Beta Archives - MotorcycleSpecifications.com https://motorcyclespecifications.com/category/beta/ Find your motorcycle specifications Fri, 07 Apr 2023 22:34:47 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.4 Beta RR 450 Enduro (2005-06) https://motorcyclespecifications.com/beta-rr-450-enduro-2005-06-specs/ Tue, 04 Apr 2023 12:19:02 +0000 https://motorcyclespecifications.com/?p=44315 The Beta RR 450 Enduro motorcycle was produced in the years 2005 and 2006. It has a four-stroke, single-cylinder engine with 448cc capacity and a compression ratio of 11.0:1. The

The post Beta RR 450 Enduro (2005-06) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 450 Enduro motorcycle was produced in the years 2005 and 2006. It has a four-stroke, single-cylinder engine with 448cc capacity and a compression ratio of 11.0:1. The cooling system is liquid-cooled and lubrication is forced with two oil pumps. The ignition is DC-CDI without a trembler and has variable ignition timing of the Kokusan type. Starting is by kick and it has a six-speed transmission with a final chain drive. The frame is made of molybdenum steel and has a double cradle split above the exhaust port. The front suspension is a hydraulic USD fork of 45mm and has a front wheel travel of 290mm, while the rear suspension is a monoshock with progressive compound lever and has a rear wheel travel of 300mm. The front brakes have a single 255mm disc with a 2 piston caliper, and the rear brakes have a single 240mm disc with a 1 piston caliper. The front wheel size is 1.60 x 21 with a 90/90-21 front tire size, while the rear wheel size is 2.15 x 18 with a 140/80-18 rear tire size. The seat height is 940mm and has a ground clearance of 320mm. It has a dry weight of 117kg and a fuel capacity of 8.5L.

Technical specifications:

Make Model: Beta RR 450 Enduro

Year: 2005 – 06
Engine: Four stroke, single cylinder, DOHC, 4 valves
Capacity: 448 cc / 27.3 cu in
Bore x Stroke: 89 x 72 mm
Compression Ratio: 11.0:1
Cooling System: Liquid cooled
Lubrication System: Forced, 2 oil pumps
Induction: Keihin FCR-MX 39
Ignition: DC-CDI without trembler with variable ignition timing, Kokusan type
Starting: Kick
Transmission: 6 Speed
Final Drive: Chain
Frame: Molybdenum steel with double cradle split above the exhaust port
Front Suspension: Hydraulic USD fork, 45mm
Front Wheel Travel: 290 mm / 11.2 in
Rear Suspension: Monoshock with progressive compound lever
Rear Wheel Travel: 300 mm / 11.8 in
Front Brakes: Single 255mm disc, 2 piston caliper
Rear Brakes: Single 240 mm disc, 1 piston caliper
Front Wheel: 1.60 x 21
Front Tyre: 90/90 – 21
Rear Wheel: 2.15 x 18
Rear Tyre: 140/80 – 18
Seat Height: 940 mm / 37 in
Ground Clearance: 320 mm / 12.6 in
Dry Weight: 117 kg / 258 lbs
Fuel Capacity: 8.5 L / 2.2 US gal

The post Beta RR 450 Enduro (2005-06) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 4T 390 Enduro (2015) https://motorcyclespecifications.com/beta-rr-4t-390-enduro-2015-specs/ Tue, 04 Apr 2023 12:03:22 +0000 https://motorcyclespecifications.com/?p=44301 The Beta RR 4T 390 Enduro is a dirt bike made in 2015, featuring a single-cylinder four-stroke engine, with a total capacity of 385.6cc. The compression ratio of the bike

The post Beta RR 4T 390 Enduro (2015) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 4T 390 Enduro is a dirt bike made in 2015, featuring a single-cylinder four-stroke engine, with a total capacity of 385.6cc. The compression ratio of the bike is 12.5:1, and it uses forced lubrication with two oil pumps. The cooling system is liquid-based and forced by a pump. The ignition system of the bike is based on AC-CDI, Kokusan, and it uses a NGK LKAR 8A-9 spark plug. The bike can be started with both electric and kick start, and it uses a wet multi-disc clutch, with a 6-speed transmission, and a chain-based final drive. The motorcycle features a molybdenum steel frame with double cradle split, with air filter access from the side. The front suspension includes a 48mm Sachs USD fork, while the rear suspension features a Sachs shock with adjustable rebound and hi/low-speed suspension. The front brakes have a single wave 260mm floating disc with a 2-piston floating caliper, while the rear brakes have a single 240mm disc with a 1-piston floating caliper. The wheels are 1.60 x 21 for the front and 2.15 x 18 for the rear, with 90/90-21 and 140/80-18 tires, respectively. The bike has a length of 2180mm, a width of 807mm, and a height of 1270mm. The wheelbase is 1490mm, and the seat height is 940mm. The dry weight of the motorcycle is 112kg, with a fuel capacity of 8.0L, including a fuel reserve of 1.3L.

Technical specifications:

Make Model: Beta RR 4T 390 Enduro

Year: 2015
Engine: Four stroke, single cylinder with countershaft, DOHC, 4 valve
Capacity: 385.6 cc / 23.5 cu in
Bore x Stroke: 88 x 63.4 mm
Compression Ratio: 12.5:1
Lubrication: Forced, 2 oil pumps
Cooling System: Liquid cooled, forced by pump
Induction: Keihin FCR-MX39
Ignition: AC-CDI, Kokusan
Spark Plug: NGK LKAR 8A-9
Starting: Electric and kick
Clutch: Wet multi-disc
Transmission: 6 Speed
Final Drive: Chain
Primary Drive: 28:76
Frame: Molybdenum steel with double cradle split above exhaust port. Air filter access from the side
Front Suspension: 48 mm Sachs USD fork, adjustable compression and rebound, TFX technology
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Sachs shock w/adjustable rebound and hi/low speed compression
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single wave 260 mm floating disc, 2 piston floating caliper
Rear Brakes: Single 240 mm disc, 1 piston floating caliper
Front Wheel: 1.60 x 21
Rear Wheel: 2.15 x 18
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Dimensions: Length: 2180 mm / 85.8 in Width: 807 mm / 31.8 in Height: 1270 mm / 50.0 in
Wheelbase: 1490 mm / 58.7 in
Seat Height: 940 mm / 37.0
Ground Clearance: 320 mm / 12.6 in
Footrest Height: 413 mm / 16.3 in
Dry Weight: 112 kg / 247 lb
Fuel Capacity: 8.0 L / 2.1 US gal
Fuel Reserve: 1.3 L / 0.3 US gal

The post Beta RR 4T 390 Enduro (2015) appeared first on MotorcycleSpecifications.com.

]]> Beta Alp 200 4T (2006-07) https://motorcyclespecifications.com/beta-alp-200-4t-2006-07-specs/ Mon, 03 Apr 2023 15:37:58 +0000 https://motorcyclespecifications.com/?p=43165 The Beta Alp 125 4T motorcycle was produced from 2006 to 2007. It has a four-stroke, single-cylinder, SOHC engine with a capacity of 124cc and a compression ratio of 10.0:1.

The post Beta Alp 200 4T (2006-07) appeared first on MotorcycleSpecifications.com.

]]> The Beta Alp 125 4T motorcycle was produced from 2006 to 2007. It has a four-stroke, single-cylinder, SOHC engine with a capacity of 124cc and a compression ratio of 10.0:1. The bike is air-cooled and uses a Mikuni UCAL 26mm induction system with electronic ignition. The transmission is a 5-speed with a chain final drive. The front suspension features hydraulic forks with 38mm travel, while the rear suspension is a single shock with adjustable spring preload and 180mm travel. The bike has front and rear disc brakes and comes with a 1.85 x 21 front wheel and 2.50 x 18 rear wheel with 90/90-21 and 120/80-18 tires respectively. The dimensions of the bike are 2150mm in length, 820mm in width, and 1150mm in height, with a ground clearance of 298mm and a seat height of 850mm. The dry weight of the bike is 101kg with a fuel capacity of 6.8L and a fuel reserve of 1.5L. The bike is capable of both electric and kick starting.

Technical specifications:

Make Model: Beta Alp 125 4T

Year: 2006 – 07
Engine: Four stroke, single cylinder, SOHC, 2 valves per cylinder
Capacity: 124 cc / 7.6 cu in
Bore x Stroke: 54 x 54 mm
Compression Ratio: 10.0:1
Cooling System: Air cooled
Induction: Mikuni UCAL, 26 mm
Ignition: Electronic
Starting: Electric & kick
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Hydraulic forks, 38 mm
Front Wheel Travel: 170 mm / 6.7 in
Rear Suspension: Single shock adjustable spring preload
Rear Wheel Travel: 180 mm / 7.1 in
Front Brakes: Single 245 mm disc, 2-piston caliper
Rear Brakes: Single 220 mm disc, 1-piston caliper
Front Wheel: 1.85 x 21
Rear Wheel: 2.50 x 18
Front Tyre: 90/90-21
Rear Tyre: 120/80-18
Dimensions: Length: 2150 mm / 84.6 in Width: 820 mm / 32.3 in Height: 1150 mm / 45.3 in
Ground Clearance: 298 mm / 11.7 in
Seat Height: 850 mm / 33.5 in
Dry Weight: 101 kg / 223 lbs
Fuel Capacity: 6.8 L / 1.8 US gal
Fuel Reserve: 1.5 L / 0.40 US gal

The post Beta Alp 200 4T (2006-07) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 4T 350 Enduro (2015) https://motorcyclespecifications.com/beta-rr-4t-350-enduro-2015-specs/ Mon, 03 Apr 2023 15:13:05 +0000 https://motorcyclespecifications.com/?p=43142 The Beta RR 4T 350 Enduro motorcycle from 2015 has a four-stroke, single-cylinder engine with a capacity of 349 cc and a compression ratio of 13.2:1. It has electric and

The post Beta RR 4T 350 Enduro (2015) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 4T 350 Enduro motorcycle from 2015 has a four-stroke, single-cylinder engine with a capacity of 349 cc and a compression ratio of 13.2:1. It has electric and kick starting, a wet multi-disc clutch, and a six-speed transmission with chain final drive. The frame is made of molybdenum steel with a double cradle split above the exhaust port, and air filter access is from the side. The front suspension is a 48mm Sachs USD fork with adjustable compression and rebound, while the rear suspension is a Sachs shock with adjustable rebound and hi/low speed compression. Front and rear wheel travel is 290 mm. The front brake features a single wave 260 mm floating disc with a two-piston floating caliper, and the rear brake has a single 240 mm disc with a one-piston floating caliper. The front wheel is 1.60 x 21, and the rear is 2.15 x 18, with front and rear tires of 90/90 -21 and 140/80 -18, respectively. The motorcycle is 2180 mm long, 807 mm wide, and 1270 mm high, with a wheelbase of 1490 mm, seat height of 940 mm, and ground clearance of 320 mm. The dry weight is 114 kg, and fuel capacity is 8.4 L with a fuel reserve of 1.5 L.

Technical specifications:

Make Model: Beta RR 4T 350 Enduro

Year: 2015
Engine: Four stroke, single cylinder with countershaft, DOHC
Capacity: 349 cc / 21.3 cu in
Bore x Stroke: 88 x 57.4 mm
Compression Ratio: 13.2:1
Lubrication: Forced, 2 oil pumps
Cooling System: Liquid cooled, forced by pump
Induction: Fuel injection
Ignition: DC-CDI with variable ignition timing, Kokusan
Spark Plug: NGK LKAR 8A-9
Starting: Electric and kick
Clutch: Wet multi-disc
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 12:31 / 2nd 15:28 / 3rd 19:28 / 4th 20:24 / 5th 27:27 / 6th 28:24
Primary Drive: 28:76
Frame: Molybdenum steel with double cradle split above exhaust port. Air filter access from the side
Front Suspension: 48 mm Sachs USD fork, adjustable compression and rebound, TFX technology, 11.4 in wheel travel.
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Sachs shock w/adjustable rebound and hi/low speed compression
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single wave 260 mm floating disc, 2 piston floating caliper
Rear Brakes: Single 240 mm disc, 1 piston floating caliper
Front Wheel: 1.60 x 21
Rear Wheel: 2.15 x 18
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Dimensions: Length: 2180 mm / 85.8 in Width: 807 mm / 31.8 in Height: 1270 mm / 50.0 in
Wheelbase: 1490 mm / 58.7 in
Seat Height: 940 mm / 37.0
Ground Clearance: 320 mm / 12.6 in
Footrest Height: 413 mm / 16.3 in
Dry Weight: 114 kg / 251 lb
Fuel Capacity: 8.4 L / 2.2 US gal
Fuel Reserve: 1.5 L / 0.4 US gal

The post Beta RR 4T 350 Enduro (2015) appeared first on MotorcycleSpecifications.com.

