granpasso 1200 (2010) is a motorcycle with a four-stroke, 87 degree V longitudinal twin engine that has a capacity of 1187 cc. It has liquid cooling, a compression ratio of 12.5:1, and a forced lubrication system with a trochoidal pump. It features Magneti Marelli fuel injection with a 54mm throttle body and electronic ignition. The Clutch is a multiplate clutch in oil bath with antis kipping and radial master cylinder. The transmission is a 6 speed with a chain final drive. The frame is Verlicchi high strength steel tubular trellis frame. The front suspension is Marzocchi upside down with 50mm stems and 190mm wheel travel, while the rear suspension is an Ohlins single shock, with separate tank, preload, rebound, and compression adjustable with 200mm wheel travel. The front brakes are twin 298mm discs with two-piston calipers, and the rear brakes are a single 255mm disc with a two-piston caliper. The bike has a length of 2,170 mm, a seat height of 830 mm, and a ground clearance of 200 mm. It has a dry weight of 210.0 kg and a fuel capacity of 27 liters. The Granpasso 1200 has a maximum power of 86 kW at 8,500 rpm and a maximum torque of 102 Nm at 6,750 rpm. The bike has a top speed of 218.9 km/h and an average fuel consumption of 18.1 km/lit.

Technical specifications:

Make Model: Moto Morini Granpasso H83 Travel Kit

Year: 2010 –
Engine: Four stroke, 87 degrees V longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.5 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5:1
Lubrication: Forced with trochoidal pump
Induction: Magneti Marelli fuel injection 54 mm throttle body
Ignition: I.A.W. electronic
Starting: Electric
Max Power: 86 kW / 117 hp @ 8500 rpm
Max Torque: 102 Nm / 10.4 kgf-m @ 6750 rpm
Clutch: Multiplate clutch in oil bath with antis kipping and radial master cylinder.
Transmission: 6 Speed
Final Drive: Chain
Frame: Verlicchi high strength steel tubular trellis frame
Front Suspension: Marzocchi upside down with 50mm stems, 190mm wheel travel.
Rear Suspension: ~Ahlins single shock, with separate tank, preload , rebound and compression adjustable, 200mm wheel travel
Front Brakes: 2x 298mm discs 2 piston callipers
Rear Brakes: Single 255mm disc 2 piston caliper
Front Tyre: 110/80 ZR 19
Rear Tyre: 180/55 ZR 17
Dimensions: Length 2,170 mm / 85.4 in
Seat Height: 830 mm / 32.7 in
Ground Clearance: 200 mm / 7.9 in
Dry Weight: 210.0 kg / 463 lbs
Fuel Capacity: 27 Litres / 7.1 US gal
Consumption average: 18.1 km/lit
Standing 1/4 Mile: 12.1 sec
Top Speed: 218.9 km/h
Consumption Average: 18.1 km/lit
Standing 1/4 Mile: 12.1 sec
Top Speed: 218.9 km/h

The post Moto Morini Granpasso 1200 (2010) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini Corsaro 1200 Veloce (2010) https://motorcyclespecifications.com/moto-morini-corsaro-1200-veloce-2010-specs/ Mon, 27 Mar 2023 04:16:01 +0000 https://motorcyclespecifications.com/?p=33148 The Moto Morini Corsaro 1200 Veloce is a 2010 motorcycle with a four-stroke, 87-degree V longitudinal twin, DOHC engine with a capacity of 1187cc. It has liquid cooling and a

The post Moto Morini Corsaro 1200 Veloce (2010) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini Corsaro 1200 Veloce is a 2010 motorcycle with a four-stroke, 87-degree V longitudinal twin, DOHC engine with a capacity of 1187cc. It has liquid cooling and a compression ratio of 11.8:1. With a Magneti Marelli fuel injection system and I.A.W. electronic ignition, it produces a maximum power of 140hp at 8500rpm and a maximum torque of 123 Nm at 6500rpm. The bike has a wet, multi-plate, anti-hopping system clutch and a six-speed transmission. The frame is made of ALS450 steel and has a tubular trellis design with varying diameters. The Marzocchi upside-down front suspension is adjustable in extension, compression and spring pre-charge, while the rear suspension is a single Sachs shock absorber. Both the front and rear brakes are Brembo, with the front being a dual setup on 320mm discs and the rear being a single setup on a 220mm disc. The bike weighs 196kg and has a fuel capacity of 18 litres. It can reach a top speed of 246 km/h, and its average consumption is 17.1 km/lit.

