Junak Archives - MotorcycleSpecifications.com https://motorcyclespecifications.com/category/junak/ Find your motorcycle specifications Fri, 07 Apr 2023 22:56:47 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 Roehr eSuperBike / RR (2009) https://motorcyclespecifications.com/roehr-esuperbike-rr-2009-specs/ Fri, 07 Apr 2023 19:12:27 +0000 https://motorcyclespecifications.com/?p=32232 The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4 valve per cylinder supercharged engine that can produce up to 180 hp at 9000 rpm

The post Roehr eSuperBike / RR (2009) appeared first on MotorcycleSpecifications.com.

]]> The Roehr eSuperBike/RR (2009) is a four-stroke, liquid-cooled motorcycle with a 60-degree V-twin, DOHC, 4 valve per cylinder supercharged engine that can produce up to 180 hp at 9000 rpm and 115 lb-ft at 7600 rpm. The motorcycle has a wet, multi-plate, hydraulic actuation clutch, a 5-speed transmission, and a chain final drive. Its frame is made of CrMo steel/aluminum beam, and it features ~Ahlins fully adjustable upside-down fork with TiN front suspension and ~Ahlins fully adjustable linkless monoshock rear suspension. The front brakes of the motorcycle have 2 x 320mm discs with 4 piston calipers, while the rear brakes have a single 230mm disc with 2 piston calipers. The Roehr eSuperBike/RR has a seat height of 800 mm / 31.4 in, a dry weight of 193 kg / 425 lbs, and a fuel capacity of 14.4 Litres / 3.8 US gal.

Technical specifications:

Make Model: Roehr 1260

Year: 2009-
Engine: Four stroke, 60 degrees V-twin, DOHC, 4 valve per cylinder. Supercharged
Capacity: 1250 cc / 76.2 cu-in
Bore x Stroke: 105 X 72mm
Cooling System: Liquid cooled
Compression Ratio: 11.3:1
Induction:
Starting: Electric
Max Power: 180 hp @ 9000 rpm
Max Torque: 115 lb-ft @ 7600 rpm
Clutch: Wet, multi-plate, hydraulic actuation
Transmission: 5 Speed
Final Drive: Chain
Frame: CrMo steel/aluminum beam
Front Suspension: ~Ahlins 43mm fully adjustable upside-down fork with TiN
Rear Suspension: ~Ahlins fully adjustable link less monoshock
Front Brakes: 2 x 320mm discs 4 piston calipers
Rear Brakes: Single 230mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 190/55 ZR17
Seat Height: 800 mm / 31.4 IN
Dry Weight: 193 kg / 425 LBS
Fuel Capacity: 14.4 Litres / 3.8 US gal

The post Roehr eSuperBike / RR (2009) appeared first on MotorcycleSpecifications.com.

]]> Rider Auto (1982) https://motorcyclespecifications.com/rider-auto-1982-specs-7/ Mon, 03 Apr 2023 23:19:05 +0000 https://motorcyclespecifications.com/?p=43591 The Rider Auto Glide Old School motorcycle was manufactured in 1982 and has a four-stroke, 90-degree V-twin engine with a capacity of 44 ci/738 cc. The engine is air-cooled and

The post Rider Auto (1982) appeared first on MotorcycleSpecifications.com.

]]> The Rider Auto Glide Old School motorcycle was manufactured in 1982 and has a four-stroke, 90-degree V-twin engine with a capacity of 44 ci/738 cc. The engine is air-cooled and has a compression ratio of 8.5:1. The bike features an automatic CVT Type II transmission with belt final drive, and an electric starter. The exhaust has two stages and is muffled and baffled. The front brake is a single disc four-piston caliper, while the rear brake is a single disc one-piston caliper. The front tire is 21 inches with 60 spokes, while the rear tire is 16 inches with 60 spokes. The seat height is 24.5 inches, and the dry weight of the bike is 460 lbs. The fuel capacity is 4.2 gallons or 15.9 liters.

Technical specifications:

Make Model: Rider Auto Glide Old School

Engine: Four stroke, 90 degrees V-Twin, 2 valve per cylinder
Capacity: 44 ci / 738 cc
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Induction:
Starting: Electric
Exhaust: 2 Stage: Muffled, Baffled
Transmission: Automatic CVT Type II
Final Drive: Belt
Front Brakes: Single disc 4 piston caliper
Rear Brakes: Single disc 1 piston caliper
Front Tyre: 21″/53.3cm | 60 Spoke
Rear Tyre: 16″/40.6cm | 60 Spoke
Seat Height: 24.5 in / 622 mm
Dry Weight: 460 lbs. / 209 kg
Fuel Capacity: 4.2 gal / 15.9 Litres

The post Rider Auto (1982) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Bullet 350 (2009-10) https://motorcyclespecifications.com/royal-enfield-bullet-350-2009-10-specs-3/ Mon, 03 Apr 2023 01:18:00 +0000 https://motorcyclespecifications.com/?p=42371 The Royal Enfield Bullet Classic 500 was produced from 2009 to 2010 and features a four stroke, single cylinder, OHV engine with a capacity of 499cc. The engine is air

The post Royal Enfield Bullet 350 (2009-10) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Bullet Classic 500 was produced from 2009 to 2010 and features a four stroke, single cylinder, OHV engine with a capacity of 499cc. The engine is air cooled and has a compression ratio of 8.5:1, with electronic fuel injection (EFI) induction and electronic ignition Keihin. It has a 12V electrical system and can be kick-started or electrically started. The motorcycle has a wet, multiplate clutch and a 5-speed constant mesh transmission. The final drive is a chain. The frame is a single downtube, with the engine serving as a stress member. The front suspension is telescopic with hydraulic damping and has 130mm of wheel travel, while the rear suspension has twin shocks that are gas charged with 5-step adjustable preload and 80mm of wheel travel. The front brakes are a single 280mm disc with a two piston caliper, while the rear brakes are drum brakes with a 152mm single leading shoe internal expanding mechanism. The wheels are alloy with laced wire spokes, and the front and rear rims have dimensions of 3.25×19 and 3.50×19, respectively. The motorcycle has a length of 2180mm, a width of 800mm, and a height of 1080mm. The wheelbase is 1370mm, and the ground clearance is 135mm. The seat height is 800mm, and the wet weight is 187kg. Finally, the fuel capacity is 14.5 litres.

Technical specifications:

Make Model: Royal Enfield Bullet Classic 500

Year: 2009 – 10
Engine: Four Stroke, single Cylinder, OHV
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Engine Oil: 15W50 API, SL grade, JASO MA
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Exhaust: One-into-one
Ignition: Electronic Ignition Keihin
Starting: Electric & Kick
Max Power: 20.3 kW / 27.2 hp @ 5200 rpm
Max Torque: 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft @ 4000 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Frame: Single downtube, engine used as stress member
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Twin shocks, gas charged with 5-step adjustable preload
Rear Wheel Travel: 80 mm / 3.1 in
Front Brakes: Single 280mm disc, 2 piston caliper
Rear Brakes: Drum, 152 mm, single leading shoe internal expanding
Wheels: Alloy, laced wire spokes
Front Rim: 3.25 x 19
Rear Rim: 3.50 x 19
Front Tyre: 90/90-19
Dimensions: Length: 2180 mm / 85.8 in Width: 800 mm / 31.5 in Height: 1080 mm / 42.5 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 135 mm / 5.3 in
Seat Height: 800 mm / 31.5 in
Wet Weight: 187 kg / 412 lbs
Fuel Capacity: 14.5 Litres / 3.8 US gal

The post Royal Enfield Bullet 350 (2009-10) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Bullet 350 (1965) https://motorcyclespecifications.com/royal-enfield-bullet-350-1965-specs/ Sun, 02 Apr 2023 21:59:04 +0000 https://motorcyclespecifications.com/?p=42197 The Royal Enfield Bullet 350 motorcycle from 1965 uses a four-stroke, single cylinder, OHV, SI engine with a capacity of 346cc and a bore and stroke of 70 x 90mm.

The post Royal Enfield Bullet 350 (1965) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Bullet 350 motorcycle from 1965 uses a four-stroke, single cylinder, OHV, SI engine with a capacity of 346cc and a bore and stroke of 70 x 90mm. It is air-cooled with a compression ratio of 6.5:1 and uses an Amal Monobloc induction with a breaker and coil ignition system. Starting is kick-start only, and it has a maximum power of 21hp at 5250rpm and maximum torque of 28Nm at 4000rpm. It has a multi-plate, wet clutch and 4-speed transmission with chain final drive. The frame is made of welded steel, and the bike has telescopic fork front suspension and swing arm rear suspension with 2 dampers. The front brakes are twin-lead internal expanding drum brakes, and the rear has a foot-operated, 153mm drum. The tyres are both 3.25-19 size, and its dimensions are length 2140mm, width 800mm, and height 1030mm, with a wheelbase of 1370mm and a seat height of 800mm. The wet weight of the Royal Enfield Bullet 350 is 180kg and it has a fuel capacity of 13.5 litres or 3.5 US gallons.

Technical specifications:

Make Model: Royal Enfield Bullet 350

Year: 1965 –
Engine: Four Stroke, single Cylinder, OHV, SI Engine, Twinspark
Capacity: 346 cc / 21.1 cu-in
Bore x Stroke: 70 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 6.5:1
Induction: Amal Monobloc
Ignition: Breaker & coil
Starting: Kick
Max Power: 21 hp 15.3 kW @ 5250 rpm
Max Torque: 28 Nm / 15.4 lb-ft @ 4000 rpm
Clutch: Multi-plate, wet
Transmission: 4 Speed
Final Drive: Chain
Frame: Welded steel
Front Suspension: Telescopic fork
Rear Suspension: Swing arm w/2 dampers
Front Brakes: Twin lead internal expanding drum breake
Rear Brakes: Foot operated, 153 mm drum
Front Tyre: 3.25 – 19
Rear Tyre: 3.25 – 19
Dimensions: Length 2140 mm / 84.2 in Width 800 mm / 31.5 in Height 1030 mm / 40.5 in
Wheelbase: 1370 mm / 53.9 in
Seat Height: 800 mm / 31.5 in
Wet Weight: 180 kg / 416.6 lbs
Fuel Capacity: 13.5 Litres / 3.5 US gal

The post Royal Enfield Bullet 350 (1965) appeared first on MotorcycleSpecifications.com.

]]> Rickman Predator 1000CR (1982) https://motorcyclespecifications.com/rickman-predator-1000cr-1982-specs/ Sun, 02 Apr 2023 10:07:55 +0000 https://motorcyclespecifications.com/?p=41529 The Rickman Predator 1000CR is a motorcycle produced in 1982 with a four-stroke, transverse four-cylinder, DOHC engine that has 2 valves per cylinder and a capacity of 987. It has

The post Rickman Predator 1000CR (1982) appeared first on MotorcycleSpecifications.com.

]]> The Rickman Predator 1000CR is a motorcycle produced in 1982 with a four-stroke, transverse four-cylinder, DOHC engine that has 2 valves per cylinder and a capacity of 987. It has a compression ratio of 9.2:1, and induction system consisting of four 28mm Mikuni VM 28 SS carbs. The ignition system is electronic, and it starts using electricity. The maximum power output of the Rickman Predator 1000CR is 90 horsepower at 8200 rpm, with a maximum torque of 8.5 kgf-m at 6500 rpm. The transmission has 5 speeds, and the final drive is a chain. The hand-made frame is built using Reynolds 531 nickel-plated material, with Ceriani forks for front suspension and Koni tri-rate rear shocks. The front brakes feature two discs, while the rear brake has one disc. The bike weighs a dry weight and has an unknown fuel capacity.

Technical specifications:

Make Model: Rickman Predator 1000CR

Year: 1982
Engine: Four stroke, transverse four cylinder, DOHC, 2 valves per cylinder.
Capacity: 987
Bore x Stroke: 70 x 64.8 mm
Cooling System: Air cooled
Compression Ratio: 9.2:1
Induction: 4x 28mm Mikuni VM 28 SS carbs.
Ignition: Electronic
Starting: Elctric
Max Power: 90 hp 65.7 @ 8200 rpm
Max Torque: 8.5 kgf-m @ 6500 rpm
Transmission: 5 Speed
Final Drive: Chain
Frame: Reynolds 531 nickel plated hand made frame
Front Suspension: Ceriani forks
Rear Suspension: Koni tri-rate rear shocks
Front Brakes: 2x discs
Rear Brakes: Single disc
Front Tyre:
Rear Tyre:
Dry Weight:
Fuel Capacity:

The post Rickman Predator 1000CR (1982) appeared first on MotorcycleSpecifications.com.