]]> Beta RR125 (2005-06) https://motorcyclespecifications.com/beta-rr125-2005-06-specs/ Mon, 03 Apr 2023 13:05:05 +0000 https://motorcyclespecifications.com/?p=43020 The Beta RR125 Enduro motorcycle was produced from 2005-06 and is powered by an air-cooled, single-cylinder, four-stroke 123cc engine with a compression ratio of 10.0:1. The engine is lubricated with

The post Beta RR125 (2005-06) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR125 Enduro motorcycle was produced from 2005-06 and is powered by an air-cooled, single-cylinder, four-stroke 123cc engine with a compression ratio of 10.0:1. The engine is lubricated with forced oil and a Mikuni 5NH1 carburetor handles induction. The bike can be started with either an electric or kick starter and has a wet, multi-plate clutch and a 5-speed transmission. The bike has a chain final drive and a steel double cradle frame. The suspension consists of hydraulic forks in the front and a single shock adjustable spring preload in the rear. The wheels are sized 1.6 x 21 in the front and 1.85 x 18 in the rear with 90/90-21 and 120/80-18 tires, respectively. The bike is 2070 mm long, 820 mm wide, and 1200 mm tall, with a wheelbase of 1370 mm and a ground clearance of 292 mm. The seat height is 922 mm, and the dry weight is 102 kg. The fuel tank capacity is 6.7 L, with an additional 1.0 L in reserve. The bike comes in red, white, and black and has a top speed of 95.2 km/h or 59 mph, with a standing 1/4 mile time of 12.7 sec.

Technical specifications:

Make Model: Beta RR 125 Enduro

Year: 2005 – 06
Engine: Air cooled, four stroke, single cylinder,
Capacity: 123 cc / 7.5 cu in
Bore x Stroke: 54 x 54 mm
Compression Ratio: 10.0:1
Lubrication: Forced, with pump
Engine Oil: SAE 15W/50
Cooling System: Air cooled
Induction: Mikuni 5NH1 carburetor
Ignition: Moryama 5HH
Spark Plub: R NGK CR7 HSA
Starting: Electric & kick
Clutch: Wet, multiplate
Transmission: 5 Speed
Final Drive: Chain
Frame: Steel, double cradle
Front Suspension: Hydraulic forks, 41mm
Front Wheel Travel: 245 mm / 9.6 in
Rear Suspension: Single shock adjustable spring preload
Rear Wheel Travel: 220 mm / 8.7 in
Front Brakes: Single 260 mm disc
Rear Brakes: Single 220 mm disc
Front Wheel: 1.6 x 21
Rear Wheel: 1.85 x 18
Front Tyre: 90/90-21
Rear Tyre: 120/80-18
Dimensions: Length: 2070 mm / 81.5 in Width: 820 mm / 32.3 in Height: 1200 mm / 47.2 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 292 mm / 11.5 in
Seat Height: 922 mm / 36.3 in
Dry Weight: 102 kg / 225 lbs
Wet Weight: 110 kg / 243 lbs
Fuel Capacity: 6.7 L / 1.8 US gal
Fuel Reserve: 1.0 L / 0.3 US gal
Standing 1/4 Mile: 12.7 sec
Top Speed: 95.2 km/h / 59 mph
Colours: Red, White, Black

The post Beta RR125 (2005-06) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 400 Enduro (2012) https://motorcyclespecifications.com/beta-rr-400-enduro-2012-specs-4/ Mon, 03 Apr 2023 10:52:02 +0000 https://motorcyclespecifications.com/?p=42898 The Beta RR 400 Enduro motorcycle was released in 2012 and has a four-stroke, single-cylinder, 4-valve engine with a capacity of 497.4cc. It has a compression ratio of 12.1:1 and

The post Beta RR 400 Enduro (2012) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 400 Enduro motorcycle was released in 2012 and has a four-stroke, single-cylinder, 4-valve engine with a capacity of 497.4cc. It has a compression ratio of 12.1:1 and is liquid-cooled. The induction is a Keihin FCR-MX 39mm, and the lubrication uses twin oil pumps with a cartridge oil filter. The motorcycle has a DC-CDI with variable ignition timing and both electric and kick starting options. The clutch is a wet multi-disc, and the gearbox oil capacity is 0.8L. It has six gears and a final drive using an O-ring chain by DID. The frame is made of molybdenum steel with a double cradle that splits above the exhaust port, and the air filter access is from the side. The front suspension is a Sachs USD fork, 48mm with adjustable compression and rebound using TFX technology. The front wheel travel is 290mm, and the rear suspension is a Sachs shock with adjustable rebound and hi/low speed compression, with a rear wheel travel of 290mm. The front brakes use a single 260mm floating disc with a 2-piston caliper by Nissen, while the rear brakes use a single 240mm disc with a 1-piston caliper, also by Nissen. The front tire is a 90/90-21, and the rear is a 140/80-18. The wheelbase is 1475mm, and the ground clearance is 320mm. The seat height is 934.7mm, and the dry weight is 108kg. The fuel capacity is 7.9L or 2.1 US gallons. The motorcycle was reviewed by Cycle News.

Technical specifications:

Make Model: Beta RS 520

Year: 2012
Engine: Four stroke, single cylinder,4 valve
Capacity: 497.4 cc / 30.4 cu in
Bore x Stroke: 100 x 63.4 mm
Compression Ratio: 12.1:1
Cooling System: Liquid cooled
Induction: Keihin FCR-MX 39mm
Lubrication: Twin oil pumps with cartridge oil filter. Separate oil for engine and clutch
Engine Oil Capacity: 0.8 L / 0.2 US gal
Ignition: DC-CDI with variable ignition timing, Kokusan.
Starting: Electric and kick
Spark Plug: NGK LKAR 8A-9
Clutch: Wet multi-disc
Gearbox Oil Capacity: 0.8 L / 0.2 US gal
Transmission: 6 Speed
Final Drive: O-ring chain, DID
Frame: Molybdenum steel with double cradle split above exhaust port. Air filter access from the side
Front Suspension: Sachs USD fork, 48 mm, adjustable compression and rebound, TFX technology,
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Sachs shock w/adjustable rebound and hi/low speed compression,
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single 260 mm floating disc, 2 piston caliper, Nissen
Rear Brakes: Single 240 mm disc, 1 piston caliper, Nissen
Front Tyre: 90/90 – 21
Rear Tyre: 140/80 -1 8
Wheelbase: 1475 mm / 58.1 in
Ground Clearance: 320 mm / 12.6 in
Seat Height: 934.7 mm / 36.8 in
Dry Weight: 108 kg / 240 lbs
Fuel Capacity: 7.9 L / 2.1 US gal
Review: Cycle News

The post Beta RR 400 Enduro (2012) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 400 Enduro (2015) https://motorcyclespecifications.com/beta-rr-400-enduro-2015-specs-2/ Mon, 03 Apr 2023 04:56:03 +0000 https://motorcyclespecifications.com/?p=42572 The Beta RS 430 motorcycle was released in 2015 with a four-stroke, single cylinder, 4 valve engine and a capacity of 431cc/26.3cu in. The engine has a liquid cooling system

The post Beta RR 400 Enduro (2015) appeared first on MotorcycleSpecifications.com.

]]> The Beta RS 430 motorcycle was released in 2015 with a four-stroke, single cylinder, 4 valve engine and a capacity of 431cc/26.3cu in. The engine has a liquid cooling system with a compression ratio of 11.95:1 and Keihin FCR-MX, 39mm induction. The motorcycle has twin oil pumps with cartridge oil filter and uses a DC-CDI ignition with variable ignition timing. In addition, it has an electric and kick starter, Trail Tech Voyager GPS unit, and NGK LKAR8A-9 spark plug. The clutch is a wet multi-disc with a six-speed transmission and final drive through an O-ring chain, DID.

The frame is lighter molybdenum steel with double cradle split above exhaust port and quick air filter access from the side. The suspension system comprises a Sachs USD fork, 48mm, and adjustability compression and rebound TFX technology. The front and rear wheel travel is 290mm/11.4in supported by aluminum body Sachs shock with adjustable rebound and hi/low speed compression. Braking is with a single 260mm disc, 2 piston caliper for the front and a single 240mm disc, 1 piston caliper for the rear wheels.

The motorcycle has a 90/90-21 front tire and a 140/80-18 rear tire with a wheelbase of 1475mm/58.1in. With a dry weight of 113kg/249lbs, the bike has a fuel capacity of 7.9L/2.1 US gal. The seat height is 930mm/36.6in, footrest height of 413mm/16.25in, and ground clearance of 320mm/12.6in. Overall, the Beta RS 430 offers a range of advanced features, making it suitable for enthusiasts who enjoy off-road adventures.

Technical specifications:

Make Model: Beta RS 430

Year: 2015
Engine: Four stroke, single cylinder, 4 valve
Capacity: 431 cc / 26.3 cu in
Bore x Stroke: 95 x 60.8 mm
Cooling System: Liquid cooled
Compression Ratio: 11.95:1
Induction: Keihin FCR-MX, 39 mm
Lubrication: Twin oil pumps with cartridge oil filter. Separate oil for engine and clutch
Engine Oil Capacity: 0.8 L / 0.2 US gal
Ignition: DC-CDI with variable ignition timing, Kokusan.
Electrical: Trail Tech Voyager GPS unit.
Starting: Electric & Kick
Spark Plug: NGK LKAR8A-9
Clutch: Wet multi-disc
Gearbox Oil Capacity: 0.8 L / 0.2 US gal
Transmission: 6 Speed
Final Drive: O-ring chain, DID
Primary Ratio: 31:73
Final Ratio: 15:48
Frame: Lighter Molybdenum steel with double cradle split above exhaust port. Quick Air filter access from the side
Front Suspension: Sachs USD fork, 48 mm, adjustable compression and rebound, TFX technology
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Aluminum body Sachs shock w/adjustable rebound and hi/low speed compression
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single 260 mm disc, 2 piston caliper
Rear Brakes: Single 240 mm disc, 1 piston caliper
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Wheelbase: 1475 mm / 58.1 in
Ground Clearance: 320 mm / 12.6 in
Footrest Height: 413 mm / 16.25 in
Seat Height: 930 mm / 36.6 in
Dry Weight: 113 kg / 249 lbs
Fuel Capacity: 7.9 L / 2.1 US gal

The post Beta RR 400 Enduro (2015) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 4T 480 Enduro (2015) https://motorcyclespecifications.com/beta-rr-4t-480-enduro-2015-specs/ Mon, 03 Apr 2023 00:02:01 +0000 https://motorcyclespecifications.com/?p=42306 The Beta RR 4T 480 Enduro motorcycle was introduced in 2015 and features a four-stroke, single-cylinder engine with a capacity of 477.5 cc. The engine has a compression ratio of

The post Beta RR 4T 480 Enduro (2015) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 4T 480 Enduro motorcycle was introduced in 2015 and features a four-stroke, single-cylinder engine with a capacity of 477.5 cc. The engine has a compression ratio of 12.1:1 and is lubricated by forced, 2 oil pumps. Keihin FCR-MX39 induction is used with an AC-CDI, Kokusan ignition and an NGK LKAR 8A-9 spark plug. The bike has both electric and kick start capabilities and a wet multi-disc clutch. It has a six-speed transmission and chain final drive with a 31:73 primary drive ratio. The frame is made of molybdenum steel with a double cradle split above the exhaust port, and the air filter can be accessed from the side. The front suspension is a 48mm Sachs USD fork with adjustable compression and rebound utilizing TFX technology, while the rear suspension is a Sachs shock with adjustable rebound and hi/low speed compression. The bike has a single wave 260mm floating disc with a two-piston floating caliper on the front, and a single 240mm disc with a one-piston floating caliper on the rear. The front wheel is a 1.60 x 21, while the rear wheel is a 2.15 x 18. Both the front and rear tires have travel distances of 290mm or 11.4 inches. Additionally, it has a ground clearance of 320mm or 12.6 inches, and weighs 112.5kg or 248lb with a fuel capacity of 8.0L or 2.1 US gallons and a 1.3L or 0.3 US gallon fuel reserve.

Technical specifications:

Make Model: Beta RR 4T 480 Enduro

Year: 2015
Engine: Four stroke, single cylinder with countershaft, DOHC, 4 valve
Capacity: 477.5 cc / 29.1 cu in
Bore x Stroke: 100 x 60.8 mm
Compression Ratio: 12.1:1
Lubrication: Forced, 2 oil pumps
Engine Oil: SAE 10W/50
Engine Oil Capacity: 0.8 L / 0.2 US gal
Cooling System: Liquid cooled, forced by pump
Induction: Keihin FCR-MX39
Ignition: AC-CDI, Kokusan
Spark Plug: NGK LKAR 8A-9
Starting: Electric and kick
Clutch: Wet multi-disc
Transmission: 6 Speed
Final Drive: Chain
Primary Drive: 31:73
Frame: Molybdenum steel with double cradle split above exhaust port. Air filter access from the side
Front Suspension: 48 mm Sachs USD fork, adjustable compression and rebound, TFX technology
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Sachs shock w/adjustable rebound and hi/low speed compression
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single wave 260 mm floating disc, 2 piston floating caliper
Rear Brakes: Single 240 mm disc, 1 piston floating caliper
Front Wheel: 1.60 x 21
Rear Wheel: 2.15 x 18
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Dimensions: Length: 2180 mm / 85.8 in Width: 807 mm / 31.8 in Height: 1270 mm / 50.0 in
Wheelbase: 1490 mm / 58.7 in
Seat Height: 940 mm / 37.0
Ground Clearance: 320 mm / 12.6 in
Footrest Height: 413 mm / 16.3 in
Dry Weight: 112,5 kg / 248 lb
Fuel Capacity: 8.0 L / 2.1 US gal
Fuel Reserve: 1.3 L / 0.3 US gal

The post Beta RR 4T 480 Enduro (2015) appeared first on MotorcycleSpecifications.com.