Technical specifications:

Make Model: Moto Morini Corsaro 1200 Veloce

Year: 2010 –
Engine: Four stroke, 87 degrees V longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.5 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 11.8;1
Lubrication: Forced with trochoidal pump
Exhaust: Sport Termignoni with double silencer, 3-way catalytic converter and oxygen sensor. Euro 3.
Induction: Magneti Marelli fuel injection 54 mm throttle body
Ignition: I.A.W. electronic
Starting: Electric
Max Power: 140 hp / 103 kW @ 8500 rpm
Max Torque: 123 Nm / 90.7 lb-ft @ 6500 rpm
Clutch: Wet, multi-plate, anti-hopping system
Transmission: 6 Speed
Final Drive: Chain
Frame: ALS450 steel tubular trellis with varying diameters
Front Suspension: Marzocchi upside down with 50mm stems, hydraulically adjustable in extension, compression and spring pre-charge on each stem. Ergal rod, floating bushing and stretched counter-spring
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: With progressive motion and single Sachs shock absorber adjustable in extension, compression and spring pre-charge with singlering-nut. Enhanced piston and stretched counter-spring, 130mm wheel travel
Rear Wheel Travel: 130 mm / 5.1 in
Front Brakes: 2x 320mm discs 4 piston calipers
Rear Brakes: Single 220mm disc 2 piston caliper
Wheels: Brembo rims in light alloy, 6 spokes
Front Tyre: 120/70 ZR 17
Rear Tyre: 180/55 ZR 17
Rake: 24.5 degrees
Trail: 103 mm / 4.1 in
Dimensions: Length 2070 mm / 81.5 in Width 810 mm / 31.9 in
Wheelbase: 1440 mm / 56.7 in
Seat Height: 830 mm / 32.7 in
Ground Clearance: 140 mm / 4.5 in
Dry Weight: 196.0 kg / 432.1 lbs
Fuel Capacity: 18 Litres / 4.7 US gal
Standing 1000 m: 21.3 sec / 225.8 km/h
Consumption Average: 17.1 km/lit
Standing 1/4 Mile: 11.2 sec
Top Speed: 246.2 km/h

The post Moto Morini Corsaro 1200 Veloce (2010) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 400 Dart Sport (1990) https://motorcyclespecifications.com/moto-morini-400-dart-sport-1990-specs/ Sun, 26 Mar 2023 18:05:15 +0000 https://motorcyclespecifications.com/?p=32575 The Moto Morini 400 Dart Sport motorcycle was produced in 1990 with a four-stroke 72-degree V-twin engine. The capacity of the engine is 396cc with a bore x stroke of

The post Moto Morini 400 Dart Sport (1990) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 400 Dart Sport motorcycle was produced in 1990 with a four-stroke 72-degree V-twin engine. The capacity of the engine is 396cc with a bore x stroke of 66.5 x 57mm and a compression ratio of 11.0:1. It is air-cooled and uses a carburetor for induction, with electronic ignition and electric starting. Maximum power and torque are not specified. The six-speed transmission drives the rear wheel via a chain final drive. The front suspension is 35mm Marzocchi forks with 150mm travel, and the rear suspension features Marzocchi shocks with 150mm wheel travel. Braking is handled by a single 230mm disc in the front and a single 136mm disc in the rear. The front and rear tires are respectively 110/80 V16 and 130/70 V17. The dry weight is 170 kg, and the fuel capacity is 14 liters or 3.7 US gallons.

Technical specifications:

Make Model: Moto Morini 400 Dart Sport

Year: 1990
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 396 cc / 24.1 cu-in
Bore x Stroke: 66.5 x 57mm
Compression Ratio: 11.0:1
Cooling System: Air cooled
Induction: Carburetor
Ignition: kokusan electronic
Starting: Electric
Max Power:
Max Torque:
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: 35mm Marzocchi forks 150mm travel
Rear Suspension: Marzocchi shocks 150mm wheel travel
Front Brakes: Single 230mm disc
Rear Brakes: Single 136mm disc
Front Tyre: 110/ 80 V16
Rear Tyre: 130/70 V17
Dry Weight: 170.0 kg / 374.8 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Moto Morini 400 Dart Sport (1990) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini V12M01 supermoto Prototipo (2010) https://motorcyclespecifications.com/moto-morini-v12m01-supermoto-prototipo-2010-specs/ Sun, 26 Mar 2023 07:29:11 +0000 https://motorcyclespecifications.com/?p=31967 The Moto Morini V12M01 supermoto Prototipo was a motorcycle model released in 2010. It featured a four-stroke, 87-degree V longitudinal twin engine with a capacity of 1187cc. The bike had