]]> Roehr 1130 (2007) https://motorcyclespecifications.com/roehr-1130-2007-specs/ Sun, 02 Apr 2023 08:07:58 +0000 https://motorcyclespecifications.com/?p=41425 The Roehr 1130 (2007) is a powerful motorcycle with a four-stroke, 60-degree V-twin engine that has a supercharger, a capacity of 1130cc and 120hp max power. It has a liquid-cooled

The post Roehr 1130 (2007) appeared first on MotorcycleSpecifications.com.

]]> The Roehr 1130 (2007) is a powerful motorcycle with a four-stroke, 60-degree V-twin engine that has a supercharger, a capacity of 1130cc and 120hp max power. It has a liquid-cooled cooling system, a wet, multi-plate, hydraulic actuation clutch, and a 5-speed transmission. The bike also has a CrMo steel/aluminum beam frame, ~Ahlins 43mm fully adjustable upside-down fork with TiN front suspension, an ~Ahlins fully adjustable linkless monoshock rear suspension, and strong braking power with 2 x 320mm discs 4 piston calipers front brakes and a single 230mm disc 2 piston caliper rear brake. It has a front tire size of 120/70 ZR17 and a rear tire size of 190/55 ZR17. The seat height is 8800 mm / 31.4 IN and it has a dry weight of 193 kg / 425 LBS. The fuel capacity is 14.4 Litres / 3.8 US gfal.

Technical specifications:

Make Model: Roehr 1260

Year: 2007
Engine: Four stroke, 60 degrees V-twin, DOHC, 4 valve per cylinder. Supercharged
Capacity: 1130 cc / 68.9 cu-in
Bore x Stroke: 100 X 72mm
Cooling System: Liquid cooled
Compression Ratio: 11.3:1
Induction:
Starting: Electric
Max Power: 120 hp
Max Torque: 75 lb-ft
Clutch: Wet, multi-plate, hydraulic actuation
Transmission: 5 Speed
Final Drive: Chain
Frame: CrMo steel/aluminum beam
Front Suspension: ~Ahlins 43mm fully adjustable upside-down fork with TiN
Rear Suspension: ~Ahlins fully adjustable link less monoshock
Front Brakes: 2 x 320mm discs 4 piston calipers
Rear Brakes: Single 230mm disc 2 piston caliper
Front Tyre: 120/70 ZR17
Rear Tyre: 190/55 ZR17
Seat Height: 8800 mm / 31.4 IN
Dry Weight: 193 kg / 425 LBS
Fuel Capacity: 14.4 Litres / 3.8 US gfal

The post Roehr 1130 (2007) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Classic 500 (2017) https://motorcyclespecifications.com/royal-enfield-classic-500-2017-specs/ Sat, 01 Apr 2023 07:39:09 +0000 https://motorcyclespecifications.com/?p=40063 The 2017 Royal Enfield Classic 500 motorcycle features a 499cc engine with a four-stroke, single cylinder, and OHV design. It runs on 15W50 API, SL grade, JASO MA oil and

The post Royal Enfield Classic 500 (2017) appeared first on MotorcycleSpecifications.com.

]]> The 2017 Royal Enfield Classic 500 motorcycle features a 499cc engine with a four-stroke, single cylinder, and OHV design. It runs on 15W50 API, SL grade, JASO MA oil and has a compression ratio of 8.5:1. The bike uses electronic fuel injection for induction and electronic ignition Keihin for ignition. Its maximum power output is 20.3 kW/27.2 hp at 5200 rpm and maximum torque is 41.3 Nm/4.2 kgf-m/30.5 lb-ft at 4000 rpm. The Classic 500 features a single downtube frame and uses the engine as a stress member, while the suspension system comprises a telescopic, hydraulic damping, and twin shocks with gas charge, which are adjustable with 5-step preload. The front and rear wheel travel are 130mm/5.1in and 80mm/3.1in respectively. The motorcycle has a front brake system with a single 280mm disc and a two-piston caliper and a rear brake drum with 152mm diameter and is single leading shoe internal expanding. The wheels are alloy and come with laced wire spokes that measure 3.25 x 19 inches and 3.50 x 19 inches for the front and rear rim, respectively. The bike has a ground clearance of 135mm/5.3in and a seat height of 800mm/31.5in. It weighs 187kg/412lbs and has a fuel capacity of 14.5 litres/3.8 US gal.

Technical specifications:

Make Model: Royal Enfield Bullet Classic 500

Year: 2017
Engine: Four Stroke, single Cylinder, OHV
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Engine Oil: 15W50 API, SL grade, JASO MA
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Exhaust: One-into-one
Ignition: Electronic Ignition Keihin
Starting: Electric & Kick
Max Power: 20.3 kW / 27.2 hp @ 5200 rpm
Max Torque: 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft @ 4000 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Frame: Single downtube, engine used as stress member
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Twin shocks, gas charged with 5-step adjustable preload
Rear Wheel Travel: 80 mm / 3.1 in
Front Brakes: Single 280mm disc, 2 piston caliper
Rear Brakes: Drum, 152 mm, single leading shoe internal expanding
Wheels: Alloy, laced wire spokes
Front Rim: 3.25 x 19
Rear Rim: 3.50 x 19
Front Tyre: 90/90-19
Dimensions: Length: 2180 mm / 85.8 in Width: 800 mm / 31.5 in Height: 1080 mm / 42.5 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 135 mm / 5.3 in
Seat Height: 800 mm / 31.5 in
Wet Weight: 187 kg / 412 lbs
Fuel Capacity: 14.5 Litres / 3.8 US gal

The post Royal Enfield Classic 500 (2017) appeared first on MotorcycleSpecifications.com.

]]> Royal Enflield Interceptor 650 (2018) https://motorcyclespecifications.com/royal-enflield-interceptor-650-2018-specs/ Sat, 01 Apr 2023 01:51:20 +0000 https://motorcyclespecifications.com/?p=39740 The 2018 Royal Enfield Interceptor 650 motorcycle has a four-stroke, parallel twin engine with a capacity of 646cc and a compression ratio of 9.5:1. It has Bosch fuel injection and

The post Royal Enflield Interceptor 650 (2018) appeared first on MotorcycleSpecifications.com.

]]> The 2018 Royal Enfield Interceptor 650 motorcycle has a four-stroke, parallel twin engine with a capacity of 646cc and a compression ratio of 9.5:1. It has Bosch fuel injection and digital electronic ignition, and can be started with either an electric or kick starter. The bike has a slip and assist clutch and a six-speed constant mesh transmission with a final drive chain. The steel tubular double cradle frame supports 41mm telescopic fork front suspension and dual shocks rear suspension. The front brakes consist of a single floating disc with 320mm and 2-piston floating caliper with ABS, while the rear brakes consist of a single disc with 240mm and single floating caliper with ABS. It has spoke wheels with an 18-inch diameter and is equipped with a 100/90-18 front tyre and a 130/70-18 rear tyre. The bike has a 24-degree rake and a seat height of 790mm (31.1 inches) with a dry weight of 198 kg (437 lbs). The fuel capacity for the bike is 12.5 litres (3.3 US gal).

Technical specifications:

Make Model: Royal Enfield Continental GT 650

Year: 2018
Engine: Four stroke, Parallel Twin, SOHC
Capacity: 646 cc / 39.4 cu in
Bore x Stroke: 78 x 67.8mm
Cooling System: Air/oil-cooled
Compression Ratio: 9.5:1
Induction: Bosch fuel injection
Ignition: Digital electronic ignition
Starting: Electric and kick
Max Power: 47 hp / 35 kW
Max Torque: 51.5 Nm / 38 lb-ft
Clutch: Slip and assist
Transmission: 6 Speed, constant mesh
Final Drive: Chain
Frame: Steel tubular, double cradle
Front Suspension: 41mm telescopic fork
Front Wheel Travel: 110 mm / 4.3 in
Rear Suspension: Dual shocks
Rear Wheel Travel: 89 mm / 3.5 in
Front Brakes: Single floating disc, 320 mm, 2 piston floating caliper, ABS
Rear Brakes: Single disc, 240 mm / single floating caliper, ABS
Wheels: Spoke wheels, 18-in
Front Tyre: 100/90 -18
Rear Tyre: 130/70 -18
Rake: 24 degrees
Seat Height: 790 mm / 31.1 in
Dry Weight: 198 kg / 437 lbs
Fuel Capacity: 12.5 Litres / 3.3 US gal

The post Royal Enflield Interceptor 650 (2018) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Bullet 350 (2013-14) https://motorcyclespecifications.com/royal-enfield-bullet-350-2013-14-specs/ Fri, 31 Mar 2023 08:08:02 +0000 https://motorcyclespecifications.com/?p=38762 The Royal Enfield Bullet G5 Military EFI motorcycle was made from 2013-2014 with a four-stroke, single cylinder, OHV engine and a capacity of 499cc. Its air-cooled system has a compression

The post Royal Enfield Bullet 350 (2013-14) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Bullet G5 Military EFI motorcycle was made from 2013-2014 with a four-stroke, single cylinder, OHV engine and a capacity of 499cc. Its air-cooled system has a compression ratio of 8.5:1 with a wet sump lubrication system. The engine oil used is 15W50 API, SL grade, JASO MA. The motorcycle’s Electronic Fuel Injection (EFI) system is powered by a 12V electrical system with a headlamp of 60/55W and tail lamp of 21/5W. The motorcycle has a single one-into-one exhaust and electronic ignition Keihin. There are electric and kick starting options available. The motorcycle has a maximum power of 20.3 kW/27.2 hp at 5200 rpm with a maximum torque of 41.3 Nm/30.5 lb-ft at 4000 rpm. It has a five-speed transmission and a wet, multiplate clutch with a chain final drive. The frame is a single downtube with the engine used as a stress member. The front suspension is telescopic with hydraulic damping with a stroke of 130mm wheel travel. The rear suspension is a swing arm with gas shock absorbers with a stroke of 80mm wheel travel. The front brake is a single 280mm disc with a foot-operated, 153mm drum rear brake. The front and rear tyre sizes are 90/90-19 and 100/90-19 respectively. The motorcycle dimensions are 2160mm (length), 800mm (width), 1050mm (height), and a wheelbase of 1370mm. The seat height is 800mm, and the motorcycle has a dry weight of 168kg with a fuel capacity of 13.5 litres/3.2 US gal.

Technical specifications:

Make Model: Royal Enfield Bullet G5 Military EFI

Year: 2013 – 14
Engine: Four Stroke, single Cylinder, OHV
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Engine Oil: 15W50 API, SL grade, JASO MA
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Exhaust: One-into-one
Ignition: Electronic Ignition Keihin
Starting: Electric & Kick
Max Power: 20.3 kW / 27.2 hp @ 5200 rpm
Max Torque: 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft @ 4000 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Frame: Single downtube, engine used as stress member
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Rear Suspension: Swing Arm With Gas Shock Absorbers, Stroke 80 mm wheel travel
Front Brakes: Single 280mm disc
Rear Brakes: Foot operated, 153 mm drum
Front Tyre: 90/90 -19
Rear Tyre: 100/90 -19
Dimensions: Length 2160 mm / 85.0 in Width 800 mm / 31.5 in Height 1050 mm /
Wheel base: 1370 mm / 53.9 in
Seat Height: 800 mm / 31.5 in
Dry Weight: 168.0 kg / 370.4 lbs
Fuel Capacity: 13.5 Litres / 3.2 US gal

The post Royal Enfield Bullet 350 (2013-14) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Bullet 350 (2013-17) https://motorcyclespecifications.com/royal-enfield-bullet-350-2013-17-specs/ Fri, 31 Mar 2023 08:02:07 +0000 https://motorcyclespecifications.com/?p=38759 The Royal Enfield Bullet Classic 500 motorcycle was produced between 2013 and 2017. It is powered by a four-stroke, single-cylinder engine with a capacity of 499cc and a compression ratio

The post Royal Enfield Bullet 350 (2013-17) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Bullet Classic 500 motorcycle was produced between 2013 and 2017. It is powered by a four-stroke, single-cylinder engine with a capacity of 499cc and a compression ratio of 8.5:1. The bike features electronic fuel injection, a 12V electrical system, and a wet multiplate clutch with a five-speed constant mesh transmission. The single downtube frame uses the engine as a stress member, and the front suspension is a telescopic hydraulic system, while the rear is twin shocks with five-step adjustable preload. The bike has a single 280mm disc front brake with a two-piston caliper, and a rear drum brake with 152mm aluminum rim. It has alloy, laced wire spoke wheels with a front rim size of 3.25 x 19 and a rear rim size of 3.50 x 19. The fuel capacity is 14.5 liters, and the bike weighs 187kg with a seat height of 800mm.