]]> Beta Alp4 (2007-08) https://motorcyclespecifications.com/beta-alp4-2007-08-specs/ Sun, 02 Apr 2023 23:31:04 +0000 https://motorcyclespecifications.com/?p=42281 The Beta Alp 4.0 is a motorcycle that was manufactured between the years 2007 and 2008. It has a four-stroke, single-cylinder, SOHC, 4-valve engine, with a capacity of 349cc. The

The post Beta Alp4 (2007-08) appeared first on MotorcycleSpecifications.com.

]]> The Beta Alp 4.0 is a motorcycle that was manufactured between the years 2007 and 2008. It has a four-stroke, single-cylinder, SOHC, 4-valve engine, with a capacity of 349cc. The bore and stroke of the engine are 79 x 71.2mm, respectively, and the compression ratio is 9.5:1. The cooling system is air-cooled, and induction is through a Mikuni BST 33 carburetor. The ignition is electronic, and starting is electric. The motorcycle has a maximum power of 20 kW / 27 hp and a maximum torque of 28 Nm / 2.9 kgf-m. The clutch is wet, multi-disc, and the transmission is six-speed. The final drive is through a chain. The frame is a tubular steel, double closed cradle, and the front suspension is a hydraulic fork with 48mm tubes. The rear suspension is a single shock adjustable for spring preload. The front and rear brakes are single discs, and the wheels are alloy with laced spokes. The front tyre is 90/90 -21, and the rear tyre is 140/80 -18. The dimensions of the motorcycle are length: 2185 mm, width: 860 mm, and height: 1230 mm, with a wheelbase of 1410 mm, ground clearance of 300 mm, and seat height of 865 mm. The dry weight of the motorcycle is 133 kg, with a fuel capacity of 10.5 litres and a fuel reserve of 3.5 litres. The fuel consumption is 5.6 L/100 km, and the standing 1/4 mile is 16.1 sec. The top speed of the Beta Alp 4.0 is 131.1 km/h or 81.5 mph.

Technical specifications:

Make Model: Beta Alp 4.0

Year: 2007 – 08
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 349 cc / 21.3 cu in
Bore x Stroke: 79 x 71.2 mm
Compression Ratio: 9.5:1
Cooling System: Air cooled
Induction: Mikuni BST 33
Ignition: Electronic
Starting: Electric
Max Power: 20 kW / 27 hp
Max Torque: 28 Nm / 2.9 kgf-m 21 lb-ft
Clutch: Wet, multi disc
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular steel, double closed cradle
Front Suspension: Hydraulic fork, 48mm
Front Wheel Travel: 200 mm / 7.9 in
Rear Suspension: Single shock adjustable spring preload
Rear Wheel Travel: 220 mm / 8.7 in
Front Brakes: Single 260 mm disc, 2-piston caliper
Rear Brakes: Single 220 mm disc, 2-piston caliper
Wheels: Alloy, laced spokes
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Dimensions: Length: 2185 mm / 86.0 in Width: 860 mm / 33.9 in Height: 1230 mm / 48.4 in
Wheelbase: 1410 mm / 55.5 in
Ground Clearance: 300 mm / 1.8 in
Seat Height: 865 mm / 34 in
Dry Weight: 133 kg / 293 lbs
Fuel Capacity: 10.5 Litres / 2.8 US gal
Fuel Reserve: 3.5 Litres / 0.9 US gal
Fuel Consumption: 5.6 L/100 km / 17.7 km/l / 41.6 US mpg
Standing 1/4 Mile: 16.1 sec
Top Speed: 131.1 km/h / 81.5 mph

The post Beta Alp4 (2007-08) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 400 Enduro (2014) https://motorcyclespecifications.com/beta-rr-400-enduro-2014-specs-3/ Sun, 02 Apr 2023 07:58:02 +0000 https://motorcyclespecifications.com/?p=41415 The Beta RR 400 Enduro from 2014 is a single cylinder, four-stroke motorcycle with a capacity of 349 cc and a liquid cooling system. It has a compression ratio of

The post Beta RR 400 Enduro (2014) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 400 Enduro from 2014 is a single cylinder, four-stroke motorcycle with a capacity of 349 cc and a liquid cooling system. It has a compression ratio of 12.1:1 and uses a Keihin FCR-MX 39 mm induction system. With a DC-CDI ignition and Kokusan variable ignition timing, the motorcycle has electric and kick starting. The Beta RR 400 Enduro has a wet multi-disc clutch and a 6-speed transmission with a final drive of an O-ring chain, DID. The bike has a molybdenum steel frame and a Marzocchi USD fork, 45 mm with adjustable compression and rebound, TFX technology. The rear suspension is a Sachs shock with adjustable rebound and hi/low speed compression, and both the front and rear suspension are able to travel 290 mm or 11.4 in. The brakes consist of a single 260 mm floating disc with a two-piston caliper at the front and a single 240 mm disc with a one-piston caliper at the rear. The motorcycle has front and rear tires of 90/90 -21 and 140/80 -18, respectively. The wheelbase is 1475 mm or 58.1 in with a ground clearance of 320 mm or 12.6 in. The dry weight of the Beta RR 400 Enduro is 108 kg or 240 lbs, and its fuel capacity is 7.9 L or 2.1 US gal.

Technical specifications:

Make Model: Beta RS 350

Year: 2014
Engine: Four stroke, single cylinder
Capacity: 349 cc / 21.3 cu in
Bore x Stroke: 88 x 57.4 mm
Cooling System: Liquid cooled
Compression Ratio: 12.1:1
Induction: Keihin FCR-MX 39 mm
Lubrication: Twin oil pumps with cartridge oil filter. Separate oil for engine and clutch
Engine Oil Capacity: 0.8 L / 0.2 US gal
Ignition: DC-CDI with variable ignition timing, Kokusan.
Spark Pluc: NGK LKAR 8A-9
Starting: Electric and kick
Spark Plug: NGK LKAR 8A-9
Clutch: Wet multi-disc
Gearbox Oil Capacity: 0.8 L / 0.2 US gal
Transmission: 6 Speed
Final Drive: O-ring chain, DID
Primary Ratio: 31:73
Final Ratio: 14:45
Frame: Molybdenum steel with double cradle split above exhaust port. Air filter access from the side
Front Suspension: Marzocchi USD fork, 45 mm, adjustable compression and rebound, TFX technology
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Sachs shock w/adjustable rebound and hi/low speed compression
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single 260 mm floating disc, 2 piston caliper
Rear Brakes: Single 240 mm disc, 1 piston caliper
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Wheelbase: 1475 mm / 58.1 in
Ground Clearance: 320 mm / 12.6 in
Seat Height: 934.7 mm / 36.8 in
Footrest Height: 411 mm / 16.2 in
Dry Weight: 108 kg / 240 lbs
Fuel Capacity: 7.9 L / 2.1 US gal

The post Beta RR 400 Enduro (2014) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 4T 430 Enduro (2015) https://motorcyclespecifications.com/beta-rr-4t-430-enduro-2015-specs/ Sun, 02 Apr 2023 04:43:02 +0000 https://motorcyclespecifications.com/?p=41231 The 2015 Beta RR 4T 430 Enduro motorcycle has a powerful four-stroke, single-cylinder engine with a capacity of 385.6 cc and a compression ratio of 12.5:1. The engine is equipped

The post Beta RR 4T 430 Enduro (2015) appeared first on MotorcycleSpecifications.com.

]]> The 2015 Beta RR 4T 430 Enduro motorcycle has a powerful four-stroke, single-cylinder engine with a capacity of 385.6 cc and a compression ratio of 12.5:1. The engine is equipped with DOHC and four valves, and has two oil pumps for forced lubrication. The bike is powered by an electric kick and has a wet multi-disc clutch system. The six-speed transmission has a chain-based final drive and a primary drive ratio of 28:76. The bike features a molybdenum steel frame with a double cradle split above the exhaust port. The air filter is accessible from the side. The front suspension is a 48 mm Sachs USD fork with adjustable compression and rebound, while the rear suspension is a Sachs shock with adjustable rebound and hi/low speed compression. The front and rear wheels are fitted with single and floating calipers respectively, with the front wheel featuring a large 260 mm floating disc. The bike has a wheelbase of 1490 mm and a seat height of 940 mm, with a ground clearance of 320 mm. It weighs 112 kg and has a fuel capacity of 8.0 L, with a fuel reserve of 1.3 L.

Technical specifications:

Make Model: Beta RR 4T 430 Enduro

Year: 2015
Engine: Four stroke, single cylinder with countershaft, DOHC, 4 valve
Capacity: 385.6 cc / 23.5 cu in
Bore x Stroke: 88 x 63.4 mm
Compression Ratio: 12.5:1
Lubrication: Forced, 2 oil pumps
Cooling System: Liquid cooled, forced by pump
Induction: Keihin FCR-MX39
Ignition: AC-CDI, Kokusan
Spark Plug: NGK LKAR 8A-9
Starting: Electric and kick
Clutch: Wet multi-disc
Transmission: 6 Speed
Final Drive: Chain
Primary Drive: 28:76
Frame: Molybdenum steel with double cradle split above exhaust port. Air filter access from the side
Front Suspension: 48 mm Sachs USD fork, adjustable compression and rebound, TFX technology
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Sachs shock w/adjustable rebound and hi/low speed compression
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single wave 260 mm floating disc, 2 piston floating caliper
Rear Brakes: Single 240 mm disc, 1 piston floating caliper
Front Wheel: 1.60 x 21
Rear Wheel: 2.15 x 18
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Dimensions: Length: 2180 mm / 85.8 in Width: 807 mm / 31.8 in Height: 1270 mm / 50.0 in
Wheelbase: 1490 mm / 58.7 in
Seat Height: 940 mm / 37.0
Ground Clearance: 320 mm / 12.6 in
Footrest Height: 413 mm / 16.3 in
Dry Weight: 112 kg / 247 lb
Fuel Capacity: 8.0 L / 2.1 US gal
Fuel Reserve: 1.3 L / 0.3 US gal

The post Beta RR 4T 430 Enduro (2015) appeared first on MotorcycleSpecifications.com.

]]> Beta Alp 200 4T (2003-04) https://motorcyclespecifications.com/beta-alp-200-4t-2003-04-specs/ Sun, 02 Apr 2023 03:32:00 +0000 https://motorcyclespecifications.com/?p=41165 The Beta Alp 200 4T was a motorcycle produced from 2003-04. It had a four stroke, single cylinder engine with a capacity of 199cc and a compression ratio of 9.4:1.

The post Beta Alp 200 4T (2003-04) appeared first on MotorcycleSpecifications.com.

]]> The Beta Alp 200 4T was a motorcycle produced from 2003-04. It had a four stroke, single cylinder engine with a capacity of 199cc and a compression ratio of 9.4:1. The bike was air-cooled and had forced lubrication with a pump. It had an electronic ignition and could be started with either an electric or kick start. The maximum power output was 11.2 kW or 15 hp at 7750 rpm. The transmission was a 5-speed and the final drive was chain. The front suspension featured hydraulic forks with 38mm front wheel travel, and the rear suspension was a single shock adjustable spring preload with 180mm wheel travel. The front brakes had a single 220 mm disc with a 2-piston caliper, while the rear brakes had a single 200 mm disc with a 1-piston caliper. The front wheel was a 2.75-21 and the rear wheel was a 4.00-18. The bike’s dimensions were 2150 mm in length, 830 mm in width, and 1170 mm in height, with a wheelbase of 1350 mm and a seat height of 830 mm. The ground clearance was 280 mm, and the dry weight was 103 kg. The fuel capacity was 6.8 L with a fuel reserve of 1.5 L.