The post Moto Morini V12M01 supermoto Prototipo (2010) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini V12M01 supermoto Prototipo was a motorcycle model released in 2010. It featured a four-stroke, 87-degree V longitudinal twin engine with a capacity of 1187cc. The bike had a liquid cooling system and a compression ratio of 12.5:1. It had a maximum power output of 117 horsepower at 8500 rpm and a maximum torque of 102 Nm at 6750 rpm. The clutch was a multiplate clutch in oil bath with anti-skip and radial master cylinder, and the transmission was a six-speed system. The bike had a high-strength steel tubular trellis frame and a Marzocchi upside-down fork front suspension and a progressive linkage with Sachs adjustable rear suspension. The front brakes were twin 320mm discs with four-piston calipers, and the rear brakes were a single 220mm disc with two-piston caliper. The bike had a wheelbase of 1500mm, a seat height of 840mm, and a ground clearance of 162mm. The dry weight was 198kg, and the fuel capacity was 18 litres.

Technical specifications:

Make Model: Moto Morini V12M01 supermoto Prototipo

Year: 2010
Engine: Four stroke, 87 degrees V longitudinal twin, DOHC, 4 valves per cylinder
Capacity: 1187 cc / 72.5 cu-in
Bore x Stroke: 107 x 66 mm
Cooling System: Liquid cooled
Compression Ratio: 12.5:1
Lubrication: Forced with trochoidal pump
Induction: Magneti Marelli fuel injection 54 mm throttle body
Ignition: I.A.W. electronic
Starting: Electric
Max Power: 86 kW / 117 hp @ 8500 rpm
Max Torque: 102 Nm / 10.4 kgf-m @ 6750 rpm
Clutch: Multiplate clutch in oil bath with antis kipping and radial master cylinder.
Transmission: 6 Speed
Final Drive: Chain
Frame: Verlicchi high strength steel tubular trellis frame
Front Suspension: Marzocchi upside down with 50mm stems, 152mm wheel travel.
Rear Suspension: Progressive linkage wit Sachs Adjustable in rebound, compression spring loading, 150mm wheel travel
Front Brakes: 2x 320mm discs 4 piston callipers
Rear Brakes: Single 220mm disc 2 piston caliper
Front Tyre: 120/70 ZR 17
Rear Tyre: 180/55 ZR 17
Wheelbase: 1,500 mm / 59.1 in
Seat Height: 840 mm / 33.1 in
Ground Clearance: 162 mm / 6.4 in
Dry Weight: 198 kg / 436 lbs
Fuel Capacity: 18 Litres / 4.7 US gal

The post Moto Morini V12M01 supermoto Prototipo (2010) appeared first on MotorcycleSpecifications.com.

]]> Moto Morini 501 XE Camel (1985) https://motorcyclespecifications.com/moto-morini-501-xe-camel-1985-specs/ Sat, 25 Mar 2023 22:52:08 +0000 https://motorcyclespecifications.com/?p=31477 The Moto Morini 501 XE Camel is a motorcycle model that was released in 1985. It features a four-stroke, 72-degree V-twin engine with a capacity of 507cc and 2 valves

The post Moto Morini 501 XE Camel (1985) appeared first on MotorcycleSpecifications.com.

]]> The Moto Morini 501 XE Camel is a motorcycle model that was released in 1985. It features a four-stroke, 72-degree V-twin engine with a capacity of 507cc and 2 valves per cylinder. The engine has a compression ratio of 11.5:1 and is cooled by air. The motorcycle has a maximum power output of 42 hp/31 kW at 8500 rpm and is equipped with electronic ignition and a 6-speed transmission. The bike has a wet weight of 154.0 kg/339.5 lbs and a fuel capacity of 14 litres/3.7 US gal. The front suspension consists of telescopic forks while the rear suspension is an alloy swinging arm with single shocks. Both the front and rear brakes are single-disc, 260mm and 230mm respectively. The front and rear tyres are 3.00-21 and 4.00-18 respectively.

Technical specifications:

Make Model: Moto Morini 501 XE Camel

Year: 1985
Engine: Four stroke, 72 degrees V Twin, belt driven single cam operating pushrod 2 valve per cylinder
Capacity: 507 cc / 30.9 cu-in
Bore x Stroke: 71 x 64 mm
Cooling System: Air cooled
Compression Ratio: 11.5:1
Induction: 2x Dell’Orto carburetor
Ignition: Electronic
Starting: Electric
Max Power: 42 hp / 31 kW @ 8500 rpm
Clutch: Wet, cable operated
Transmission: 6 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Alloy swinging arm single shocks
Front Brakes: Single 260mm disc
Rear Brakes: Single 230mm disc
Front Tyre: 3.00-21
Rear Tyre: 4.00-18
Wet weight: 154.0 kg / 339.5 lbs
Fuel Capacity: 14 Litres / 3.7 US gal

The post Moto Morini 501 XE Camel (1985) appeared first on MotorcycleSpecifications.com.

]]>