Technical specifications:

Make Model: Royal Enfield Bullet Classic 500

Year: 2013 – 17
Engine: Four Stroke, single Cylinder, OHV
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Engine Oil: 15W50 API, SL grade, JASO MA
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Exhaust: One-into-one
Ignition: Electronic Ignition Keihin
Starting: Electric & Kick
Max Power: 20.3 kW / 27.2 hp @ 5200 rpm
Max Torque: 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft @ 4000 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Frame: Single downtube, engine used as stress member
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Twin shocks, gas charged with 5-step adjustable preload
Rear Wheel Travel: 80 mm / 3.1 in
Front Brakes: Single 280mm disc, 2 piston caliper
Rear Brakes: Drum, 152 mm, single leading shoe internal expanding
Wheels: Alloy, laced wire spokes
Front Rim: 3.25 x 19
Rear Rim: 3.50 x 19
Front Tyre: 90/90-19
Dimensions: Length: 2180 mm / 85.8 in Width: 800 mm / 31.5 in Height: 1080 mm / 42.5 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 135 mm / 5.3 in
Seat Height: 800 mm / 31.5 in
Wet Weight: 187 kg / 412 lbs
Fuel Capacity: 14.5 Litres / 3.8 US gal

The post Royal Enfield Bullet 350 (2013-17) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Classic Satin 500 (2016) https://motorcyclespecifications.com/royal-enfield-classic-satin-500-2016-specs/ Thu, 30 Mar 2023 19:57:03 +0000 https://motorcyclespecifications.com/?p=38085 The Royal Enfield Classic Satin 500 (2016) is a motorcycle that features a four stroke, single cylinder, OHV engine with a capacity of 499 cc. It has a compression ratio

The post Royal Enfield Classic Satin 500 (2016) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Classic Satin 500 (2016) is a motorcycle that features a four stroke, single cylinder, OHV engine with a capacity of 499 cc. It has a compression ratio of 8.5:1 and is air cooled. The bike also has electronic fuel injection (EFI), 12V system, and a wet, multiplate clutch. The transmission is five speed, and the final drive is via a chain. The bike is 2180mm long, 800mm wide, and has a height of 1080mm. It has a wheelbase of 1370mm and a ground clearance of 135mm. The motorcycle has a wet weight of 187 kg and a fuel capacity of 14.5 litres. The front suspension is telescopic, with hydraulic damping and 130mm wheel travel. The rear suspension is twin shocks, gas charged, with a five-step adjustable preload and 80mm wheel travel. The front brakes consist of a single 280mm disc with 2 piston caliper, while the rear brakes are a drum, 152mm, single leading shoe internal expanding system. The bike has alloy wheels with laced wire spokes, with a front rim of 3.25 x 19 and rear rim of 3.50 x 19. The front tyre is 90/90-19. The bike has a max power of 20.3kW / 27.2 hp @ 5200 rpm and a max torque of 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft @ 4000 rpm.

Technical specifications:

Make Model: Royal Enfield Bullet Classic 500

Year: 2016
Engine: Four Stroke, single Cylinder, OHV
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Engine Oil: 15W50 API, SL grade, JASO MA
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Exhaust: One-into-one
Ignition: Electronic Ignition Keihin
Starting: Electric & Kick
Max Power: 20.3 kW / 27.2 hp @ 5200 rpm
Max Torque: 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft @ 4000 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Frame: Single downtube, engine used as stress member
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Twin shocks, gas charged with 5-step adjustable preload
Rear Wheel Travel: 80 mm / 3.1 in
Front Brakes: Single 280mm disc, 2 piston caliper
Rear Brakes: Drum, 152 mm, single leading shoe internal expanding
Wheels: Alloy, laced wire spokes
Front Rim: 3.25 x 19
Rear Rim: 3.50 x 19
Front Tyre: 90/90-19
Dimensions: Length: 2180 mm / 85.8 in Width: 800 mm / 31.5 in Height: 1080 mm / 42.5 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 135 mm / 5.3 in
Seat Height: 800 mm / 31.5 in
Wet Weight: 187 kg / 412 lbs
Fuel Capacity: 14.5 Litres / 3.8 US gal

The post Royal Enfield Classic Satin 500 (2016) appeared first on MotorcycleSpecifications.com.

]]> Royal Enflield Continental GT 650 (2018) https://motorcyclespecifications.com/royal-enflield-continental-gt-650-2018-specs/ Thu, 30 Mar 2023 08:14:00 +0000 https://motorcyclespecifications.com/?p=37432 The Royal Enfield Continental GT 650 motorcycle was released in 2018 and is powered by a four-stroke, parallel twin, SOHC engine with a capacity of 646cc. It has a Bosch

The post Royal Enflield Continental GT 650 (2018) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Continental GT 650 motorcycle was released in 2018 and is powered by a four-stroke, parallel twin, SOHC engine with a capacity of 646cc. It has a Bosch fuel injection system, digital electronic ignition, and is capable of producing a maximum power of 47hp and maximum torque of 51.5Nm. The bike features a slip and assist clutch, a 6-speed constant mesh transmission, and a chain final drive. The frame is a steel tubular, double cradle design with 41mm telescopic fork front suspension and dual shocks rear suspension. The front brake is a single floating disc with a 320mm, 2 piston floating caliper and ABS, while the rear brake is a single disc with a 240mm, single floating caliper and ABS. The wheels are 18-inch spokes with a front tire size of 100/90-18 and rear tire size of 130/70-18. The bike has a rake of 24 degrees, a seat height of 790mm, a dry weight of 198kg, and a fuel capacity of 12.5 liters.

Technical specifications:

Make Model: Royal Enfield Continental GT 650

Year: 2018
Engine: Four stroke, Parallel Twin, SOHC
Capacity: 646 cc / 39.4 cu in
Bore x Stroke: 78 x 67.8mm
Cooling System: Air/oil-cooled
Compression Ratio: 9.5:1
Induction: Bosch fuel injection
Ignition: Digital electronic ignition
Starting: Electric and kick
Max Power: 47 hp / 35 kW
Max Torque: 51.5 Nm / 38 lb-ft
Clutch: Slip and assist
Transmission: 6 Speed, constant mesh
Final Drive: Chain
Frame: Steel tubular, double cradle
Front Suspension: 41mm telescopic fork
Front Wheel Travel: 110 mm / 4.3 in
Rear Suspension: Dual shocks
Rear Wheel Travel: 89 mm / 3.5 in
Front Brakes: Single floating disc, 320 mm, 2 piston floating caliper, ABS
Rear Brakes: Single disc, 240 mm / single floating caliper, ABS
Wheels: Spoke wheels, 18-in
Front Tyre: 100/90 -18
Rear Tyre: 130/70 -18
Rake: 24 degrees
Seat Height: 790 mm / 31.1 in
Dry Weight: 198 kg / 437 lbs
Fuel Capacity: 12.5 Litres / 3.3 US gal

The post Royal Enflield Continental GT 650 (2018) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Bullet 500 Classic Desert Storm (2017) https://motorcyclespecifications.com/royal-enfield-bullet-500-classic-desert-storm-2017-specs/ Thu, 30 Mar 2023 07:48:07 +0000 https://motorcyclespecifications.com/?p=37406 The Royal Enfield Bullet 500 Classic Desert Storm motorcycle was released in 2017 with a four-stroke, single cylinder, OHV engine of 499cc capacity. It has a compression ratio of 8.5:1

The post Royal Enfield Bullet 500 Classic Desert Storm (2017) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Bullet 500 Classic Desert Storm motorcycle was released in 2017 with a four-stroke, single cylinder, OHV engine of 499cc capacity. It has a compression ratio of 8.5:1 and uses wet sump lubrication with 15W50 API, SL grade, JASO MA engine oil. Induction is via electronic fuel injection, and ignition is electronic. The bike has both electric and kick starting options. The Bullet 500 Classic Desert Storm produces a maximum power of 20.3 kW at 5200 rpm and a maximum torque of 41.3 Nm at 4000 rpm. The clutch is wet multiplate and the transmission is a 5-speed constant mesh, with a single downtube frame that uses the engine as a stress member. The front suspension is telescopic with hydraulic damping and a wheel travel of 130mm, while the rear suspension is twin shocks, gas charged and with adjustable preload. The front brake is a single 280mm disc with a 2 piston caliper, and the rear brake is a drum with a 152mm single leading shoe internal expanding. The wheels are alloy with laced wire spokes, and the front and rear rims measure 3.25 x 19 and 3.50 x 19, respectively, while the front tyre size is 90/90-19. The dimensions of the bike are 2180mm x 800mm x 1080mm, with a wheelbase of 1370mm, a ground clearance of 135mm, and a seat height of 800mm. Its wet weight is 187kg, and its fuel capacity is 14.5 litres.

Technical specifications:

Make Model: Royal Enfield Bullet 500 Classic Desert Storm

Year: 2017
Engine: Four Stroke, single Cylinder, OHV
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Engine Oil: 15W50 API, SL grade, JASO MA
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Exhaust: One-into-one
Ignition: Electronic Ignition Keihin
Starting: Electric & Kick
Max Power: 20.3 kW / 27.2 hp @ 5200 rpm
Max Torque: 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft @ 4000 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Frame: Single downtube, engine used as stress member
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Twin shocks, gas charged with 5-step adjustable preload
Rear Wheel Travel: 80 mm / 3.1 in
Front Brakes: Single 280mm disc, 2 piston caliper
Rear Brakes: Drum, 152 mm, single leading shoe internal expanding
Wheels: Alloy, laced wire spokes
Front Rim: 3.25 x 19
Rear Rim: 3.50 x 19
Front Tyre: 90/90-19
Dimensions: Length: 2180 mm / 85.8 in Width: 800 mm / 31.5 in Height: 1080 mm / 42.5 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 135 mm / 5.3 in
Seat Height: 800 mm / 31.5 in
Wet Weight: 187 kg / 412 lbs
Fuel Capacity: 14.5 Litres / 3.8 US gal

The post Royal Enfield Bullet 500 Classic Desert Storm (2017) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Thunderbird 500 (2002) https://motorcyclespecifications.com/royal-enfield-thunderbird-500-2002-specs/ Wed, 29 Mar 2023 21:42:00 +0000 https://motorcyclespecifications.com/?p=36830 The Royal Enfield Thunderbird 500 was a motorcycle model produced in 2002. It had an air-cooled, four-stroke, single-cylinder OHV engine with a capacity of 499 cc and a bore and

The post Royal Enfield Thunderbird 500 (2002) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Thunderbird 500 was a motorcycle model produced in 2002. It had an air-cooled, four-stroke, single-cylinder OHV engine with a capacity of 499 cc and a bore and stroke of 84 x 90 mm. Its compression ratio was 8.5:1, and it was equipped with electronic fuel injection (EFI) and a 12V system. The ignition system was electronic, and it had both electric and kick start options. The Thunderbird 500 had a maximum power output of 27.2 hp at 5250 rpm and a maximum torque of 41.3 Nm at 4000 rpm. The transmission was a 5-speed left-foot gear shift with a chain drive. The front suspension consisted of telescopic 41mm forks with 130mm travel, and the rear had twin gas-charged shock absorbers with 5-step adjustable preload and 80mm travel. The front brakes were a single 280mm disc with a 2 piston caliper, while the rear had a single 240mm disc with a 1 piston caliper. The tires were 90/90-19 in the front and 120/80-18 in the rear, and the wheelbase was 1350mm. The wet weight of the Thunderbird 500 was 195 kg, and it had a fuel capacity of 20 liters.

Technical specifications:

Make Model: Royal Enfield Thunderbird

Year: 2002
Engine: Air Cooled, four Stroke, single Cylinder, OHV,
Capacity: 499
Bore x Stroke: 84 x 90 mm
Compression Ratio: 8.5: 1
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Ignition / Starting: Electronic Ignition / Electric and Kick Start
Max Power: 27.2 hp @ 5250 rpm
Max Torque: 41.3 Nm @ 4000 rpm
Transmission / Drive: 5 Speed (left foot gear shift) / chain
Front Suspension: Telescopic, 41mm forks, 130mm travel
Rear Suspension: Twin gas charged shock absorbers with 5-step adjustable preload, 80mm travel
Front Brakes: Single 280mm disc 2 piston caliper
Rear Brakes: Single 240mm disc 1 piston caliper
Front Tyre: 90/90 -19
Rear Tyre: 120/80 -18
Wheel base: 1350mm
Wet Weight: 195 Kg
Fuel Capacity: 20 Litres

The post Royal Enfield Thunderbird 500 (2002) appeared first on MotorcycleSpecifications.com.