Technical specifications:

Make Model: Beta Alp 200 4T

Year: 2003 – 04
Engine: Four stroke, single cylinder, SOHC, 2 valves per cylinder
Capacity: 199 cc / 12.1 cu in
Bore x Stroke: 66 x 58.2 mm
Compression Ratio: 9.4:1
Cooling System: Air cooled
Lubrication System: Forced, with pump
Induction: Mikuni BST 31 42AD
Ignition: Electronic
Starting: Electric & kick
Max Power: 11.2 kW / 15 hp @ 7750 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Hydraulic forks, 38mm
Front Wheel Travel: 170 mm / 6.7 in
Rear Suspension: Single shock adjustable spring preload
Rear Wheel Travel: 180 mm / 7.1 in
Front Brakes: Single 220 mm disc, 2-piston caliper
Rear Brakes: Single 200 mm disc, 1-piston caliper
Front Wheel: 2.75 -21
Rear Wheel: 4.00 -18
Front Tyre: 90/90-21
Rear Tyre: 120/80-18
Dimensions: Length: 2150 mm / 84.6 in Width: 830 mm / 32.3 in Height: 1170 mm / 46.1 in
Wheelbase: 1350 mm / 53.1 in
Seat Height: 830 mm / 32.7 in
Ground Clearance: 280 mm / 11 in
Dry Weight: 103 kg / 227 lbs
Fuel Capacity: 6.8 L / 1.8 US gal
Fuel Reserve: 1.5 L / 0.40 US gal

The post Beta Alp 200 4T (2003-04) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 400 Enduro (2015) https://motorcyclespecifications.com/beta-rr-400-enduro-2015-specs/ Sun, 02 Apr 2023 01:04:20 +0000 https://motorcyclespecifications.com/?p=41027 The Beta RR 400 Enduro motorcycle was released in 2015 and is equipped with a four-stroke, single-cylinder, 4-valve engine with a 478cc/29.2cu in capacity. It has a liquid cooling system

The post Beta RR 400 Enduro (2015) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 400 Enduro motorcycle was released in 2015 and is equipped with a four-stroke, single-cylinder, 4-valve engine with a 478cc/29.2cu in capacity. It has a liquid cooling system and a compression ratio of 12.1:1. Its induction system is controlled by Keihin FCR-MX 39mm, and the lubrication system comprises twin oil pumps with a cartridge oil filter. The ignition system uses DC-CDI with variable ignition timing, Kokusan. The motorcycle also features Trail Tech Voyager GPS unit and is equipped with an electric and kick-start system. Its transmission is a six-speed gearbox connected to a final drive system of an O-ring chain equipped with DID.

The front suspension is controlled by Sachs USD fork, 48 mm, with adjustable compression and rebound and TFX technology, while the rear suspension is operated with an Aluminum Body Sachs shock with adjustable rebound and hi/low speed compression. The brakes are single 260 mm disc with a 2-piston caliper for the front and single 240mm disc with a 1-piston caliper for the back.

The Beta RR 400 Enduro motorcycle has a seating height of 934.7 mm/36.8 in, ground clearance of 320mm/12.6 in, and a dry weight of 111.5kg/246 lbs. It has a fuel capacity of 7.9 L/2.1 US gal and features a lighter Molybdenum steel frame with a double cradle split above the exhaust port, allowing for quick air filter access from the side. The front tire size is 90/90-21, and the rear tire size is 140/80-18. Its wheelbase is 1475 mm/58.1 in.

Technical specifications:

Make Model: Beta RS 500

Year: 2015
Engine: Four stroke, single cylinder, 4 valve
Capacity: 478 cc / 29.2 cu in
Bore x Stroke: 100 x 60.8 mm
Cooling System: Liquid cooled
Compression Ratio: 12.1:1
Induction: Keihin FCR-MX 39mm
Lubrication: Twin oil pumps with cartridge oil filter. Separate oil for engine and clutch
Engine Oil Capacity: 0.8 L / 0.2 US gal
Ignition: DC-CDI with variable ignition timing, Kokusan.
Electrical: Trail Tech Voyager GPS unit.
Starting: Electric & Kick
Spark Plug: NGK LKAR8A-9
Clutch: Wet multi-disc
Gearbox Oil Capacity: 0.8 L / 0.2 US gal
Transmission: 6 Speed
Final Drive: O-ring chain, DID
Primary Ratio: 31:73
Final Ratio: 15:48
Frame: Lighter Molybdenum steel with double cradle split above exhaust port. Quick Air filter access from the side
Front Suspension: Sachs USD fork, 48 mm, adjustable compression and rebound, TFX technology,
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Aluminum Body Sachs shock w/adjustable rebound and hi/low speed compression
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single 260 mm disc, 2 piston caliper
Rear Brakes: Single 240mm disc, 1 piston caliper
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Wheelbase: 1475 mm / 58.1 in
Ground Clearance: 320 mm / 12.6 in
Seat Height: 934.7 mm / 36.8 in
Dry Weight: 111.5 kg / 246 lbs
Fuel Capacity: 7.9 L / 2.1 US gal

The post Beta RR 400 Enduro (2015) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 250 Enduro (2005-06) https://motorcyclespecifications.com/beta-rr-250-enduro-2005-06-specs/ Sat, 01 Apr 2023 17:02:12 +0000 https://motorcyclespecifications.com/?p=40583 The Beta RR 250 Enduro is a motorcycle produced in 2005-06 with a four-stroke, single-cylinder, DOHC, 4-valve engine with a capacity of 250cc/15.3 cu in. It has a compression ratio

The post Beta RR 250 Enduro (2005-06) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 250 Enduro is a motorcycle produced in 2005-06 with a four-stroke, single-cylinder, DOHC, 4-valve engine with a capacity of 250cc/15.3 cu in. It has a compression ratio of 12.0:1 and uses a forced lubrication system with 2 oil pumps. The bike is cooled by air and features a Keihin FCR-MX 37 carburetor for induction. The ignition system is a DC-CDI without trembler with variable ignition timing, Kokusan type, and uses an NGK DCPR 8 E spark plug. The bike can be started with an electric or kick start and has a wet, multiplate clutch with a 6-speed transmission and a chain final drive. The primary drive ratio is 33/76. The frame is made of molybdenum steel with double cradle split above the exhaust port and has a 26.5-degree rake and 108.5 mm/4.3 in trail. The front suspension is a Marzocchi hydraulic USD fork with 45 mm diameter and 290 mm/11.4 in wheel travel while the rear suspension is a monoshock with progressive compound lever and 300 mm/11.8 in wheel travel. The front and rear brakes are respectively a single 255 mm disc with two floating piston calipers and a single 240 mm disc with one floating piston caliper. The wheels are made of alloy with laced spokes and sizes 1.60 x 21 for the front and 2.15 x 18 for the rear. The tyres are 90/90 -21 for the front and 140/80 -18 for the rear. The seat height is 940 mm/37 in with a ground clearance of 320 mm/12.6 in and a dry weight of 117.5 kg/259 lbs. The fuel capacity is 8.5 L/2.2 US gal with a 1.0 L/0.3 US gal fuel reserve.

Technical specifications:

Make Model: Beta RR 250 Enduro

Year: 2005 – 06
Engine: Four stroke, single cylinder, DOHC, 4 valves
Capacity: 250 cc / 15.3 cu in
Bore x Stroke: 75 x 56.5 mm
Compression Ratio: 12.0:1
Lubrication System: Forced with 2 oil pumps
Cooling System: Air cooled
Induction: Keihin FCR-MX 37 carburetor
Ignition: DC-CDI without trembler with variable ignition timing, Kokusan type
Spark Plug: NGK DCPR 8 E
Starting: Electric and kick start
Clutch: Wet, multiplate
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 14:38 / 2nd 16:36 / 3rd 19:34 / 4th 21:32 / 5th 23:30 / 6th 22:25
Primary Drive: 33/76
Frame: Molybdenum steel with double cradle split above the exhaust port
Rake: 26.5 degrees
Trail: 108.5 mm / 4.3 in
Front Suspension: Marzocchi hydraulic USD fork, 45 mm
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Monoshock with progressive compound lever
Rear Wheel Travel: 300 mm / 11.8 in
Front Brakes: Single 255 mm disc, 2 floating piston calipers
Rear Brakes: Single 240 mm disc, 1 floating piston caliper
Wheels: Alloy, laced spokes
Front Wheel: 1.60 x 21
Rear Wheel: 2.15 x 18
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Dimensions: Length: 2270 mm / 89.4 in Width: 813 mm / 32.0 in Height: 1255 mm / 49.4 in
Wheelbase: 1490 mm / 58.7 in
Seat Height: 940 mm / 37 in
Ground Clearance: 320 mm / 12.6 in
Footrest Height: 405 mm / 15.9 in
Dry Weight: 117.5 kg / 259 lbs
Fuel Capacity: 8.5 L / 2.2 US gal
Fuel Reserve: 1.0 L / 0.3 US gal

The post Beta RR 250 Enduro (2005-06) appeared first on MotorcycleSpecifications.com.

]]> Beta Euro 350 (2003-06) https://motorcyclespecifications.com/beta-euro-350-2003-06-specs/ Sat, 01 Apr 2023 12:23:08 +0000 https://motorcyclespecifications.com/?p=40328 The Beta Euro 350 motorcycle was produced between 2003 and 2006. It features a four-stroke, single-cylinder engine with a capacity of 349 cc and a compression ratio of 9.5:1. The

The post Beta Euro 350 (2003-06) appeared first on MotorcycleSpecifications.com.

]]> The Beta Euro 350 motorcycle was produced between 2003 and 2006. It features a four-stroke, single-cylinder engine with a capacity of 349 cc and a compression ratio of 9.5:1. The bike has an air-cooled system, a Mikuni BST 33 induction, and an electronic ignition. The motorcycle has a maximum power output of 20 kW or 27 hp at 9000 rpm. The bike comes with a six-speed transmission and a chain final drive.

The frame of the motorcycle consists of a tubular steel, double closed cradle, and suspension features a hydraulic fork with 48mm front wheel travel and a single shock adjustable spring preload at the rear with 100 mm of wheel travel. The front brakes are a single 300 mm disc with a 2-piston caliper, while the rear brakes are a single 220 mm disc with a 2-piston caliper. The wheels are alloy with laced spokes and have a front wheel size of 2.50 x 16 and a rear wheel size of 3.50 x 15. The front tire is 120/80-16, while the rear tire is 140/90 -15.

The bike has a length of 2210 mm and a height of 1090 mm, with a wheelbase of 1470 mm and a ground clearance of 240 mm. The seat height is 740 mm, and the dry weight is 138 kg. The fuel capacity is 22 liters, and the bike comes in black, red, or blue.

Technical specifications:

Make Model: Beta Euro 350

Year: 2003 – 06
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 349 cc / 21.3 cu in
Bore x Stroke: 79 x 71.2 mm
Compression Ratio: 9.5:1
Cooling System: Air cooled
Induction: Mikuni BST 33
Ignition: Electronic
Starting: Electric
Max Power: 20 kW / 27 hp @ 9000 rpm
Clutch: Wet, multi disc
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular steel, double closed cradle
Front Suspension: Hydraulic fork, 48mm
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Single shock adjustable spring preload
Rear Wheel Travel: 100 mm / 3.9in
Front Brakes: Single 300 mm disc, 2-piston caliper
Rear Brakes: Single 220 mm disc, 2-piston caliper
Wheels: Alloy, laced spokes
Front Wheel: 2.50 x 16
Rear Wheel: 3.50 x 15
Front Tyre: 120/80-16
Rear Tyre: 140/90 -15
Dimensions: Length: 2210 mm / 87.0 in Height: 1090 mm / 42.9 in
Wheelbase: 1470 mm / 57.9 in
Ground Clearance: 240 mm/ 9.4 in
Seat Height: 740 mm / 29.1 in
Dry Weight: 138 kg / 304 lbs
Fuel Capacity: 22 Litres / 5.8 US gal
Colours: Black, Red, Blue

The post Beta Euro 350 (2003-06) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 450 Enduro (2011-13) https://motorcyclespecifications.com/beta-rr-450-enduro-2011-13-specs/ Sat, 01 Apr 2023 10:03:05 +0000 https://motorcyclespecifications.com/?p=40198 The Beta RR 450 Enduro motorcycle was produced between 2011 and 2013, and features a four-stroke, single-cylinder DOHC, 4 valves engine with a capacity of 448cc. The engine has a

The post Beta RR 450 Enduro (2011-13) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 450 Enduro motorcycle was produced between 2011 and 2013, and features a four-stroke, single-cylinder DOHC, 4 valves engine with a capacity of 448cc. The engine has a compression ratio of 11.95:1 and is liquid-cooled with a forced lubrication system that employs two oil pumps. The motorcycle is powered by a Keihin FCR-MX 39 induction system and an ignition system that employs DC-CDI without trembler with variable ignition timing. The motorcycle is equipped with a wet, multi-plate clutch and transmission that features six speeds. The drive train employs a chain final drive and has a primary drive of 33/76. The motorcycle has a frame made of Molybdenum steel with a double cradle split above the exhaust port, and it features a hydraulic USD fork, 45mm front suspension, and a monoshock with a progressive compound lever rear suspension. The front brake utilizes a single 260mm floating disc with a two-piston floating caliper, while the rear brake uses a single 240mm disc with a one-piston floating caliper. The motorcycle has a length of 2180mm, a width of 807mm, and a height of 1270mm. The wheelbase measures 1490mm, and the seat height is 940mm. The motorcycle has a dry weight of 117kg and has a fuel capacity of 8.5L, including a fuel reserve of 1L.