]]> Rider Auto (1982) https://motorcyclespecifications.com/rider-auto-1982-specs-6/ Wed, 29 Mar 2023 12:59:58 +0000 https://motorcyclespecifications.com/?p=36347 The Rider X88 1982 motorcycle has a four-stroke, 90 degree V-twin engine with 2 valves per cylinder and a capacity of 44 ci / 738 cc. The cooling system is

The post Rider Auto (1982) appeared first on MotorcycleSpecifications.com.

]]> The Rider X88 1982 motorcycle has a four-stroke, 90 degree V-twin engine with 2 valves per cylinder and a capacity of 44 ci / 738 cc. The cooling system is air cooled, and the compression ratio is 8.5:1. It has an electric starting system and a 2-stage exhaust that is muffled and baffled. The automatic CVT Type II transmission drives the belt final drive. The front tyre is 21″/53.3cm with 60 spokes, and the rear tyre is 16″/40.6cm with 60 spokes. The seat height measures 24.5 in / 622 mm, and the dry weight is 460 lbs. / 209 kg. The fuel capacity is 4.2 gal / 15.9 litres. The bike has a single disc 4-piston caliper for the front brake and a single disc 1-piston caliper for the rear brake.

Technical specifications:

Make Model: Rider X88

Engine: Four stroke, 90 degrees V-Twin, 2 valve per cylinder
Capacity: 44 ci / 738 cc
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Induction:
Starting: Electric
Exhaust: 2 Stage: Muffled, Baffled
Transmission: Automatic CVT Type II
Final Drive: Belt
Front Brakes: Single disc 4 piston caliper
Rear Brakes: Single disc 1 piston caliper
Front Tyre: 21″/53.3cm | 60 Spoke
Rear Tyre: 16″/40.6cm | 60 Spoke
Seat Height: 24.5 in / 622 mm
Dry Weight: 460 lbs. / 209 kg
Fuel Capacity: 4.2 gal / 15.9 Litres

The post Rider Auto (1982) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Classic Chrome 500 (2013-14) https://motorcyclespecifications.com/royal-enfield-classic-chrome-500-2013-14-specs/ Wed, 29 Mar 2023 07:22:15 +0000 https://motorcyclespecifications.com/?p=36031 The Royal Enfield Classic Chrome 500 EFI is a 2013-14 motorcycle with a four-stroke, single-cylinder, OHV engine that has a capacity of 499 cc / 30.4 cu-in. It has a

The post Royal Enfield Classic Chrome 500 (2013-14) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Classic Chrome 500 EFI is a 2013-14 motorcycle with a four-stroke, single-cylinder, OHV engine that has a capacity of 499 cc / 30.4 cu-in. It has a compression ratio of 8.5:1 and a lubrication system that uses wet sump and 15W50 API, SL grade, JASO MA engine oil. The bike has electronic fuel injection (EFI) and electronic ignition Keihin. It can be started both electrically and with a kick. At 5200 rpm, the motorcycle’s maximum power is 20.3 kW / 27.2 hp, and its maximum torque is 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft at 4000 rpm. The bike has a wet, multiplate clutch and a five-speed, constant-mesh transmission. The Royal Enfield Classic Chrome 500 EFI has a single downtube frame with the engine used as a stress member. The front suspension is telescopic, hydraulic damping, with a 130 mm wheel travel, while the rear suspension is twin shocks, gas-charged with a five-step adjustable preload, with a rear wheel travel of 80 mm / 3.1 in. The motorcycle has alloy, laced wire spokes wheels with a front rim of 3.25 x 19 and a rear rim of 3.50 x 19. The front brake is a single 280-mm disc with a two-piston caliper, while the rear brake is a drum, 152 mm, single leading shoe internal expanding with the chain acting as the final drive. The dimensions of the Royal Enfield Classic Chrome 500 are 2180 mm / 85.8 in length, 800 mm / 31.5 in width, and 1080 mm / 42.5 in height, with a wheelbase of 1370 mm / 53.9 in. The motorcycle has a ground clearance of 135 mm / 5.3 in and a seat height of 800 mm / 31.5 in. It weighs 187 kg / 412 lbs and has a fuel capacity of 14.5 Litres / 3.8 US gal.

Technical specifications:

Make Model: Royal Enfield Bullet Chrome 500 EFI

Year: 2013 – 14
Engine: Four Stroke, single Cylinder, OHV
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Engine Oil: 15W50 API, SL grade, JASO MA
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Exhaust: One-into-one
Ignition: Electronic Ignition Keihin
Starting: Electric & Kick
Max Power: 20.3 kW / 27.2 hp @ 5200 rpm
Max Torque: 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft @ 4000 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Frame: Single downtube, engine used as stress member
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Twin shocks, gas charged with 5-step adjustable preload
Rear Wheel Travel: 80 mm / 3.1 in
Front Brakes: Single 280mm disc, 2 piston caliper
Rear Brakes: Drum, 152 mm, single leading shoe internal expanding
Wheels: Alloy, laced wire spokes
Front Rim: 3.25 x 19
Rear Rim: 3.50 x 19
Front Tyre: 90/90-19
Dimensions: Length: 2180 mm / 85.8 in Width: 800 mm / 31.5 in Height: 1080 mm / 42.5 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 135 mm / 5.3 in
Seat Height: 800 mm / 31.5 in
Wet Weight: 187 kg / 412 lbs
Fuel Capacity: 14.5 Litres / 3.8 US gal

The post Royal Enfield Classic Chrome 500 (2013-14) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Himalayan (2016) https://motorcyclespecifications.com/royal-enfield-himalayan-2016-specs/ Wed, 29 Mar 2023 05:44:00 +0000 https://motorcyclespecifications.com/?p=35939 The Royal Enfield 411 Himalayan motorcycle was released in 2016 and features a four-stroke, single-cylinder, SOHC engine with a capacity of 411 cc / 25.0 cu in. It has a

The post Royal Enfield Himalayan (2016) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield 411 Himalayan motorcycle was released in 2016 and features a four-stroke, single-cylinder, SOHC engine with a capacity of 411 cc / 25.0 cu in. It has a compression ratio of 9.5:1 and a wet sump lubrication system with a carburetor that has a throttle position sensor. The maximum power output is 24.5 hp / 18.02 kW at 6500 rpm and maximum torque is 32 Nm / 23.6 ft/lb at 4000 – 4500 rpm. The motorcycle has a wet, multi-plate clutch and a 5-speed transmission with a final drive chain. The frame is a half-duplex split cradle frame and the front suspension consists of 41 mm telescopic forks with front wheel travel of 200 mm / 7.87 in. The rear suspension is a monoshock with linkage and rear wheel travel of 180 mm / 7.08 in. The front brakes are a single 300mm disc with 2-piston floating caliper and the rear brakes are a single 240mm disc with a single-piston floating caliper. The dimensions of the motorcycle are Length 2190 mm / 86.2 in, Width 840 mm / 33.0 in, and Height 1360 mm / 53.54 in (flyscreen top) with a wheelbase of 1465 mm / 57.6 in, seat height of 800 mm / 31.49 in, and ground clearance of 220 mm / 8.6 in. The wet weight is 182 kg / 401 lbs and it has a fuel capacity of 15 Litres / 3.9 US gal.

Technical specifications:

Make Model: Royal Enfield 411 Himalayan

Year: 2016 –
Engine: Four stroke, single cylinder, SOHC
Capacity: 411 cc / 25.0 cu in
Bore x Stroke: 78 x 86 mm
Compression Ratio: 9.5:1
Cooling System: Air cooled
Lubrication: Wet sump
Induction: Carburetor with throttle position sensor
Ignition: Wet sump
Starting: Electric
Max Power: 24.5 hp / 18.02 kW @ 6500 rpm
Max Torque: 32 Nm / 23.6 ft/lb @ 4000 – 4500 rpm
Clutch: Wet, multi-plate
Transmission: 5 Speed
Final Drive: Chain
Frame: Half-duplex split cradle frame
Front Suspension: 41 mm Telescopic forks
Front Wheel Travel: 200 mm / 7.87 in
Rear Suspension: Monoshock with linkage
Rear Wheel Travel: 180 mm / 7.08 in
Front Brakes: Single 300mm disc, 2-piston floating calliper
Rear Brakes: Single 240mm disc, single-piston floating calliper
Front Tyre: 90/90 21
Rear Tyre: 120/90 17
Dimensions: Length 2190 mm / 86.2 in Width 840 mm / 33.0 in Height 1360 mm / 53.54 in (flyscreen top)
Wheelbase: 1465 mm / 57.6 in
Seat Height: 800 mm / 31.49 in
Ground Clearance: 220 mm / 8.6 in
Wet Weight: 182 kg / 401 lbs
Fuel Capacity: 15 Litres / 3.9 US gal

The post Royal Enfield Himalayan (2016) appeared first on MotorcycleSpecifications.com.

]]> Rider Auto (1982) https://motorcyclespecifications.com/rider-auto-1982-specs-5/ Tue, 28 Mar 2023 22:59:56 +0000 https://motorcyclespecifications.com/?p=35566 The Rider Auto Glide TT motorcycle, manufactured in 1982, is equipped with a four-stroke, air-cooled V-twin engine, with a capacity of 44 cubic inches or 738cc, and a compression ratio

The post Rider Auto (1982) appeared first on MotorcycleSpecifications.com.

]]> The Rider Auto Glide TT motorcycle, manufactured in 1982, is equipped with a four-stroke, air-cooled V-twin engine, with a capacity of 44 cubic inches or 738cc, and a compression ratio of 8.5:1. The bike has an automatic CVT Type II transmission and a belt final drive. It has a single disc four-piston caliper front brake and a single disc one-piston caliper rear brake. The motorcycle has a seat height of 24.5 inches or 622mm and a dry weight of 460 pounds or 209 kg. It has a fuel capacity of 4.2 gallons or 15.9 litres. Additionally, the Rider Auto Glide TT has a 2-stage exhaust system, with mufflers and baffles, and 60 spoke 21-inch front and 16-inch rear tyres. This bike was produced by Rider Auto, a Taiwanese company that was founded in 1972 and is known for producing high-quality motorcycles, scooters, and ATV’s. The Rider Auto Glide TT was designed for cruising and touring, and its automatic transmission and comfortable seating made it an easy-to-ride and enjoyable bike for long journeys. Although it has been discontinued, this classic motorcycle remains a popular choice among collectors and enthusiasts.

Technical specifications:

Make Model: Rider Auto Glide TT

Engine: Four stroke, 90 degrees V-Twin, 2 valve per cylinder
Capacity: 44 ci / 738 cc
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Induction:
Starting: Electric
Exhaust: 2 Stage: Muffled, Baffled
Transmission: Automatic CVT Type II
Final Drive: Belt
Front Brakes: Single disc 4 piston caliper
Rear Brakes: Single disc 1 piston caliper
Front Tyre: 21″/53.3cm | 60 Spoke
Rear Tyre: 16″/40.6cm | 60 Spoke
Seat Height: 24.5 in / 622 mm
Dry Weight: 460 lbs. / 209 kg
Fuel Capacity: 4.2 gal / 15.9 Litres

The post Rider Auto (1982) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Bullet 350 (2009) https://motorcyclespecifications.com/royal-enfield-bullet-350-2009-specs/ Tue, 28 Mar 2023 20:07:59 +0000 https://motorcyclespecifications.com/?p=35403 The Royal Enfield Bullet 350 (2009) is a motorcycle with a four-stroke, single-cylinder, OHV engine with a capacity of 499 cc/30.4 cu-in. It has an electronic fuel injection induction system

The post Royal Enfield Bullet 350 (2009) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Bullet 350 (2009) is a motorcycle with a four-stroke, single-cylinder, OHV engine with a capacity of 499 cc/30.4 cu-in. It has an electronic fuel injection induction system and a 12V electrical system with a headlamp of 60/55W and a tail lamp of 21/5W. The clutch is a multi-plate, and the transmission is five-speed with a left foot gear shift. The motorcycle has a chain final drive and a front suspension of telescopic hydraulic damping with a stroke of 130 mm wheel travel. The rear suspension is a swing arm with gas shock absorbers and a stroke of 80 mm wheel travel. It has drum brakes of 7 in for both the front and the rear, with front tires of 3.25-19 and rear tires of 3.50-19. The dimensions of the motorcycle are length 2160 mm/85.0 in, width 800 mm/31.5 in, height 1050 mm, and a wheelbase of 1370 mm/53.9 in. The seat height is 800 mm/31.5 in. The dry weight of the motorcycle is 168.0 kg/370.4 lbs, and the fuel capacity is 13.5 liters/3.2 US gal.

Technical specifications:

Make Model: Royal Enfield Bullet 500 Deluxe

Year: 2009 –
Engine: Four Stroke, single Cylinder, OHV
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Ignition: Electronic Ignition
Starting: Kick
Max Power: 27.2 hp / @ 5250 rpm
Max Torque: 41.3 Nm / 30.4 lb-ft @ 4000 rpm
Clutch: Mulitiplate
Transmission: 5 Speed (left foot gear shift)
Final Drive: Chain
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Rear Suspension: Swing Arm With Gas Shock Absorbers, Stroke 80 mm wheel travel
Front Brakes: Drum 7 in
Rear Brakes: Drum 7 in
Front Tyre: 3.25-19
Rear Tyre: 3.50 -19
Dimensions: Length 2160 mm / 85.0 in Width 800 mm / 31.5 in Height 1050 mm /
Wheel base: 1370 mm / 53.9 in
Seat Height: 800 mm / 31.5 in
Dry Weight: 168.0 kg / 370.4 lbs
Fuel Capacity: 13.5 Litres / 3.2 US gal

The post Royal Enfield Bullet 350 (2009) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Bullet 500 ( ) https://motorcyclespecifications.com/royal-enfield-bullet-500-specs/ Tue, 28 Mar 2023 17:20:04 +0000 https://motorcyclespecifications.com/?p=35250 The Royal Enfield Bullet 500 is a motorcycle model that was first manufactured in the year. This bike features a four-stroke, single-cylinder, overhead valve engine with a displacement of 499

The post Royal Enfield Bullet 500 ( ) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Bullet 500 is a motorcycle model that was first manufactured in the year. This bike features a four-stroke, single-cylinder, overhead valve engine with a displacement of 499 cc. The bore and stroke of the engine are 84 mm and 90 mm, respectively. The bike is air-cooled and runs on a carburettor induction system. The compression ratio for the engine is 8.5:1.

The Royal Enfield Bullet 500 is an electric bike that has a 12V system including headlamps, tail lamps, and an ignition system. The maximum power output of the bike is 27.2 hp at 5250 rpm, while the peak torque is 41.3 Nm at 4000 rpm. The bike features a multiplate clutch system and a 4-speed transmission.

The bike has a chain drive for the final drive, and its front suspension comes with hydraulic damping with a stroke of 130 mm of wheel travel. The back suspension features a swing arm with gas shock absorbers and a wheel travel of 80 mm. Both the front and back brakes of the bike consist of drum brakes.

The size of the front and back tyres are 90/90 -19 and 100/90 -19 respectively. The wheelbase of the bike is 1370 mm, and its seat height is 800 mm. The dry weight of the bike is 168.0 kg, and it has a fuel capacity of 13.5 litres.

Technical specifications:

Make Model: Royal Enfield Bullet 500

Year:
Engine: Four Stroke, single Cylinder, OHV, 2 valve
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Induction: Carburettor
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Ignition:
Starting: Kick
Max Power: 27.2 hp / @ 5250 rpm
Max Torque: 41.3 Nm / 30.4 lb-ft @ 4000 rpm
Clutch: Mulitiplate
Transmission: 4 Speed
Final Drive: Chain
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Rear Suspension: Swing Arm With Gas Shock Absorbers, Stroke 80 mm wheel travel
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 90/90 -19
Rear Tyre: 100/90 -19
Wheel base: 1370 mm / 53.9 in
Seat Height: 800 mm / 31.5 in
Dry Weight: 168.0 kg / 370.4 lbs
Fuel Capacity: 13.5 Litres / 3.2 US gal

The post Royal Enfield Bullet 500 ( ) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Bullet Classic 500 Lewis Leathers Limited Edition (2011-12) https://motorcyclespecifications.com/royal-enfield-bullet-classic-500-lewis-leathers-limited-edition-2011-12-specs/ Tue, 28 Mar 2023 08:14:09 +0000 https://motorcyclespecifications.com/?p=34737 The Royal Enfield Bullet Classic 500 Lewis Leathers Limited Edition is a motorcycle from 2011-2012 with a four-stroke, single-cylinder, OHV engine and a capacity of 499 cc. It has a

The post Royal Enfield Bullet Classic 500 Lewis Leathers Limited Edition (2011-12) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Bullet Classic 500 Lewis Leathers Limited Edition is a motorcycle from 2011-2012 with a four-stroke, single-cylinder, OHV engine and a capacity of 499 cc. It has a compression ratio of 8.5:1 and a wet sump lubrication system using 15W50 API, SL grade, JASO MA engine oil. The bike uses electronic fuel injection (EFI) for induction and has a 12V electrical system, with a headlamp of 60/55W and a tail lamp of 21/5W. The ignition is electronic through Keihin, and the bike can be started with either electric or kick. The motorcycle has a maximum power of 20.3 kW/27.2 hp at 5200 rpm and a maximum torque of 41.3 Nm/4.2 kgf-m/30.5 lb-ft at 4000 rpm. Its transmission is a 5-speed, constant mesh system with a wet, multiplate clutch and a chain final drive. The Royal Enfield Bullet Classic 500 Lewis Leathers Limited Edition features a single downtube frame with the engine acting as a stress member. The front suspension is telescopic with hydraulic damping and 130 mm wheel travel, while the rear suspension is twin shocks, gas-charged with 5-step adjustable preload and 80 mm wheel travel. The front brakes are single 280mm discs with two-piston calipers, while the rear brakes are drums, 152 mm with a single leading shoe internal expanding system. It has alloy wheels with laced wire spokes, with a 3.25 x 19 front rim and 3.50 x 19 rear rim. The bike measures 2180 mm in length, 800 mm in width, and 1080 mm in height, with a wheelbase of 1370 mm and a ground clearance of 135 mm. The wet weight of the motorcycle is 187 kg, and it has a fuel capacity of 14.5 liters or 3.8 US gallons.

Technical specifications:

Make Model: Royal Enfield Bullet Classic 500 Lewis Leathers Limited Edition

Year: 2011 – 12
Engine: Four Stroke, single Cylinder, OHV
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Engine Oil: 15W50 API, SL grade, JASO MA
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Exhaust: One-into-one
Ignition: Electronic Ignition Keihin
Starting: Electric & Kick
Max Power: 20.3 kW / 27.2 hp @ 5200 rpm
Max Torque: 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft @ 4000 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Frame: Single downtube, engine used as stress member
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Twin shocks, gas charged with 5-step adjustable preload
Rear Wheel Travel: 80 mm / 3.1 in
Front Brakes: Single 280mm disc, 2 piston caliper
Rear Brakes: Drum, 152 mm, single leading shoe internal expanding
Wheels: Alloy, laced wire spokes
Front Rim: 3.25 x 19
Rear Rim: 3.50 x 19
Front Tyre: 90/90-19
Dimensions: Length: 2180 mm / 85.8 in Width: 800 mm / 31.5 in Height: 1080 mm / 42.5 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 135 mm / 5.3 in
Seat Height: 800 mm / 31.5 in
Wet Weight: 187 kg / 412 lbs
Fuel Capacity: 14.5 Litres / 3.8 US gal

The post Royal Enfield Bullet Classic 500 Lewis Leathers Limited Edition (2011-12) appeared first on MotorcycleSpecifications.com.

]]> Junak WB1/WB3 (1959-65) https://motorcyclespecifications.com/junak-wb1-wb3-1959-65-specs/ Tue, 28 Mar 2023 07:04:09 +0000 https://motorcyclespecifications.com/?p=34672 The Junak WB1/WB3 was a motorbike produced from 1959-65, totaling 8500 units. It was powered by a four-stroke, single-cylinder, OHV engine with a capacity of 349 cc and a compression

The post Junak WB1/WB3 (1959-65) appeared first on MotorcycleSpecifications.com.

]]> The Junak WB1/WB3 was a motorbike produced from 1959-65, totaling 8500 units. It was powered by a four-stroke, single-cylinder, OHV engine with a capacity of 349 cc and a compression ratio of 7.0:1. The bike was air/oil-cooled and lubricated by dry-sump. It had a max power of 14 kW / 19 hp at 6000 rpm and a max torque of 27.5 Nm / 2.8 kgf-m / 20.3 ft-lb at 3800 rpm, with a top speed of 85 km/h / 52.8 mph. The Clutch was a multi-plate clutch with cork inserts working in an oil bath, and the dynamo was 45 W. The transmission was four-speed constant-mesh, and the final drive was a chain. The frame was double cradle type, telescopic front shock absorbers, and independent rear wheel suspension. The brakes were full hub width of expander shoe type with hand and foot operating. The wheels were interchangeable wire type with quick-detachable spindles, and the front and rear wheels had a rim of 89 mm / 3.5 in. The bike had an overall length of 2195 mm / 86.4 in, width of 1490 mm / 58.7 in and a height of 1120 mm / 44.1 in. Additionally, it came with a sidecar that had dimensions of 1800 mm / 70.9 in in length and 1120 mm / 44.1 in in height. The wet weight of the bike (including the sidecar) was 260 kg / 573.2 lbs, and the load capacity was 210 kg / 463 lbs. The fuel capacity was 17 l / 3.9 US gal, and the average consumption was 5.7 l/100 km / 17.5 km/l / 41.3 mpg.

Technical specifications:

Make Model: Junak WB1/WB3

Year: 1959 – 65
Production: 8500
Engine: Four stroke, single cylinder, OHV
Capacity: 349 cc / 21.3 cub. in.
Bore x Stroke: 75 x 79 mm
Compression Ratio: 7.0:1
Cooling: Air/Oil cooled
Lubrication: Dry-sump
Ignition: Magneto
Battery: 14 Ah, 6V
Dynamo: 45 W
Starting: Kick-start
Clutch: Multi-plate clutch with cork inserts working in an oil bath
Max Power: 14 kW / 19 hp @ 6000 rpm
Max Torque: 27.5 Nm / 2.8 kgf-m / 20.3 ft-lb @3800 rpm
Transmission: Four-speed constant-mesh
Final Drive: Chain
Gear ratios: 1st 3.04 / 2nd 1.97 / 3rd 1.29 / 4th 1.00:1
Frame: Double, cradle-type, welded throughout of tubing, provided with holders for side car mounting.
Front Suspension: Fork with coil springs telescopic shock absorbers
Rear Suspension: Independent rear wheel suspension on single wishbone , cooperating with 7- leaf spring positioned transversely;
Front Brakes: Full hub width, of expander shoe type, hand operated
Rear Brakes: Full hub width, of expander shoe type, foot operated
Wheels: Wire type, with full width hubs made of light alloy, interchangeable (also with side-car wheel). Both wheels with quick-detachable spindles
Front Tyre: 19 in
Rear Tyre: 12 in
Front Rim: 89 mm / 3.5 in
Rear Rim: 89 mm / 3.5 in
Trail: 72 mm / 2.8 in
Overall Dimensions: Length: 2195 mm / 86.4 in Width: 1490 mm / 58.7 in Height: 1120 mm / 44.1 in
Dimensions of Sidecar: Length: 1800 mm / 70.9 in Height: 1120 mm / 44.1 in
Rear Track: 1020 mm / 40.2 in.
Wheel Base: 2010 mm / 79 in
Seat Height: 755 mm / 29.7 in
Ground Clearance: 170 mm / 6.7 in
Wet Weight (incl sidecar): 260 kg / 573.2 lbs
Weight of Sidecar: 67 kg / 147.7 lbs
Load Capacity: 210 kg / 463 lbs
Fuel Capacity: 17 l / 3.9 US gal
Average Consumption: 5.7 l/100 km / 17.5 km/l / 41.3 mpg
Top Speed: 85 km/h / 52.8 mph
Source: Article by T. Tomaszewski in ‘Swiat motocykli 2003.