Technical specifications:

Make Model: Beta RR 450 Enduro

Year: 2011 – 13
Engine: Four stroke, single cylinder, DOHC, 4 valves
Capacity: 448 cc / 27.3 cu in
Bore x Stroke: 95 x 63.4 mm
Compression Ratio: 11.95:1
Cooling System: Liquid cooled
Lubrication System: Forced, 2 oil pumps
Engine Oil: 15W-50
Oil Capacity: 0.8 L / 0.2 US gal
Induction: Keihin FCR-MX 39
Ignition: DC-CDI without trembler with variable ignition timing, Kokusan type
Spark Plug: NGK LKAR 8A-9
Starting: Electric and kick
Clutch: Wet, multi-plate
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 12:31 / 2nd 15:28 / 3rd 19:28 / 4th 20:24 / 5th 27:27 / 6th 28:24
Primary Drive: 33/76
Frame: Molybdenum steel with double cradle split above the exhaust port
Front Suspension: Hydraulic USD fork, 45mm
Front Wheel Travel: 290 mm / 11.2 in
Rear Suspension: Monoshock with progressive compound lever
Rear Wheel Travel: 290 mm / 11.2 in
Front Brakes: Single 260 mm floating disc, 2 piston floating caliper
Rear Brakes: Single 240 mm disc, 1 piston floating caliper
Front Wheel: 1.60 x 21
Front Tyre: 90/90 – 21
Rear Wheel: 2.15 x 18
Rear Tyre: 140/80 – 18
Dimensions: Length: 2180 mm / 50.4 in Width: 807 mm / 31.8 in Height: 1270 mm / 50.0 in
Wheelbase: 1490 mm / 58.7 in
Seat Height: 940 mm / 37 in
Ground Clearance: 320 mm / 12.6 in
Footrest Height: 413 mm / 16.3 in
Dry Weight: 117 kg / 258 lbs
Fuel Capacity: 8.5 L / 2.2 US gal
Fuel Reserve: 1 L / 0.3 US gal

The post Beta RR 450 Enduro (2011-13) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 400 Enduro (2005-06) https://motorcyclespecifications.com/beta-rr-400-enduro-2005-06-specs/ Sat, 01 Apr 2023 00:03:06 +0000 https://motorcyclespecifications.com/?p=39642 The Beta RR 400 Enduro is a four-stroke, single-cylinder, DOHC, 398cc motorcycle with a compression ratio of 11.0:1. It has a forced lubrication system with two oil pumps, air cooling,

The post Beta RR 400 Enduro (2005-06) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 400 Enduro is a four-stroke, single-cylinder, DOHC, 398cc motorcycle with a compression ratio of 11.0:1. It has a forced lubrication system with two oil pumps, air cooling, and a Keihin FCR-MX 39 induction system. The DC-CDI ignition has variable timing, and it can be started with both an electric and kick starter. The six-speed transmission and chain final drive are standard, with a molybdenum steel frame that includes a double cradle split above the exhaust port. The front suspension is a hydraulic USD fork with 45mm of travel, and the rear suspension is a monoshock with progressive compound lever and 300mm of travel. The alloy wheels have laced spokes with the front being 1.60 x 21 and the rear being 2.15 x 18. The front brake is a single 255mm disc with a two-piston caliper, and the rear brake is a single 240mm disc with a one-piston caliper. The seat height is 940mm, and the ground clearance is 320mm with a dry weight of 117.5kg. It has an 8.5L fuel capacity and a Moto.it review.

Technical specifications:

Make Model: Beta RR 400 Enduro

Year: 2005 – 06
Engine: Four stroke, single cylinder, DOHC, 4 valves
Capacity: 398 cc / 24.3 cu in
Bore x Stroke: 95x 56.2 mm
Compression Ratio: 11.0:1
Lubrication: Forced, 2 oil pumps
Cooling System: Air cooled
Induction: Keihin FCR-MX 39
Ignition: DC-CDI without trembler with variable ignition timing, Kokusan type
Starting: Electric and kick
Transmission: 6 Speed
Final Drive: Chain
Frame: Molybdenum steel with double cradle split above the exhaust port
Front Suspension: Hydraulic USD fork, 45 mm
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Monoshock with progressive compound lever
Rear Wheel Travel: 300 mm / 11.8 in
Wheels: Alloy, laced spokes
Front Wheel: 1.60 x 21
Rear Wheel: 2.15 x 18
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Front Brakes: Single 255 mm disc, 2 piston caliper
Rear Brakes: Single 240 mm disc, 1 piston caliper
Seat Height: 940 mm / 37 in
Ground Clearance: 320 mm / 12.6 in
Dry Weight: 117,5 kg / 258 lbs
Fuel Capacity: 8.5 L / 2.2 US gal
Review: Moto.it

The post Beta RR 400 Enduro (2005-06) appeared first on MotorcycleSpecifications.com.

]]> Beta Alp 200 4T (2008) https://motorcyclespecifications.com/beta-alp-200-4t-2008-specs/ Fri, 31 Mar 2023 22:15:53 +0000 https://motorcyclespecifications.com/?p=39543 The Beta Alp 200 4T is a motorcycle built in 2008. This model features a four-stroke, single cylinder engine with a capacity of 124cc and a compression ratio of 10.0:1.

The post Beta Alp 200 4T (2008) appeared first on MotorcycleSpecifications.com.

]]> The Beta Alp 200 4T is a motorcycle built in 2008. This model features a four-stroke, single cylinder engine with a capacity of 124cc and a compression ratio of 10.0:1. The cooling system is air-cooled and ignition is electronic, with electric and kick starting. Transmission is five-speed with a chain final drive. The bike’s front suspension is hydraulic forks with a 38mm diameter, with a 170mm front wheel travel, and the rear suspension features a single shock adjustable spring preload with a 180mm rear wheel travel. Both the front and rear brakes consist of a single disc and piston caliper. The bike’s wheels are sized at 1.85 x 21 inches for the front and 2.50 x 18 inches for the rear. The tires are 90/90-21 for the front and 120/80-18 for the rear. Measuring at a length of 2150mm, a width of 820mm, and a height of 1150mm, the bike’s seat height is 850mm and ground clearance is 298mm. The dry weight of the motorcycle is 101kg and the fuel capacity is 6.8L, with a fuel reserve of 1.5L.

Technical specifications:

Make Model: Beta Alp 125 4T

Year: 2008
Engine: Four stroke, single cylinder, SOHC, 2 valves per cylinder
Capacity: 124 cc / 7.6 cu in
Bore x Stroke: 54 x 54 mm
Compression Ratio: 10.0:1
Cooling System: Air cooled
Induction: Mikuni UCAL, 26 mm
Ignition: Electronic
Starting: Electric & kick
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Hydraulic forks, 38 mm
Front Wheel Travel: 170 mm / 6.7 in
Rear Suspension: Single shock adjustable spring preload
Rear Wheel Travel: 180 mm / 7.1 in
Front Brakes: Single 245 mm disc, 2-piston caliper
Rear Brakes: Single 220 mm disc, 1-piston caliper
Front Wheel: 1.85 x 21
Rear Wheel: 2.50 x 18
Front Tyre: 90/90-21
Rear Tyre: 120/80-18
Dimensions: Length: 2150 mm / 84.6 in Width: 820 mm / 32.3 in Height: 1150 mm / 45.3 in
Ground Clearance: 298 mm / 11.7 in
Seat Height: 850 mm / 33.5 in
Dry Weight: 101 kg / 223 lbs
Fuel Capacity: 6.8 L / 1.8 US gal
Fuel Reserve: 1.5 L / 0.40 US gal

The post Beta Alp 200 4T (2008) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 400 Enduro (2013) https://motorcyclespecifications.com/beta-rr-400-enduro-2013-specs-3/ Fri, 31 Mar 2023 09:51:03 +0000 https://motorcyclespecifications.com/?p=38860 The Beta RR 400 Enduro motorcycle was a model released in 2013. It has a four-stroke, single-cylinder engine with a capacity of 497.4 cc and a compression ratio of 12.1:1.

The post Beta RR 400 Enduro (2013) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 400 Enduro motorcycle was a model released in 2013. It has a four-stroke, single-cylinder engine with a capacity of 497.4 cc and a compression ratio of 12.1:1. The engine is liquid-cooled and has a Keihin FCR-MX 39mm induction system. The bike also features twin oil pumps with separate oil for the engine and clutch, as well as an oil filter cartridge. The ignition is a DC-CDI with variable ignition timing, Kokusan. The bike has both an electric and kick start option. The clutch is a wet multi-disc and the gearbox oil capacity is 0.8 L. The transmission has 6 speeds and a final drive of an O-ring chain, DID. The frame is made of molybdenum steel with a double cradle split above the exhaust port. The bike has Sachs USD forks with TFX technology and 48 mm adjustable compression and rebound for the front suspension. The rear suspension has a Sachs shock and is adjustable for rebound and hi/low speed compression. The front and rear brakes are single-disc with a 260mm floating disc and two piston caliper for the front, and a 240mm disc and one piston caliper for the rear. The front tire is 90/90-21, while the rear is 140/80-18. The bike has a wheelbase of 1475 mm, a ground clearance of 320 mm, and a seat height of 934.7 mm. It weighs 108 kg and has a fuel capacity of 7.9 L. The 2013 Beta RR 400 Enduro motorcycle received a review from Cycle News.

Technical specifications:

Make Model: Beta RS 520

Year: 2013
Engine: Four stroke, single cylinder,4 valve
Capacity: 497.4 cc / 30.4 cu in
Bore x Stroke: 100 x 63.4 mm
Compression Ratio: 12.1:1
Cooling System: Liquid cooled
Induction: Keihin FCR-MX 39mm
Lubrication: Twin oil pumps with cartridge oil filter. Separate oil for engine and clutch
Engine Oil Capacity: 0.8 L / 0.2 US gal
Ignition: DC-CDI with variable ignition timing, Kokusan.
Starting: Electric and kick
Spark Plug: NGK LKAR 8A-9
Clutch: Wet multi-disc
Gearbox Oil Capacity: 0.8 L / 0.2 US gal
Transmission: 6 Speed
Final Drive: O-ring chain, DID
Frame: Molybdenum steel with double cradle split above exhaust port. Air filter access from the side
Front Suspension: Sachs USD fork, 48 mm, adjustable compression and rebound, TFX technology,
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Sachs shock w/adjustable rebound and hi/low speed compression,
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single 260 mm floating disc, 2 piston caliper, Nissen
Rear Brakes: Single 240 mm disc, 1 piston caliper, Nissen
Front Tyre: 90/90 – 21
Rear Tyre: 140/80 -1 8
Wheelbase: 1475 mm / 58.1 in
Ground Clearance: 320 mm / 12.6 in
Seat Height: 934.7 mm / 36.8 in
Dry Weight: 108 kg / 240 lbs
Fuel Capacity: 7.9 L / 2.1 US gal
Review: Cycle News

The post Beta RR 400 Enduro (2013) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 400 Enduro (2012) https://motorcyclespecifications.com/beta-rr-400-enduro-2012-specs-3/ Fri, 31 Mar 2023 07:56:08 +0000 https://motorcyclespecifications.com/?p=38755 The Beta RR 400 Enduro motorcycle is a four stroke, single cylinder, 4 valve bike with a 449 cc capacity and a compression ratio of 11.95:1. It is liquid cooled

The post Beta RR 400 Enduro (2012) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 400 Enduro motorcycle is a four stroke, single cylinder, 4 valve bike with a 449 cc capacity and a compression ratio of 11.95:1. It is liquid cooled and has a Keihin FCR-MX 39 mm induction system. Its engine oil capacity is 0.8 L, and it has a wet, multi-plate clutch and a 6-speed transmission. The frame is made of molybdenum steel with a double cradle split above the exhaust port. The front suspension features a Sachs USD fork with adjustable compression and rebound, while the rear suspension includes a Sachs shock with adjustable rebound and hi/low speed compression. The front and rear brakes are single 260mm and 240mm discs, respectively. The wheels have a 90/90-21 front tyre and a 140/80-18 rear tyre. It has a wheelbase of 1475 mm, ground clearance of 320 mm, and a seat height of 934.7 mm. The dry weight is 108 kg and the fuel capacity is 7.9 L. According to Ultimate Motorcycling, the Beta RR 400 Enduro is a good off-road bike suitable for tackling difficult terrain.

Technical specifications:

Make Model: Beta RS 450

Year: 2012
Engine: Four stroke, single cylinder, 4 valve
Capacity: 449 cc / 27.4 cu in
Bore x Stroke: 95 x 63.4 mm
Compression Ratio: 11.95:1
Cooling System: Liquid cooled
Induction: Keihin FCR-MX 39 mm
Lubrication: Twin oil pumps with cartridge oil filter. Separate oil for engine and clutch
Engine Oil Capacity: 0.8 L / 0.2 US gal
Ignition: DC-CDI with variable ignition timing, Kokusan.
Starting: Electric and kick
Spark Plug: NGK LKAR 8A-9
Clutch: Wet, multi-plate
Gearbox Oil Capacity: 0.8 L / 0.2 US gal
Transmission: 6 Speed
Final Drive: O-ring chain, DID
Frame: Molybdenum steel with double cradle split above exhaust port. Air filter access from the side
Front Suspension: Sachs USD fork, 48 mm, adjustable compression and rebound, TFX technology
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Sachs shock w/adjustable rebound and hi/low speed compression,
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single 260 mm disc, 2 piston caliper
Rear Brakes: Single 240 mm disc, 1 piston caliper
Front Tyre: 90/90 – 21
Rear Tyre: 140/80 – 18
Wheelbase: 1475 mm / 58.1 in
Ground Clearance: 320 mm / 12.6 in
Seat Height: 934.7 mm / 36.8 in
Dry Weight: 108 kg / 240 lbs
Fuel Capacity: 7.9 L / 2.1 gal
Review: Ultimate Motorcycling

The post Beta RR 400 Enduro (2012) appeared first on MotorcycleSpecifications.com.