The post Junak WB1/WB3 (1959-65) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Bullet 500 Classic Battle Green (2017) https://motorcyclespecifications.com/royal-enfield-bullet-500-classic-battle-green-2017-specs/ Tue, 28 Mar 2023 05:04:01 +0000 https://motorcyclespecifications.com/?p=34560 The Royal Enfield Bullet 500 Classic Battle Green motorcycle has a four-stroke, single-cylinder, OHV engine with a capacity of 499 cc. It is air-cooled with a compression ratio of 8.5:1

The post Royal Enfield Bullet 500 Classic Battle Green (2017) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Bullet 500 Classic Battle Green motorcycle has a four-stroke, single-cylinder, OHV engine with a capacity of 499 cc. It is air-cooled with a compression ratio of 8.5:1 and a lubrication system of wet sump. The bike uses electronic fuel injection (EFI) for induction and has a 12-volt electrical system. It has a maximum power of 20.3 kW at 5200 rpm and a maximum torque of 41.3 Nm at 4000 rpm. The motorcycle has a wet, multi-plate clutch and a 5-speed, constant mesh transmission with a chain final drive. The frame is a single downtube with the engine used as a stress member. The front suspension is telescopic, hydraulic damping with a stroke of 130mm wheel travel, and the rear suspension is twin shocks, gas-charged with a 5-step adjustable preload and 80mm wheel travel. It has a single 280mm disc front brake and a drum rear brake, and the wheels are alloy with laced wire spokes. The motorcycle measures 2180mm in length, 800mm in width, and 1080mm in height, with a wheelbase of 1370mm, ground clearance of 135mm, and seat height of 800mm. It has a wet weight of 187kg and a fuel capacity of 14.5 litres.

Technical specifications:

Make Model: Royal Enfield Bullet 500 Classic Battle Green

Year: 2017
Engine: Four Stroke, single Cylinder, OHV
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Engine Oil: 15W50 API, SL grade, JASO MA
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Exhaust: One-into-one
Ignition: Electronic Ignition Keihin
Starting: Electric & Kick
Max Power: 20.3 kW / 27.2 hp @ 5200 rpm
Max Torque: 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft @ 4000 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Frame: Single downtube, engine used as stress member
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Twin shocks, gas charged with 5-step adjustable preload
Rear Wheel Travel: 80 mm / 3.1 in
Front Brakes: Single 280mm disc, 2 piston caliper
Rear Brakes: Drum, 152 mm, single leading shoe internal expanding
Wheels: Alloy, laced wire spokes
Front Rim: 3.25 x 19
Rear Rim: 3.50 x 19
Front Tyre: 90/90-19
Dimensions: Length: 2180 mm / 85.8 in Width: 800 mm / 31.5 in Height: 1080 mm / 42.5 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 135 mm / 5.3 in
Seat Height: 800 mm / 31.5 in
Wet Weight: 187 kg / 412 lbs
Fuel Capacity: 14.5 Litres / 3.8 US gal

The post Royal Enfield Bullet 500 Classic Battle Green (2017) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Bullet Clubman (2012) https://motorcyclespecifications.com/royal-enfield-bullet-clubman-2012-specs/ Mon, 27 Mar 2023 14:48:21 +0000 https://motorcyclespecifications.com/?p=33745 The Royal Enfield Bullet Clubman is a 2012 motorcycle with a four-stroke, single cylinder, OHV engine and a capacity of 499 cc. It has a compression ratio of 8.5:1 and

The post Royal Enfield Bullet Clubman (2012) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Bullet Clubman is a 2012 motorcycle with a four-stroke, single cylinder, OHV engine and a capacity of 499 cc. It has a compression ratio of 8.5:1 and uses wet sump lubrication with 15W50 API, SL grade, JASO MA engine oil. The bike has electronic fuel injection (EFI) for induction and electronic ignition Keihin for ignition. It can be started with both electric and kick options. The Bullet Clubman has a maximum power output of 20.3 kW / 27.2 hp at 5200 rpm and a maximum torque of 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft at 4000 rpm. The transmission has 5-speed constant mesh and the final drive is a chain. The frame is a single downtube, and the engine is used as a stress member. The front suspension is telescopic with hydraulic damping, and the rear suspension is a swing arm with gas shock absorbers. The bike has a single 280mm disc brake in the front and a foot-operated, 153mm drum brake in the rear. The dimensions of the motorcycle are 2160 mm in length, 800 mm in width (handlebars), and 1050 mm in height with a wheelbase of 1370 mm. The seat height is 800 mm, and the bike has a wet weight of 187 kg. The fuel tank can hold 13.5 liters (3.2 gal) of fuel.

Technical specifications:

Make Model: Royal Enfield Bullet Clubman

Year: 2012
Engine: Four Stroke, single Cylinder, OHV
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Engine Oil: 15W50 API, SL grade, JASO MA
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Exhaust: One-into-one
Ignition: Electronic Ignition Keihin
Starting: Electric & Kick
Max Power: 20.3 kW / 27.2 hp @ 5200 rpm
Max Torque: 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft @ 4000 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Frame: Single downtube, engine used as stress member
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Rear Suspension: Swing Arm With Gas Shock Absorbers, Stroke 80 mm wheel travel
Front Brakes: Single 280mm disc
Rear Brakes: Foot operated, 153 mm drum
Front Tyre: 90/90 -19
Rear Tyre: 120/80 -18
Dimensions: Length: 2160 mm / Width (Handle bars) 800 mm / Height: 1050 mm
Wheel base: 1370 mm
Seat Height: 800 mm
Wet Weight: 187 Kg
Fuel Capacity: 13.5 Litres / 3.2 gal

The post Royal Enfield Bullet Clubman (2012) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Scrambler / Trails EFI (2009-12) https://motorcyclespecifications.com/royal-enfield-scrambler-trails-efi-2009-12-specs/ Mon, 27 Mar 2023 14:20:04 +0000 https://motorcyclespecifications.com/?p=33719 The Royal Enfield Bullet Scrambler/Trails EFI motorcycle was produced between 2009 and 2012. It has an air-cooled, four-stroke, single-cylinder, OHV engine with a capacity of 499cc, a compression ratio of

The post Royal Enfield Scrambler / Trails EFI (2009-12) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Bullet Scrambler/Trails EFI motorcycle was produced between 2009 and 2012. It has an air-cooled, four-stroke, single-cylinder, OHV engine with a capacity of 499cc, a compression ratio of 8.5:1, and an electronic fuel injection (EFI) induction system. It has a 12V electrical system with a headlamp of 60/55W and a tail lamp of 21/5W. The motorcycle can be started electronically or by using the kick start. It has a maximum power of 27.2 hp at 5250 rpm and a maximum torque of 41.3 Nm at 4000 rpm. The 5-speed transmission is equipped with a left foot gear shift and is driven by a chain. The front suspension is a telescopic hydraulic damping system with a stroke of 130mm, while the rear suspension has a swing arm with gas shock absorbers and a stroke of 80mm. The front brake is a single 280mm disc, and the rear brake is a foot-operated, 153mm drum. The motorcycle has a front tyre of 90/90-19 and a rear tyre of 100/90-19. It measures 2160mm in length, 800mm in width at the handlebars, and 1050mm in height. Its wheelbase is 1370mm and its seat height is 800mm. It has a wet weight of 187kg and a fuel capacity of 13.5 litres or 3.2 gallons.

Technical specifications:

Make Model: Royal Enfield Bullet Scrambler / Trails EFI

Year: 2009 – 12
Engine: Air Cooled, four Stroke, single Cylinder, OHV,
Capacity: 499
Bore x Stroke: 84 x 90 mm
Compression Ratio: 8.5: 1
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Ignition / Starting: Electronic Ignition / Electric and Kick Start
Max Power: 27.2 hp @ 5250 rpm
Max Torque: 41.3 Nm @ 4000 rpm
Transmission / Drive: 5 Speed (left foot gear shift) / chain
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Rear Suspension: Swing Arm With Gas Shock Absorbers, Stroke 80 mm wheel travel
Front Brakes: Single 280mm disc
Rear Brakes: Foot operated, 153 mm drum
Front Tyre: 90/90 -19
Rear Tyre: 100/90 -19
Dimensions: Length 2160 mm / Width (Handle bars) 800 mm / Height: 1050 mm
Wheel base: 1370 mm
Seat Height: 800 mm
Wet Weight: 187 Kg
Fuel Capacity: 13.5 Litres / 3.2 gal

The post Royal Enfield Scrambler / Trails EFI (2009-12) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Fury EFI (2012) https://motorcyclespecifications.com/royal-enfield-fury-efi-2012-specs/ Mon, 27 Mar 2023 13:42:03 +0000 https://motorcyclespecifications.com/?p=33684 The Royal Enfield Fury EFI is a motorcycle with a single-cylinder, air-cooled engine with a displacement of 499cc. The engine has an electronic fuel injection system, produces 27.2 horsepower at

The post Royal Enfield Fury EFI (2012) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Fury EFI is a motorcycle with a single-cylinder, air-cooled engine with a displacement of 499cc. The engine has an electronic fuel injection system, produces 27.2 horsepower at 5200 rpm, and 30.5 pound-feet of torque at 4000 rpm. The bike has a wet, multiplate clutch and a 5-speed transmission. The suspension consists of telescopic forks at the front and a swingarm with gas shock absorbers at the rear. The bike has a front single 280mm disc brake and a 153mm drum brake at the rear, with a chain final drive. The bike weighs 187 kilograms and has a fuel capacity of 13.5 liters. It has a wheelbase of 1370mm and a seat height of 800mm. The design features a sleek, classic look with a one-into-one exhaust system. It has a 12V electrical system, and the headlamp and taillamp use 60/55W and 21/5W bulbs, respectively. This motorcycle is equipped with both an electric and kick starter, allowing for greater convenience in starting the bike.

Technical specifications:

Make Model: Royal Enfield Fury EFI

Year: 2012
Engine: Four Stroke, single Cylinder, OHV
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Engine Oil: 15W50 API, SL grade, JASO MA
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Exhaust: One-into-one
Ignition: Electronic Ignition Keihin
Starting: Electric & Kick
Max Power: 20.3 kW / 27.2 hp @ 5200 rpm
Max Torque: 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft @ 4000 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Rear Suspension: Swing Arm With Gas Shock Absorbers, Stroke 80 mm wheel travel
Front Brakes: Single 280mm disc
Rear Brakes: Foot operated, 153 mm drum
Front Tyre: 90/90 -18
Rear Tyre: 100/90 -18
Wheelbase: 1370 mm / 53.9 in
Seat Height: 800 mm / 31.5 in
Wet Weight: 187 kg / 412 lbs
Wet Weight: 187 Kg
Fuel Capacity: 13.5 Litres / US 3.2 gal

The post Royal Enfield Fury EFI (2012) appeared first on MotorcycleSpecifications.com.

]]> Rider Auto (1982) https://motorcyclespecifications.com/rider-auto-1982-specs-4/ Sun, 26 Mar 2023 19:37:55 +0000 https://motorcyclespecifications.com/?p=32661 The Rider Auto Glide Limited 1982 model was a motorcycle with a four stroke, 90 degree V-twin engine, and 2 valves per cylinder. It had a capacity of 44 ci

The post Rider Auto (1982) appeared first on MotorcycleSpecifications.com.

]]> The Rider Auto Glide Limited 1982 model was a motorcycle with a four stroke, 90 degree V-twin engine, and 2 valves per cylinder. It had a capacity of 44 ci / 738 cc and was air cooled with a compression ratio of 8.5:1. The motorcycle had an automatic CVT Type II transmission and a belt for final drive. It had a single disc 4 piston caliper for the front brakes and a single disc 1 piston caliper for the rear brakes. The front tyre was 21 inches / 53.3cm with 60 spokes, while the rear tyre was 16 inches / 40.6cm with 60 spokes. The seat height was 24.5 inches / 622 mm, and the dry weight was 460 lbs / 209 kg. The fuel capacity was 4.2 gallons / 15.9 litres. The motorcycle had a two-stage exhaust that was muffled and baffled. The starting mechanism was electric.

Technical specifications:

Make Model: Rider Auto Glide Limited

Engine: Four stroke, 90 degrees V-Twin, 2 valve per cylinder
Capacity: 44 ci / 738 cc
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Induction:
Starting: Electric
Exhaust: 2 Stage: Muffled, Baffled
Transmission: Automatic CVT Type II
Final Drive: Belt
Front Brakes: Single disc 4 piston caliper
Rear Brakes: Single disc 1 piston caliper
Front Tyre: 21″/53.3cm | 60 Spoke
Rear Tyre: 16″/40.6cm | 60 Spoke
Seat Height: 24.5 in / 622 mm
Dry Weight: 460 lbs. / 209 kg
Fuel Capacity: 4.2 gal / 15.9 Litres

The post Rider Auto (1982) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Bullet 500 Classic (1990) https://motorcyclespecifications.com/royal-enfield-bullet-500-classic-1990-specs/ Sun, 26 Mar 2023 18:54:03 +0000 https://motorcyclespecifications.com/?p=32621 The Royal Enfield Bullet 500 Classic is a motorcycle manufactured in 1990. It features a four-stroke, single-cylinder, OHV, 2 valve engine with a capacity of 499cc/30.4 cu-in. The engine is

The post Royal Enfield Bullet 500 Classic (1990) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Bullet 500 Classic is a motorcycle manufactured in 1990. It features a four-stroke, single-cylinder, OHV, 2 valve engine with a capacity of 499cc/30.4 cu-in. The engine is air-cooled, with a compression ratio of 8.5:1, carburetor induction and electronic ignition. This motorcycle has a unique 12V system with a headlamp of 60/55W and tail lamp of 21/5W. The max power the motorcycle can produce is 27.2 hp at 5250 rpm, with a max torque of 41.3 Nm / 30.4 lb-ft at 4000 rpm. The clutch is a multiplate with a 4-speed transmission that reaches a top speed of 128 km/h (79.5 mph). The front suspension is telescopic, hydraulic damping, stroke 130 mm wheel travel, while the rear suspension is a swing arm with gas shock absorbers, stroke 80 mm wheel travel. The braking system is a drum for the front and the rear. The motorcycle has a wheelbase of 1370 mm / 53.9 in, a seat height of 800 mm / 31.5 in, and a dry weight of 168.0 kg / 370.4 lbs. It also has a fuel capacity of 13.5 Litres / 3.2 US gal. This classic bullet model is still popular among motorcycle enthusiasts and collectors due to its simple mechanical design, reliability, and vintage appeal.

Technical specifications:

Make Model: Royal Enfield Bullet 500

Year: 1990
Engine: Four Stroke, single Cylinder, OHV, 2 valve
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Induction: Carburettor
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Ignition: Electronic Ignition
Starting: Kick
Max Power: 27.2 hp / @ 5250 rpm
Max Torque: 41.3 Nm / 30.4 lb-ft @ 4000 rpm
Clutch: Mulitiplate
Transmission: 4 Speed
Final Drive: Chain
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Rear Suspension: Swing Arm With Gas Shock Absorbers, Stroke 80 mm wheel travel
Front Brakes: Drum
Rear Brakes: Drum
Front Tyre: 90/90 -19
Rear Tyre: 100/90 -19
Wheel base: 1370 mm / 53.9 in
Seat Height: 800 mm / 31.5 in
Dry Weight: 168.0 kg / 370.4 lbs
Fuel Capacity: 13.5 Litres / 3.2 US gal

The post Royal Enfield Bullet 500 Classic (1990) appeared first on MotorcycleSpecifications.com.

]]> Rider Auto (1982) https://motorcyclespecifications.com/rider-auto-1982-specs-3/ Sun, 26 Mar 2023 16:12:01 +0000 https://motorcyclespecifications.com/?p=32466 The Rider Auto-Glide Sport was a motorcycle produced in 1982. It was powered by a four-stroke, 90-degree V-twin engine with a capacity of 44 ci/738cc and a compression ratio of

The post Rider Auto (1982) appeared first on MotorcycleSpecifications.com.

]]> The Rider Auto-Glide Sport was a motorcycle produced in 1982. It was powered by a four-stroke, 90-degree V-twin engine with a capacity of 44 ci/738cc and a compression ratio of 8.5:1. The cooling system was air-cooled and the induction was provided by an electric starter. The exhaust was two-staged, muffled and baffled. The transmission was an automatic CVT Type II and the final drive was belt-driven. The front brakes featured a single disc with a four-piston caliper, while the rear brake had a single disc with a one-piston caliper. The bike rode on a 21-inch front wheel with 60 spokes and a 16-inch rear wheel with 60 spokes. The seat height measured 24.5 inches and the dry weight was 460 pounds, while the fuel capacity was 4.2 gallons or 15.9 litres.

Technical specifications:

Make Model: Rider Auto-Glide Sport

Engine: Four stroke, 90 degrees V-Twin, 2 valve per cylinder
Capacity: 44 ci / 738 cc
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Induction:
Starting: Electric
Exhaust: 2 Stage: Muffled, Baffled
Transmission: Automatic CVT Type II
Final Drive: Belt
Front Brakes: Single disc 4 piston caliper
Rear Brakes: Single disc 1 piston caliper
Front Tyre: 21″/53.3cm | 60 Spoke
Rear Tyre: 16″/40.6cm | 60 Spoke
Seat Height: 24.5 in / 622 mm
Dry Weight: 460 lbs. / 209 kg
Fuel Capacity: 4.2 gal / 15.9 Litres

The post Rider Auto (1982) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Bullet 350 (2009-10) https://motorcyclespecifications.com/royal-enfield-bullet-350-2009-10-specs-2/ Sun, 26 Mar 2023 12:25:05 +0000 https://motorcyclespecifications.com/?p=32250 The Royal Enfield Bullet G5 Military EFI motorcycle was produced from 2009-2010. It features a four-stroke, single-cylinder, OHV engine with a capacity of 499cc and a compression ratio of 8.5:1.

The post Royal Enfield Bullet 350 (2009-10) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Bullet G5 Military EFI motorcycle was produced from 2009-2010. It features a four-stroke, single-cylinder, OHV engine with a capacity of 499cc and a compression ratio of 8.5:1. The engine is air-cooled and has a wet sump lubrication system, with recommended engine oil of 15W50 API, SL grade, JASO MA. The bike also has electronic fuel injection (EFI) for induction and an electronic ignition Keihin for ignition. Both electric and kick starting are available. Maximum power is 20.3 kW / 27.2 hp at 5200 rpm, and maximum torque is 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft at 4000 rpm. The bike has a wet, multiplate clutch, a 5-speed constant mesh transmission, and a chain final drive. The frame is a single downtube, with the engine acting as a stress member. The front suspension is telescopic with hydraulic damping, and the rear suspension is a swing arm with gas shock absorbers. The front brakes are a single 280mm disc, while the rear brakes are foot-operated and have a 153mm drum. The bike has a wheelbase of 1370mm / 53.9in, a seat height of 800mm / 31.5in, and a dry weight of 168.0kg / 370.4lbs. Fuel capacity is 13.5 litres / 3.2 US gallons. The Royal Enfield Bullet G5 Military EFI motorcycle measures 2160mm / 85.0in in length, 800mm / 31.5in in width, and 1050mm in height.

Technical specifications:

Make Model: Royal Enfield Bullet G5 Military EFI

Year: 2009 – 10
Engine: Four Stroke, single Cylinder, OHV
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Engine Oil: 15W50 API, SL grade, JASO MA
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Exhaust: One-into-one
Ignition: Electronic Ignition Keihin
Starting: Electric & Kick
Max Power: 20.3 kW / 27.2 hp @ 5200 rpm
Max Torque: 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft @ 4000 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Frame: Single downtube, engine used as stress member
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Rear Suspension: Swing Arm With Gas Shock Absorbers, Stroke 80 mm wheel travel
Front Brakes: Single 280mm disc
Rear Brakes: Foot operated, 153 mm drum
Front Tyre: 90/90 -19
Rear Tyre: 100/90 -19
Dimensions: Length 2160 mm / 85.0 in Width 800 mm / 31.5 in Height 1050 mm /
Wheel base: 1370 mm / 53.9 in
Seat Height: 800 mm / 31.5 in
Dry Weight: 168.0 kg / 370.4 lbs
Fuel Capacity: 13.5 Litres / 3.2 US gal

The post Royal Enfield Bullet 350 (2009-10) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Bullet 350 (2011-12) https://motorcyclespecifications.com/royal-enfield-bullet-350-2011-12-specs/ Sun, 26 Mar 2023 01:10:14 +0000 https://motorcyclespecifications.com/?p=31606 The Royal Enfield Bullet Trails EFI of 2011-12 is an air-cooled, single cylinder, OHV motorcycle with a 499cc capacity, Electronic Fuel Injection (EFI), and 12V electrical system. It has a

The post Royal Enfield Bullet 350 (2011-12) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Bullet Trails EFI of 2011-12 is an air-cooled, single cylinder, OHV motorcycle with a 499cc capacity, Electronic Fuel Injection (EFI), and 12V electrical system. It has a maximum power of 27.2 hp at 5250 rpm and maximum torque of 41.3 Nm at 4000 rpm, with a 5-speed (left foot gear shift) transmission and chain drive. The front suspension is telescopic with hydraulic damping and 130 mm wheel travel, while the rear suspension is swing arm with gas shock absorbers and 80 mm wheel travel. It has a single 280mm disc front brake and a foot-operated, 153 mm drum rear brake, and 90/90-19 and 100/90-19 front and rear tyres respectively. The motorcycle has a length of 2160 mm, a width (handlebars) of 800 mm, and a height of 1050 mm, with a wheelbase of 1370 mm and a seat height of 800 mm. Its wet weight is 187 kg, and it has a fuel capacity of 13.5 litres (3.2 gal).

Technical specifications:

Make Model: Royal Enfield Bullet Trails EFI

Year: 2011-12
Engine: Air Cooled, four Stroke, single Cylinder, OHV,
Capacity: 499
Bore x Stroke: 84 x 90 mm
Compression Ratio: 8.5: 1
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Ignition / Starting: Electronic Ignition / Electric and Kick Start
Max Power: 27.2 hp @ 5250 rpm
Max Torque: 41.3 Nm @ 4000 rpm
Transmission / Drive: 5 Speed (left foot gear shift) / chain
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Rear Suspension: Swing Arm With Gas Shock Absorbers, Stroke 80 mm wheel travel
Front Brakes: Single 280mm disc
Rear Brakes: Foot operated, 153 mm drum
Front Tyre: 90/90 -19
Rear Tyre: 100/90 -19
Dimensions: Length 2160 mm / Width (Handle bars) 800 mm / Height: 1050 mm
Wheel base: 1370 mm
Seat Height: 800 mm
Wet Weight: 187 Kg
Fuel Capacity: 13.5 Litres / 3.2 gal

The post Royal Enfield Bullet 350 (2011-12) appeared first on MotorcycleSpecifications.com.

]]> Royal Enfield Bullet 500 EFI (2015-16) https://motorcyclespecifications.com/royal-enfield-bullet-500-efi-2015-16-specs/ Sat, 25 Mar 2023 18:29:17 +0000 https://motorcyclespecifications.com/?p=31230 The Royal Enfield Bullet Classic 500 motorcycle was manufactured between 2015 and 2016. It has a four-stroke, single-cylinder, OHV engine with a capacity of 499cc. The bore x stroke measures

The post Royal Enfield Bullet 500 EFI (2015-16) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Bullet Classic 500 motorcycle was manufactured between 2015 and 2016. It has a four-stroke, single-cylinder, OHV engine with a capacity of 499cc. The bore x stroke measures 84mm x 90mm, and the compression ratio is 8.5:1. The motorcycle uses an air-cooled cooling system and wet sump lubrication. It runs on electronic fuel injection (EFI) with a 12V system, featuring a headlamp of 60/55W and a tail lamp of 21/5W. The motorcycle has a one-into-one exhaust and an electronic ignition system by Keihin. It starts using both electric and kick mechanisms. The maximum power of the motorcycle is 20.3 kW / 27.2 hp at 5200 rpm, and the maximum torque is 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft at 4000 rpm.

The motorcycle uses a wet, multiplate clutch system and has five-speed constant mesh transmission. Its final drive is a chain, and the frame is a single downtube using the engine as a stress member. The motorcycle has telescopic hydraulic damping front suspension with 130mm wheel travel and twin shocks gas-charged five-step adjustable preload rear suspension with 80mm wheel travel. The front brakes consist of a single 280mm disc with two-piston caliper, while the rear brakes are drum style, 152mm, single leading shoe, internal expanding. It uses alloy laced wire spoke wheels, with the front rim measuring 3.25 x 19 and the rear rim measuring 3.50 x 19. The front tire is 90/90-19.

The motorcycle has a length of 2180mm, a width of 800mm, and a height of 1080mm. Its wheelbase is 1370mm, with a ground clearance of 135mm and a seat height of 800mm. The wet weight of the motorcycle is 187kg, and its fuel capacity is 14.5 liters/3.8 US gallons.