]]> Beta RR125 (2011-13) https://motorcyclespecifications.com/beta-rr125-2011-13-specs/ Fri, 31 Mar 2023 05:36:00 +0000 https://motorcyclespecifications.com/?p=38623 The Beta RR 125 Motard motorcycle was produced between 2011 and 2013. The bike featured a four-stroke, single-cylinder, SOHC engine with a capacity of 123cc and a compression ratio of

The post Beta RR125 (2011-13) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 125 Motard motorcycle was produced between 2011 and 2013. The bike featured a four-stroke, single-cylinder, SOHC engine with a capacity of 123cc and a compression ratio of 10.0:1. The lubrication system was forced with a pump, and it required SAE 15W/50 oil. The motorcycle had both electric and kick starting, and its clutch was a wet, multiplate system. The transmission was five-speed, and the final drive was through a chain. The frame of the bike was made of steel with a double cradle suspension system. The front suspension consisted of hydraulic forks, while the rear suspension had a single shock that had adjustable spring preload. The bike’s front brakes were single 260mm discs, while the rear brakes were single 220mm discs. The motorcycle had 1.6 x 17 front wheels and 1.85 x 17 rear wheels. The front tyre was 110/80 – 17, while the rear tyre was 130/80 – 17. The dimensions of the bike were 2065mm in length, 820mm in width, and 1230mm in height. The motorcycle had a dry weight of 102kg and a fuel capacity of 5.7L. The standing 1/4 mile time for the bike was 12.7 seconds, and its top speed was 95.2km/h. The bike was available in blue, black, and red colours.

Technical specifications:

Make Model: Beta RR 125 Motard

Year: 2011 – 13
Engine: Four stroke, single cylinder, SOHC
Capacity: 123 cc / 7.5 cu in
Bore x Stroke: 54 x 54 mm
Compression Ratio: 10.0:1
Lubrication: Forced, with pump
Engine Oil: SAE 15W/50
Oil Capacity: 1.2 L / 0.3 US gal
Cooling System: Liquid cooled
Induction: Mikuni 5NH1 carburetor
Ignition: Moriyama F5HH
Spark Plug: NGK R CR7 HSA
Starting: Electric & kick
Clutch: Wet, multiplate
Transmission: 5 Speed
Final Drive: Chain
Primary Drive: 20:68
Secondary Drive: 14:50
Frame: Steel, double cradle
Front Suspension: Hydraulic forks, 41mm
Front Wheel Travel: 245 mm / 9.6 in
Rear Suspension: Single shock, adjustable spring preload
Rear Wheel Travel: 220 mm / 8.7 in
Front Brakes: Single 260 mm disc
Rear Brakes: Single 220 mm disc
Front Wheel: 1.6 x 17
Rear Wheel: 1.85 x 17
Front Tyre: 110/80 – 17
Rear Tyre: 130/80 – 17
Dimensions: Length: 2065 mm / 81.3 in Width: 820 mm / 32.3 in Height: 1230 mm / 48.4 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 310 mm / 12.2 in
Footrest Height: 378 mm / 14.9 in
Seat Height: 920 mm / 36.3 in
Dry Weight: 102 kg / 225 lbs
Wet Weight: 110 kg / 243 lbs
Fuel Capacity: 5.7 L / 1.5 US gal
Fuel Reserve: 1.0 L / 0.3 US gal
Standing 1/4 Mile: 12.7 sec
Top Speed: 95.2 km/h / 59 mph
Colours: Blue, Black, Red

The post Beta RR125 (2011-13) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 450 Enduro (2007-08) https://motorcyclespecifications.com/beta-rr-450-enduro-2007-08-specs/ Thu, 30 Mar 2023 17:37:26 +0000 https://motorcyclespecifications.com/?p=37955 The Beta RR 450 Enduro is a four-stroke, single cylinder, DOHC, 448cc motorbike with a 6-speed transmission and chain final drive. It has a molybdenum frame with double cradle split

The post Beta RR 450 Enduro (2007-08) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 450 Enduro is a four-stroke, single cylinder, DOHC, 448cc motorbike with a 6-speed transmission and chain final drive. It has a molybdenum frame with double cradle split above the exhaust port, as well as hydraulic USD fork front suspension and a monoshock with a progressive compound lever rear suspension. The front and rear brakes are a single 255mm disc with a 2-piston floating caliper and a single 240mm disc with a 1-piston floating caliper, respectively. The motorbike has a fuel capacity of 8.5 L/2.2 US gal and a fuel reserve of 1 L/0.3 US gal. The dry weight of the motorcycle is 117 kg/258 lbs, and its dimensions are 2270 mm/89.4 in in length, 813 mm/32.0 in in width, and 1255 mm/49.4 in in height, with a wheelbase of 1500 mm/59.1 in and a seat height of 940 mm/37 in. The ground clearance is 320 mm/12.6 in. The bike is started via a kick, has a Keihin FCR-MX 39 induction, and a DC-CDI without trembler with variable ignition timing, Kokusan type ignition. The bike’s front wheel is 1.60 x 21, and its front tire is 90/90 – 21, whereas the rear wheel is 2.15 x 18, and the rear tire is 140/80 – 18.

Technical specifications:

Make Model: Beta RR 450 Enduro

Year: 2007 – 08
Engine: Four stroke, single cylinder, DOHC, 4 valves
Capacity: 448 cc / 27.3 cu in
Bore x Stroke: 89 x 72 mm
Compression Ratio: 11.0:1
Cooling System: Liquid cooled
Lubrication System: Forced, 2 oil pumps
Induction: Keihin FCR-MX 39
Ignition: DC-CDI without trembler with variable ignition timing, Kokusan type
Starting: Kick
Transmission: 6 Speed
Final Drive: Chain
Frame: Molybdenum steel with double cradle split above the exhaust port
Front Suspension: Hydraulic USD fork, 45mm
Front Wheel Travel: 290 mm / 11.2 in
Rear Suspension: Monoshock with progressive compound lever
Rear Wheel Travel: 300 mm / 11.8 in
Front Brakes: Single 255mm disc, 2 piston floating caliper
Rear Brakes: Single 240 mm disc, 1 piston floating caliper
Front Wheel: 1.60 x 21
Front Tyre: 90/90 – 21
Rear Wheel: 2.15 x 18
Rear Tyre: 140/80 – 18
Dimensions: Length: 2270 mm / 89.4 in Width: 813 mm / 32.0 in Height: 1255 mm / 49.4 in
Wheelbase: 1500 mm / 59.1 in
Seat Height: 940 mm / 37 in
Ground Clearance: 320 mm / 12.6 in
Dry Weight: 117 kg / 258 lbs
Fuel Capacity: 8.5 L / 2.2 US gal
Fuel Reserve: 1 L / 0.3 US gal

The post Beta RR 450 Enduro (2007-08) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 400 Enduro (2013) https://motorcyclespecifications.com/beta-rr-400-enduro-2013-specs-2/ Thu, 30 Mar 2023 16:17:15 +0000 https://motorcyclespecifications.com/?p=37880 The Beta RR 400 Enduro motorcycle from 2013 has a four-stroke, single-cylinder, 449 cc engine with a compression ratio of 11.95:1. It is liquid-cooled and has induction through a Keihin

The post Beta RR 400 Enduro (2013) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 400 Enduro motorcycle from 2013 has a four-stroke, single-cylinder, 449 cc engine with a compression ratio of 11.95:1. It is liquid-cooled and has induction through a Keihin FCR-MX 39 mm carburetor. The ignition is DC-CDI with variable timing, and it has both electric and kick start options. The transmission is six-speed, and the final drive is an O-ring chain. The frame is made of molybdenum steel with a double cradle split above the exhaust port. The front suspension has a Sachs USD fork, and the rear suspension has a Sachs shock with adjustable rebound and hi/low speed compression. The front brakes have a single 260 mm disc with a two-piston caliper, and the rear brakes have a single 240 mm disc with a one-piston caliper. The front tire measures 90/90-21, and the rear tire’s dimensions are 140/80-18. Its wheelbase is 1475 mm, ground clearance is 320 mm, and seat height is 934.7 mm. It weighs 108 kg and has a fuel capacity of 7.9 L.

Technical specifications:

Make Model: Beta RS 450

Year: 2013
Engine: Four stroke, single cylinder, 4 valve
Capacity: 449 cc / 27.4 cu in
Bore x Stroke: 95 x 63.4 mm
Compression Ratio: 11.95:1
Cooling System: Liquid cooled
Induction: Keihin FCR-MX 39 mm
Lubrication: Twin oil pumps with cartridge oil filter. Separate oil for engine and clutch
Engine Oil Capacity: 0.8 L / 0.2 US gal
Ignition: DC-CDI with variable ignition timing, Kokusan.
Starting: Electric and kick
Spark Plug: NGK LKAR 8A-9
Clutch: Wet, multi-plate
Gearbox Oil Capacity: 0.8 L / 0.2 US gal
Transmission: 6 Speed
Final Drive: O-ring chain, DID
Frame: Molybdenum steel with double cradle split above exhaust port. Air filter access from the side
Front Suspension: Sachs USD fork, 48 mm, adjustable compression and rebound, TFX technology
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Sachs shock w/adjustable rebound and hi/low speed compression,
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single 260 mm disc, 2 piston caliper
Rear Brakes: Single 240 mm disc, 1 piston caliper
Front Tyre: 90/90 – 21
Rear Tyre: 140/80 – 18
Wheelbase: 1475 mm / 58.1 in
Ground Clearance: 320 mm / 12.6 in
Seat Height: 934.7 mm / 36.8 in
Dry Weight: 108 kg / 240 lbs
Fuel Capacity: 7.9 L / 2.1 gal

The post Beta RR 400 Enduro (2013) appeared first on MotorcycleSpecifications.com.

]]> Beta Alp4 (2005-06) https://motorcyclespecifications.com/beta-alp4-2005-06-specs/ Thu, 30 Mar 2023 16:05:05 +0000 https://motorcyclespecifications.com/?p=37870 The Beta Alp 4.0 is a motorcycle that was produced between 2005 and 2006. It features a four-stroke, single-cylinder, air-cooled engine with a capacity of 349cc and a compression ratio

The post Beta Alp4 (2005-06) appeared first on MotorcycleSpecifications.com.

]]> The Beta Alp 4.0 is a motorcycle that was produced between 2005 and 2006. It features a four-stroke, single-cylinder, air-cooled engine with a capacity of 349cc and a compression ratio of 9.5:1. The engine produces a maximum power of 20kW/27hp and a maximum torque of 28Nm/21lb-ft. It comes with a six-speed transmission and a wet, multi-disc clutch. The frame is made of tubular steel, and the front suspension consists of a hydraulic fork with a 48mm diameter. The rear suspension is a single shock with adjustable spring preload. The front and rear brakes are both single-disc with 2-piston calipers. The wheels are alloy with laced spokes, and the tires are a 90/90-21 at the front and a 140/80-18 at the back. The bike is 2185mm/86.0in long, 860mm/33.9in wide, and 1230mm/48.4in high, with a wheelbase of 1410mm/55.5in and a ground clearance of 300mm/11.8in. The seat height is 865mm/34in, and the dry weight is 133kg/293lbs. It has a fuel capacity of 10.5 liters/2.8 US gallons and can travel up to 131.1 km/h (81.5 mph). In a review by Motorcycle News, the Beta Alp 4.0 was described as a great all-round bike, good for touring and off-road use.