Technical specifications:

Make Model: Royal Enfield Bullet Classic 500

Year: 2015 – 16
Engine: Four Stroke, single Cylinder, OHV
Capacity: 499 cc / 30.4 cu-in
Bore x Stroke: 84 x 90 mm
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Engine Oil: 15W50 API, SL grade, JASO MA
Induction: Electronic Fuel Injection (EFI)
Electrical: 12V System; Headlamp 60/55W; Tail lamp 21/5W
Exhaust: One-into-one
Ignition: Electronic Ignition Keihin
Starting: Electric & Kick
Max Power: 20.3 kW / 27.2 hp @ 5200 rpm
Max Torque: 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft @ 4000 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Frame: Single downtube, engine used as stress member
Front Suspension: Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel
Front Wheel Travel: 130 mm / 5.1 in
Rear Suspension: Twin shocks, gas charged with 5-step adjustable preload
Rear Wheel Travel: 80 mm / 3.1 in
Front Brakes: Single 280mm disc, 2 piston caliper
Rear Brakes: Drum, 152 mm, single leading shoe internal expanding
Wheels: Alloy, laced wire spokes
Front Rim: 3.25 x 19
Rear Rim: 3.50 x 19
Front Tyre: 90/90-19
Dimensions: Length: 2180 mm / 85.8 in Width: 800 mm / 31.5 in Height: 1080 mm / 42.5 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 135 mm / 5.3 in
Seat Height: 800 mm / 31.5 in
Wet Weight: 187 kg / 412 lbs
Fuel Capacity: 14.5 Litres / 3.8 US gal

The post Royal Enfield Bullet 500 EFI (2015-16) appeared first on MotorcycleSpecifications.com.

]]> Rider Auto (1982) https://motorcyclespecifications.com/rider-auto-1982-specs-2/ Sat, 25 Mar 2023 17:13:16 +0000 https://motorcyclespecifications.com/?p=31160 The Rider Auto Glide Trike motorcycle was introduced in 1982. It featured a four-stroke, 90 degree V-Twin engine with a capacity of 44 ci/738 cc and was air-cooled with a

The post Rider Auto (1982) appeared first on MotorcycleSpecifications.com.

]]> The Rider Auto Glide Trike motorcycle was introduced in 1982. It featured a four-stroke, 90 degree V-Twin engine with a capacity of 44 ci/738 cc and was air-cooled with a compression ratio of 8.5:1. The motorcycle was equipped with an automatic CVT Type II transmission and a belt final drive. It had a front brake with a single disc and four-piston caliper, and a rear brake with a single disc and one piston caliper. The front tyre was 21″ with 60 spokes, while the rear tyre was 16″ with 60 spokes. The seat height was 24.5 inches, and the bike weighed 460 pounds with a fuel capacity of 4.2 gallons. The exhaust system was two-stage with a muffled and baffled design. Additionally, it was initiated with electric ignition.

Technical specifications:

Make Model: Rider Auto Glide Trike

Engine: Four stroke, 90 degrees V-Twin, 2 valve per cylinder
Capacity: 44 ci / 738 cc
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Induction:
Starting: Electric
Exhaust: 2 Stage: Muffled, Baffled
Transmission: Automatic CVT Type II
Final Drive: Belt
Front Brakes: Single disc 4 piston caliper
Rear Brakes: Single disc 1 piston caliper
Front Tyre: 21″/53.3cm | 60 Spoke
Rear Tyre: 16″/40.6cm | 60 Spoke
Seat Height: 24.5 in / 622 mm
Dry Weight: 460 lbs. / 209 kg
Fuel Capacity: 4.2 gal / 15.9 Litres

The post Rider Auto (1982) appeared first on MotorcycleSpecifications.com.

]]> Rickman Honda 750 RC (1975) https://motorcyclespecifications.com/rickman-honda-750-rc-1975-specs/ Sat, 25 Mar 2023 16:54:04 +0000 https://motorcyclespecifications.com/?p=31142 The Rickman Honda 750 RC was a motorcycle produced in 1975. It had a four-stroke, transverse four-cylinder engine with a capacity of 736 cc and a compression ratio of 9.2:1.

The post Rickman Honda 750 RC (1975) appeared first on MotorcycleSpecifications.com.

]]> The Rickman Honda 750 RC was a motorcycle produced in 1975. It had a four-stroke, transverse four-cylinder engine with a capacity of 736 cc and a compression ratio of 9.2:1. The cooling system was air-cooled and the bike used four 28mm Mikuni carbs for induction. The ignition was battery induction coil and the bike had an electric starter. The maximum power output was 69 hp at 8000 rpm. The bike had a five-speed transmission and a chain final drive. The front suspension was a telehydraulic fork and the rear suspension was a swingarm with dual shocks. The front brakes consisted of two 296mm discs and the rear brake was a single 285mm disc. The front tyre was 4.10-18 and the rear tyre was 4.85-18. The dry weight of the bike was 218 kg.

Technical specifications:

Make Model: Rickman Honda 750 RC

Year: 1975
Engine: Four stroke, transverse four cylinder, SOHC, 2 valve per cylinder
Capacity: 736 cc / 44.9 cu-in
Bore x Stroke: 61 63 mm
Compression Ratio: 9.2:1
Cooling System: Air cooled,
Induction: 4x 28mm Mikuni carbs.
Ignition: Battery induction coil
Starting: Electric
Max Power: 69 hp @ 8000 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Telehydraulic forks
Rear Suspension: Swingarm with dual shocks.
Front Brakes: 2x 296mm disc
Rear Brakes: Single 285mm disc
Front Tyre: 4.10-18
Rear Tyre: 4.85-18
Dry Weight: 218 kg

The post Rickman Honda 750 RC (1975) appeared first on MotorcycleSpecifications.com.

]]> Rider Auto (1982) https://motorcyclespecifications.com/rider-auto-1982-specs/ Sat, 25 Mar 2023 12:19:57 +0000 https://motorcyclespecifications.com/?p=30876 The Rider Auto Glide Standard motorcycle, manufactured in 1982, is powered by a four stroke, 90-degree V-twin engine with a capacity of 44 ci / 738 cc. It has an

The post Rider Auto (1982) appeared first on MotorcycleSpecifications.com.

]]> The Rider Auto Glide Standard motorcycle, manufactured in 1982, is powered by a four stroke, 90-degree V-twin engine with a capacity of 44 ci / 738 cc. It has an air-cooled cooling system with a compression ratio of 8.5:1 and an automatic CVT Type II transmission. The motorcycle has a belt final drive and features a single-disc, four-piston caliper for the front brakes and a single-disc, one-piston caliper for the rear. The Rider Auto Glide Standard has 21-inch/53.3cm, 60-spoke front, and 16-inch/40.6cm, 60-spoke rear tyres. The seat height is 24.5 inches/622mm, and the dry weight is 460 lbs./209 kg. The motorcycle tank holds 4.2 gallons/15.9 litres of fuel.

Technical specifications:

Make Model: Rider Auto Glide Standard

Engine: Four stroke, 90 degrees V-Twin, 2 valve per cylinder
Capacity: 44 ci / 738 cc
Cooling System: Air Cooled
Compression Ratio: 8.5:1
Induction:
Starting: Electric
Exhaust: 2 Stage: Muffled, Baffled
Transmission: Automatic CVT Type II
Final Drive: Belt
Front Brakes: Single disc 4 piston caliper
Rear Brakes: Single disc 1 piston caliper
Front Tyre: 21″/53.3cm | 60 Spoke
Rear Tyre: 16″/40.6cm | 60 Spoke
Seat Height: 24.5 in / 622 mm
Dry Weight: 460 lbs. / 209 kg
Fuel Capacity: 4.2 gal / 15.9 Litres

The post Rider Auto (1982) appeared first on MotorcycleSpecifications.com.

]]> Royal Enflield Continental 535 (2016) https://motorcyclespecifications.com/royal-enflield-continental-535-2016-specs/ Sat, 25 Mar 2023 04:54:03 +0000 https://motorcyclespecifications.com/?p=30460 The Royal Enfield Continental GT 535 is a motorcycle introduced in 2016. It has a four-stroke, single-cylinder, twin-spark engine with a capacity of 535 cc and a cooling system that

The post Royal Enflield Continental 535 (2016) appeared first on MotorcycleSpecifications.com.

]]> The Royal Enfield Continental GT 535 is a motorcycle introduced in 2016. It has a four-stroke, single-cylinder, twin-spark engine with a capacity of 535 cc and a cooling system that relies on air. The compression ratio is 8.5:1, and the lubrication system is a wet sump. It has electronic fuel injection (EFI) and a Keihin induction system, with a digital electronic ignition that is started with both electric and kick.

The maximum power from the engine is 21.4 kW at 5100 rpm, and the maximum torque is 44 Nm at 4000 rpm. The clutch is a wet, multiplate type, and the transmission is a 5-speed constant mesh. It has a chain final drive.

The frame has a twin downtube design, while the front suspension is a telescopic fork with a 41 mm diameter. The rear suspension is a twin shock, Paioli gas-charged shock absorber that is adjustable for preload. The front brake is a single floating disc with a 2-piston floating caliper, and the rear brake is a single disc with a single floating caliper. The wheels are alloy, with laced wire spokes, with a front tire size of 90/90-19 and a rear tire size of 120/80-18.

The dimensions of the motorcycle are a length of 2180 mm, a width of 800 mm, and a height of 1080 mm. The wheelbase is 1370 mm, and the seat height is 800 mm. The wet weight of the motorcycle is 187 kg, and it has a fuel capacity of 14.5 L.

Technical specifications:

Make Model: Royal Enfield Continental GT 535

Year: 2016 –
Engine: Four stroke, single cylinder, twinspark
Capacity: 535 cc / 32.6 cu in
Bore x Stroke: 87 x 90 mm
Cooling System: Air cooled
Compression Ratio: 8.5:1
Lubrication: Wet sump
Engine Oil: 15W50 API, SL grade JASO MA
Exhaust: One-into-one, chrome
Induction: EFI, Keihin
Ignition: Digital electronic ignition
Battery: 12V, 14Ah
Starting: Electric and kick
Max Power: 21.4 kW / 29.1 hp @ 5100 rpm
Max Torque: 44 Nm / 4.5 kgf-m / 32.5 lb-ft @ 4000 rpm
Clutch: Wet, multiplate
Transmission: 5 Speed, constant mesh
Final Drive: Chain
Frame: Twin downtube
Front Suspension: Telescopic fork, 41 mm
Front Wheel Travel: 110 mm / 4.3 in
Rear Suspension: Twin shock, Paioli, gas charges with adjustable preload
Rear Wheel Travel: 80 mm / 3.1 in
Front Brakes: Single floating disc, 300 mm, 2 piston floating caliper
Rear Brakes: Single disc, 240 mm / single floating caliper
Wheels: Alloy, laced wire spokes
Front Tyre: 90/90-19
Rear Tyre: 120/80-18
Dimensions: Length: 2180 mm / 85.8 in Width: 800 mm / 31.5 in Height: 1080 mm / 42.5 in
Wheelbase: 1370 mm / 53.9 in
Seat Height: 800 mm / 31.5 in
Wet Weight: 187 kg / 412 lbs
Fuel Capacity: 14.5 L / 3.8 US gal

The post Royal Enflield Continental 535 (2016) appeared first on MotorcycleSpecifications.com.

]]> Rickman Interceptor (1970) https://motorcyclespecifications.com/rickman-interceptor-1970-specs/ Sat, 25 Mar 2023 01:54:55 +0000 https://motorcyclespecifications.com/?p=30294 The Rickman Interceptor, produced in 1970, was a motorcycle with a four stroke, parallel twin engine and a capacity of 736. The bore and stroke measured 71 x 93 mm

The post Rickman Interceptor (1970) appeared first on MotorcycleSpecifications.com.

]]> The Rickman Interceptor, produced in 1970, was a motorcycle with a four stroke, parallel twin engine and a capacity of 736. The bore and stroke measured 71 x 93 mm while it was air cooled and used induction. The bike had an electric starting system and could reach a maximum power of 56 hp at 6750 rpm with a 4-speed transmission and a chain for final drive. The front suspension used telescopic forks while the rear suspension used dual shocks. For braking, the Rickman Interceptor used disc brakes at both the front and rear, and its dry weight was 160 kg.

Technical specifications:

Make Model: Rickman Interceptor

Year: 1970
Engine: Four stroke, parallel twin
Capacity: 736
Bore x Stroke: 71 x 93 mm
Cooling System: Air cooled
Induction:
Starting: Electric
Max Power: 56 hp @ 6750 rpm
Transmission: 4 Speed
Final Drive: Chain
Front Suspension: Telescopic forks
Rear Suspension: Dual shocks
Front Brakes: Disc
Rear Brakes: Disc
Dry-Weight: 160 kg

The post Rickman Interceptor (1970) appeared first on MotorcycleSpecifications.com.

]]>