Technical specifications:

Make Model: Beta Alp 4.0

Year: 2005 – 06
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 349 cc / 21.3 cu in
Bore x Stroke: 79 x 71.2 mm
Compression Ratio: 9.5:1
Cooling System: Air cooled
Induction: Mikuni BST 33
Ignition: Electronic
Starting: Electric
Max Power: 20 kW / 27 hp
Max Torque: 28 Nm / 2.9 kgf-m 21 lb-ft
Clutch: Wet, multi disc
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular steel, double closed cradle
Front Suspension: Hydraulic fork, 48mm
Front Wheel Travel: 200 mm / 7.9 in
Rear Suspension: Single shock adjustable spring preload
Rear Wheel Travel: 220 mm / 8.7 in
Front Brakes: Single 260 mm disc, 2-piston caliper
Rear Brakes: Single 220 mm disc, 2-piston caliper
Wheels: Alloy, laced spokes
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Dimensions: Length: 2185 mm / 86.0 in Width: 860 mm / 33.9 in Height: 1230 mm / 48.4 in
Wheelbase: 1410 mm / 55.5 in
Ground Clearance: 300 mm / 1.8 in
Seat Height: 865 mm / 34 in
Dry Weight: 133 kg / 293 lbs
Fuel Capacity: 10.5 Litres / 2.8 US gal
Fuel Reserve: 3.5 Litres / 0.9 US gal
Fuel Consumption: 5.6 L/100 km / 17.7 km/l / 41.6 US mpg
Standing 1/4 Mile: 16.1 sec
Top Speed: 131.1 km/h / 81.5 mph
Review: Motorcycle News

The post Beta Alp4 (2005-06) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 400 Enduro (2012) https://motorcyclespecifications.com/beta-rr-400-enduro-2012-specs-2/ Thu, 30 Mar 2023 15:29:02 +0000 https://motorcyclespecifications.com/?p=37838 The Beta RR 350 Enduro was a motorcycle produced in 2012. It had a four-stroke, single-cylinder engine with a capacity of 349cc and a compression ratio of 12.4:1. The lubrication

The post Beta RR 400 Enduro (2012) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 350 Enduro was a motorcycle produced in 2012. It had a four-stroke, single-cylinder engine with a capacity of 349cc and a compression ratio of 12.4:1. The lubrication was forced by 2 oil pumps, and the cooling system was liquid-cooled and forced by a pump. The ignition was DC-CDI with variable ignition timing and a Kokusan spark plug. It had both electric and kick starting options, and the transmission was six-speed with a wet multi-disc clutch. The final drive was a chain with a primary drive of 28:76. The frame was made of molybdenum steel with a double cradle split above the exhaust port, and air filter access was from the side. The front suspension consisted of a 48mm Sachs USD fork with adjustable compression and rebound and TFX technology, while the rear suspension was a Sachs shock with adjustable rebound and hi/low speed compression. The motorcycle had a single 260mm floating disc with a 2-piston floating caliper for the front brakes and a single 240mm disc with a 1-piston floating caliper for the rear brakes. The front wheel was 1.60 x 21, and the rear wheel was 2.15 x 18. The dimensions of the motorcycle were length 2180mm, width 807mm, height 1270mm, wheelbase 1490mm, seat height 940mm, ground clearance 320mm, footrest height 413mm, and dry weight 114kg. The fuel capacity of the motorcycle was 8.4L, with a fuel reserve of 1.5L.

Technical specifications:

Make Model: Beta RR 350 Enduro

Year: 2012
Engine: Four stroke, single cylinder with countershaft
Capacity: 349 cc / 21.3 cu in
Bore x Stroke: 88 x 57.4 mm
Compression Ratio: 12.4:1
Lubrication: Forced, 2 oil pumps
Cooling System: Liquid cooled, forced by pump
Induction: Keihin FCR-MX 39mm
Ignition: DC-CDI with variable ignition timing, Kokusan
Spark Plug: NGK LKAR 8A-9
Starting: Electric and kick
Clutch: Wet multi-disc
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 12:31 / 2nd 15:28 / 3rd 19:28 / 4th 20:24 / 5th 27:27 / 6th 28:24
Primary Drive: 28:76
Frame: Molybdenum steel with double cradle split above exhaust port. Air filter access from the side
Front Suspension: 48 mm Sachs USD fork, adjustable compression and rebound, TFX technology, 11.4 in wheel travel.
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Sachs shock w/adjustable rebound and hi/low speed compression
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single 260 mm floating disc, 2 piston floating caliper
Rear Brakes: Single 240 mm disc, 1 piston floating caliper
Front Wheel: 1.60 x 21
Rear Wheel: 2.15 x 18
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Dimensions: Length: 2180 mm / 85.8 in Width: 807 mm / 31.8 in Height: 1270 mm / 50.0 in
Wheelbase: 1490 mm / 58.7 in
Seat Height: 940 mm / 37.0
Ground Clearance: 320 mm / 12.6 in
Footrest Height: 413 mm / 16.3 in
Dry Weight: 114 kg / 251 lb
Fuel Capacity: 8.4 L / 2.2 US gal
Fuel Reserve: 1.5 L / 0.4 US gal

The post Beta RR 400 Enduro (2012) appeared first on MotorcycleSpecifications.com.

]]> Beta Alp 200 4T (2005-06) https://motorcyclespecifications.com/beta-alp-200-4t-2005-06-specs/ Thu, 30 Mar 2023 06:26:01 +0000 https://motorcyclespecifications.com/?p=37326 The Beta Alp 200 4T is a motorcycle model from 2005-06. It has a four-stroke, single-cylinder engine with a capacity of 199 cc and a compression ratio of 9.4:1. The

The post Beta Alp 200 4T (2005-06) appeared first on MotorcycleSpecifications.com.

]]> The Beta Alp 200 4T is a motorcycle model from 2005-06. It has a four-stroke, single-cylinder engine with a capacity of 199 cc and a compression ratio of 9.4:1. The bike has air-cooling and forced lubrication systems and uses Mikuni BST 31 42AD induction, as well as electronic ignition. Both electric and kick starting are available, and the bike can reach a max power of 11.2 kW or 15 hp at 7750 rpm. Transmission includes five-speed and a chain drive. The front suspension consists of hydraulic forks with a 38mm width, providing for 170mm of front wheel travel, and the rear has a single shock adjustable spring preload with a rear wheel travel of 180mm. Front and rear brakes include single discs, and the bike has 2-piston and 1-piston calipers accordingly. The front and rear wheels are sized at 2.75-21 and 4.00-18 respectively, with the front and rear tyres at 90/90-21 and 120/80-18. The bike’s dimensions are 2150mm in length, 830mm in width, and 1170mm in height. The wheelbase is 1350mm and the seat height is 830mm with 280mm of ground clearance. The dry weight of the bike is 103kg, and it has a fuel capacity of 6.8L, with a fuel reserve of 1.5L.

Technical specifications:

Make Model: Beta Alp 200 4T

Year: 2005 – 06
Engine: Four stroke, single cylinder, SOHC, 2 valves per cylinder
Capacity: 199 cc / 12.1 cu in
Bore x Stroke: 66 x 58.2 mm
Compression Ratio: 9.4:1
Cooling System: Air cooled
Lubrication System: Forced, with pump
Induction: Mikuni BST 31 42AD
Ignition: Electronic
Starting: Electric & kick
Max Power: 11.2 kW / 15 hp @ 7750 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: Hydraulic forks, 38mm
Front Wheel Travel: 170 mm / 6.7 in
Rear Suspension: Single shock adjustable spring preload
Rear Wheel Travel: 180 mm / 7.1 in
Front Brakes: Single 220 mm disc, 2-piston caliper
Rear Brakes: Single 200 mm disc, 1-piston caliper
Front Wheel: 2.75 -21
Rear Wheel: 4.00 -18
Front Tyre: 90/90-21
Rear Tyre: 120/80-18
Dimensions: Length: 2150 mm / 84.6 in Width: 830 mm / 32.3 in Height: 1170 mm / 46.1 in
Wheelbase: 1350 mm / 53.1 in
Seat Height: 830 mm / 32.7 in
Ground Clearance: 280 mm / 11 in
Dry Weight: 103 kg / 227 lbs
Fuel Capacity: 6.8 L / 1.8 US gal
Fuel Reserve: 1.5 L / 0.40 US gal

The post Beta Alp 200 4T (2005-06) appeared first on MotorcycleSpecifications.com.

]]> Beta RE125 4T (2008) https://motorcyclespecifications.com/beta-re125-4t-2008-specs/ Thu, 30 Mar 2023 01:18:15 +0000 https://motorcyclespecifications.com/?p=37034 The Beta RE125 4T motorcycle was manufactured in 2008 and is equipped with an air-cooled, four-stroke single-cylinder engine with a capacity of 123cc. The engine is lubricated with forced oil

The post Beta RE125 4T (2008) appeared first on MotorcycleSpecifications.com.

]]> The Beta RE125 4T motorcycle was manufactured in 2008 and is equipped with an air-cooled, four-stroke single-cylinder engine with a capacity of 123cc. The engine is lubricated with forced oil and cooled with air. It features a Mikuni 5NH1 carburetor for induction and a Moryama 5HH ignition system with an R NGK CR7 HSA spark plug. The bike has both electric and kick starting options, a wet multiplate clutch, and a 5-speed transmission with a chain final drive. It has a steel double-cradle frame and hydraulic forks for its front suspension with a 41mm wheel travel. Its rear suspension is supported by a single shock and is adjustable for spring preload with 220mm of wheel travel. The bike has a stopping power from a single 260 mm disc in front and a single 220 mm disc on the rear wheel. It has a front wheel size of 1.6 x 21 inches and a rear wheel size of 1.85 x 18 inches, with a front tire size of 90/90-21 and a rear tire size of 120/80-18. The bike has a length of 2070 mm, a width of 820 mm, and a height of 1200 mm with a ground clearance of 292 mm and a seat height of 890 mm. The bike weighs 102 kg dry and 110 kg wet, including a fuel capacity of 6.7 liters with a 1-liter reserve. The bike has a top speed of 95.2 km/h (59 mph) and comes in three colors: red, white, and black.

Technical specifications:

Make Model: Beta RE 125 AT

Year: 2008
Engine: Air cooled, four stroke, single cylinder,
Capacity: 123 cc / 7.5 cu in
Bore x Stroke: 54 x 54 mm
Compression Ratio: 10.0:1
Lubrication: Forced, with pump
Engine Oil: SAE 15W/50
Cooling System: Air cooled
Induction: Mikuni 5NH1 carburetor
Ignition: Moryama 5HH
Spark Plub: R NGK CR7 HSA
Starting: Electric & kick
Clutch: Wet, multiplate
Transmission: 5 Speed
Final Drive: Chain
Frame: Steel, double cradle
Front Suspension: Hydraulic forks, 41mm
Front Wheel Travel: 245 mm / 9.6 in
Rear Suspension: Single shock adjustable spring preload
Rear Wheel Travel: 220 mm / 8.7 in
Front Brakes: Single 260 mm disc
Rear Brakes: Single 220 mm disc
Front Wheel: 1.6 x 21
Rear Wheel: 1.85 x 18
Front Tyre: 90/90-21
Rear Tyre: 120/80-18
Dimensions: Length: 2070 mm / 81.5 in Width: 820 mm / 32.3 in Height: 1200 mm / 47.2 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 292 mm / 11.5 in
Seat Height: 890 mm / 35.0 in
Dry Weight: 102 kg / 225 lbs
Wet Weight: 110 kg / 243 lbs
Fuel Capacity: 6.7 L / 1.8 US gal
Fuel Reserve: 1.0 L / 0.3 US gal
Standing 1/4 Mile: 12.7 sec
Top Speed: 95.2 km/h / 59 mph
Colours: Red, White, Black

The post Beta RE125 4T (2008) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 450 Enduro (2011-12) https://motorcyclespecifications.com/beta-rr-450-enduro-2011-12-specs-4/ Wed, 29 Mar 2023 21:23:56 +0000 https://motorcyclespecifications.com/?p=36813 The Beta RR 450 Enduro is a motorcycle produced between 2011 and 2012. It features a four-stroke, single-cylinder engine with a capacity of 448cc and a compression ratio of 11.95:1.

The post Beta RR 450 Enduro (2011-12) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 450 Enduro is a motorcycle produced between 2011 and 2012. It features a four-stroke, single-cylinder engine with a capacity of 448cc and a compression ratio of 11.95:1. The engine is lubricated by two oil pumps and has a forced lubrication system. The bike has an electric and a kick start and a six-speed transmission with a wet, multi-plate, hydraulically operated clutch. It has a molybdenum steel frame with a double cradle split above the exhaust port and a 26.5-degree rake. The front suspension is a Marzocchi hydraulic USD fork, 45mm, and the rear suspension is a Sachs mono shock with preload, compression, and rebound damping adjustable. The front brakes feature a single 260mm floating wave disc, 2 piston caliper, while the rear brakes have a single 240mm wave disc, 1 piston caliper. The bike has a front wheel size of 3.50 x 17 and a rear wheel size of 4.25 x 17, with a front tire size of 120/70-17 and a rear tire size of 150/60-17. It has a wheelbase of 1476mm and a seat height of 930mm. The dry weight of the bike is 113kg, and it has a fuel capacity of 8.5L. The bike comes in two colors, White/Red and Black.

Technical specifications:

Make Model: Beta RR 450 Motard

Year: 2011 – 12
Engine: Four stroke, single cylinder, OHC, 4 valves
Capacity: 448 cc / 27.3 cu in
Bore x Stroke: 95 x 63.4 mm
Compression Ratio: 11.95:1
Lubrication: Forced, 2 oil pumps
Oil Capacity: 0.8 L / 0.2 US gal
Induction: Keihin FCR-MX 39
Spark Plug: NGK LKAR 8A-9
Ignition: DC-CDI with variable ignition timing, Kokusan type
Battery: 12V, 5AH
Starting: Electric and kick
Clutch: Wet, multi-plate, hydraulically operated
Transmission: 6 Speed
Final Drive: Chain, O-ring, Regina
Primary Ratio: 31:73
Frame: Molybdenum steel with double cradle split above the exhaust port
Rake: 26.5 degrees
Trail: 108.5 mm / 4.27 in
Front Suspension: Marzocchi hydraulic USD fork, 45 mm
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Sachs mono shock, preload, compression and rebound damping adjustable
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single 260 mm floating wave disc, 2 piston caliper
Rear Brakes: Single 240 mm wave disc, 1 piston caliper
Front Rim: 3.50 x 17
Rear Rim: 4.25 x 17
Front Tyre: 120/70 -17
Rear Tyre: 150/60 -17
Wheelbase: 1476 mm / 58.1 in
Ground Clearance: 320 mm / 12.6 in
Footrest Height: 413 mm / 16.3 in
Seat Height: 930 mm / 36.6 in
Dry Weight: 113 kg / 249 lbs
Fuel Capacity: 8.5 L / 2.2 US gal
Colours: White/Red, Black

The post Beta RR 450 Enduro (2011-12) appeared first on MotorcycleSpecifications.com.

]]> Beta RR125 (2007-08) https://motorcyclespecifications.com/beta-rr125-2007-08-specs-2/ Wed, 29 Mar 2023 21:18:04 +0000 https://motorcyclespecifications.com/?p=36807 The Beta RR125 Enduro motorcycle produced between 2007 and 2008 features an air-cooled, four-stroke, single-cylinder engine with a capacity of 123cc and a compression ratio of 10.0:1. The engine is

The post Beta RR125 (2007-08) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR125 Enduro motorcycle produced between 2007 and 2008 features an air-cooled, four-stroke, single-cylinder engine with a capacity of 123cc and a compression ratio of 10.0:1. The engine is lubricated through a forced system with a pump and requires SAE 15W/50 oil. It has a Mikuni 5NH1 carburetor for induction and a Moryama 5HH ignition system. The motorcycle has both electric and kick starting options, a wet, multiplate clutch, and a five-speed transmission with a final drive chain. The frame is made of steel with a double cradle pattern, and it has hydraulic forks with a diameter of 41mm and a rear single shock adjustable spring preload. The motorcycle has single 260mm disc front brakes and single 220mm disc rear brakes. The dimensions are 2070 mm in length, 820 mm in width, and 1200 mm in height with a wheelbase of 1370 mm and ground clearance of 292 mm. The motorcycle has a dry weight of 102 kg and a wet weight of 110 kg with a fuel capacity of 6.7 L and fuel reserve of 1.0 L. It can travel at a top speed of 95.2 km/h and comes in red, white, or black.

Technical specifications:

Make Model: Beta RR 125 Enduro

Year: 2007 – 08
Engine: Air cooled, four stroke, single cylinder,
Capacity: 123 cc / 7.5 cu in
Bore x Stroke: 54 x 54 mm
Compression Ratio: 10.0:1
Lubrication: Forced, with pump
Engine Oil: SAE 15W/50
Cooling System: Air cooled
Induction: Mikuni 5NH1 carburetor
Ignition: Moryama 5HH
Spark Plub: R NGK CR7 HSA
Starting: Electric & kick
Clutch: Wet, multiplate
Transmission: 5 Speed
Final Drive: Chain
Frame: Steel, double cradle
Front Suspension: Hydraulic forks, 41mm
Front Wheel Travel: 245 mm / 9.6 in
Rear Suspension: Single shock adjustable spring preload
Rear Wheel Travel: 220 mm / 8.7 in
Front Brakes: Single 260 mm disc
Rear Brakes: Single 220 mm disc
Front Wheel: 1.6 x 21
Rear Wheel: 1.85 x 18
Front Tyre: 90/90-21
Rear Tyre: 120/80-18
Dimensions: Length: 2070 mm / 81.5 in Width: 820 mm / 32.3 in Height: 1200 mm / 47.2 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 292 mm / 11.5 in
Seat Height: 922 mm / 36.3 in
Dry Weight: 102 kg / 225 lbs
Wet Weight: 110 kg / 243 lbs
Fuel Capacity: 6.7 L / 1.8 US gal
Fuel Reserve: 1.0 L / 0.3 US gal
Standing 1/4 Mile: 12.7 sec
Top Speed: 95.2 km/h / 59 mph
Colours: Red, White, Black

The post Beta RR125 (2007-08) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 450 Enduro (2011-12) https://motorcyclespecifications.com/beta-rr-450-enduro-2011-12-specs-3/ Wed, 29 Mar 2023 20:17:00 +0000 https://motorcyclespecifications.com/?p=36753 The Beta RR 450 Enduro, manufactured between 2011 and 2012, is a four-stroke, single-cylinder motorcycle with a 510cc engine capacity, 11.0:1 compression ratio and liquid cooling system. It has a

The post Beta RR 450 Enduro (2011-12) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 450 Enduro, manufactured between 2011 and 2012, is a four-stroke, single-cylinder motorcycle with a 510cc engine capacity, 11.0:1 compression ratio and liquid cooling system. It has a Keihin FCR-MX 39 induction system, DC-CDI ignition with variable ignition timing, and both electric and kick starting mechanisms. The transmission is a six-speed system with wet, multi-disc clutch and chain final drive. The primary ratio is 33:76, with gear ratios ranging from 14:34 to 26:21. The frame is made of molybdenum steel with a double cradle split above the exhaust port, and the suspension includes a hydraulic USD fork and monoshock with progressive compound lever. The front brake is a single ~A255 mm floating disc with 2 piston floating caliper, while the rear brake is a single ~A240 mm disc with 1 piston floating caliper. The wheels are 1.6 x 21 and 2.15 x 18 in size, with front and rear tires measuring 90/90-21 and 140/80-18, respectively. The dimensions of the motorcycle are 2270mm in length, 813mm in width, and 1255mm in height. The wheelbase measures 1500mm, with a ground clearance of 320mm and seat height of 940mm. Dry weight is 115.5kg, fuel capacity is 8.5L, and the fuel reserve is 1L. According to a review by Motorcycle USA, the Beta RR 450 Enduro is a solid choice for off-road enthusiasts, with well-balanced handling, robust suspension, and smooth power delivery.

Technical specifications:

Make Model: Beta RR 525 Enduro

Year: 2011 – 12
Engine: Four stroke, single cylinder, 4 valve
Capacity: 510 cc / 31.1 cu in
Bore x Stroke: 95 x 72 mm
Compression Ratio: 11.0:1
Cooling System: Liquid cooled
Lubrication: Forced, 2 oil pumps
Engine Oil: 15W-40
Oil Capacity: 1.3 L / 0.34 US gal
Induction: Keihin FCR-MX 39
Ignition: DC-CDI without trembler with variable ignition timing, Kokusan type
Spark Plug: NGK DCPR 8 E
Starting: Electric and kick
Clutch: Wet, multi-disc
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 14:34 / 2nd 17:31 / 3rd 19:28 / 4th 22:26 / 5th 24:23 / 6th 26:21
Primary Ratio: 33:76
Frame: Molybdenum steel with double cradle split above the exhaust port
Rake: 26.5 degrees
Trail: 108.5 mm / 4.3 in
Front Suspension: Hydraulic USD fork, ~A45 mm
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Monoshock with progressive compound lever, 300mm wheel travel
Rear Wheel Travel: 300 mm / 11.8 in
Front Brakes: Single ~A255 mm floating disc, 2 piston floating caliper
Rear Brakes: Single ~A240 mm disc, 1 piston floating caliper
Front Wheel: 1.6 x 21
Rear Wheel: 2.15 x 18
Front Tyre: 90/90 – 21
Rear Tyre: 140/80 -18
Dimensions: Length: 2270 mm / 89.4 in Width: 813 mm / 32.0 in Height: 1255 mm / 49.4 in
Wheelbase: 1500 mm / 59.1 in
Ground Clearance: 320 mm / 12.6 in
Seat Height: 940 mm / 37 in
Footpeg Height: 405 mm / 15.9 in
Dry Weight: 115.5 kg / 255 lbs
Fuel Capacity: 8.5 L / 2.2 US gal
Fuel Reserve: 1 L / 0.3 US gal
Review: Motorcycle USA

The post Beta RR 450 Enduro (2011-12) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 450 Enduro (2009-10) https://motorcyclespecifications.com/beta-rr-450-enduro-2009-10-specs-3/ Wed, 29 Mar 2023 19:23:00 +0000 https://motorcyclespecifications.com/?p=36702 The Beta RR 450 Enduro is a Motard model that was produced from 2009-10. It has a four-stroke, single-cylinder, OHC engine with a capacity of 398cc and a compression ratio

The post Beta RR 450 Enduro (2009-10) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 450 Enduro is a Motard model that was produced from 2009-10. It has a four-stroke, single-cylinder, OHC engine with a capacity of 398cc and a compression ratio of 11.0:1. The Keihin FCR-MX 39 powers its induction while the ignition is DC-CDI without trembler with variable ignition timing. The motorcycle has both electric and kick starting with a maximum power of 8.4 kW at 3500 rpm. It has a wet, multi-plate, hydraulically operated clutch and a 6-speed transmission with a final chain drive. With a molybdenum steel double cradle, the split frame has a rake of 26.5 degrees and a trail of 108.5mm.

The Marzocchi hydraulic USD fork provides a front suspension travel of 290mm while the Sachs mono shock rear suspension has a compression and rebound damping adjustability with a rear wheel travel of 290mm. The front brake has a single 260mm disc with a two-piston caliper and the rear brake has a single 240mm disc with a single piston caliper. The motorcycle has a white/red colour combination and has 3.50 x 17 front and 4.25 x 17 rear rims with 120/70-17 and 150/60-17 front and rear tyres, respectively.

The Beta RR 450 Enduro has a length of 2200mm, width of 820mm, and height of 1220mm. The ground clearance of the motorcycle is 280mm and it has a seat height of 910mm. It has a dry weight of 116.5kg and a wet weight of 123kg. The GVWR of the motorcycle is 286kg with a fuel capacity of 8.5L / 2.2 US gal.

Technical specifications:

Make Model: Beta RR 400 Motard

Year: 2009 – 10
Engine: Four stroke, single cylinder, OHC, 4 valves
Capacity: 398 cc / 24.3 cu in
Bore x Stroke: 89 x 64 mm
Compression Ratio: 11.0:1
Induction: Keihin FCR-MX 39
Ignition: DC-CDI without trembler with variable ignition timing, Kokusan type
Battery: 12V, 5AH
Starting: Electric and kick
Max Power: 8.4 kW / 11.4 hp @ 3500 rpm
Clutch: Wet, multi-plate, hydraulically operated
Transmission: 6 Speed
Final Drive: Chain, X-ring
Gear Ratios: 1st 14:34 / 2nd 17:31 / 3rd 19:28 / 4th 22:26 / 5th 24:23 / 6th 26:21
Primary Ratio: 33:76
Secondary Ratio: 15:45
Frame: Molybdenum steel with double cradle split above the exhaust port
Rake: 26.5 degrees
Trail: 108.5 mm / 4.27 in
Front Suspension: Marzocchi hydraulic USD fork, 45 mm
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Sachs mono shock, preload, compression and rebound damping adjustable
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single 260 mm disc, 2 piston caliper
Rear Brakes: Single 240 mm disc, 1 piston caliper
Front Rim: 3.50 x 17
Rear Rim: 4.25 x 17
Front Tyre: 120/70 -17
Rear Tyre: 150/60 -17
Dimensions: Length: 2200 mm / 86.6 in Width: 820 mm / 32.3 in Height: 1220 mm / 48.0 in
Wheelbase: 1487 mm / 58.5 in
Ground Clearance: 280 mm / 11.0 in
Seat Height: 910 mm / 35.8 in
Dry Weight: 116.5 kg / 257 lbs
Wet Weight: 123 kg / 271 lbs
GVWR: 286 kg / 631 lbs
Fuel Capacity: 8.5 L / 2.2 US gal
Colours: White/Red

The post Beta RR 450 Enduro (2009-10) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 550 Enduro (2009-10) https://motorcyclespecifications.com/beta-rr-550-enduro-2009-10-specs/ Wed, 29 Mar 2023 16:15:02 +0000 https://motorcyclespecifications.com/?p=36528 The Beta RR 550 Enduro (2009-10) motorcycle is a four-stroke, single-cylinder bike with a capacity of 510 cc. It has a compression ratio of 11.0:1 and is cooled by a

The post Beta RR 550 Enduro (2009-10) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 550 Enduro (2009-10) motorcycle is a four-stroke, single-cylinder bike with a capacity of 510 cc. It has a compression ratio of 11.0:1 and is cooled by a liquid cooling system with forced lubrication using two oil pumps. It uses a Keihin FCR-MX 39 induction system and a DC-CDI ignition without trembler for variable ignition timing. The clutch is a wet, multi-disc system, and the bike has a six-speed transmission with a primary ratio of 33:76. Its frame is made of molybdenum steel with a double cradle that splits above the exhaust port. The front suspension is a hydraulic USD fork with 45mm diameter and 290mm wheel travel, while the rear suspension is a monoshock with progressive compound lever and 300mm wheel travel. The front and rear brakes are both disc brakes, with the front featuring a single 255mm floating disc and a 2 piston floating caliper, and the rear featuring a single 240mm disc and a 1 piston floating caliper. The bike weighs 115.5 kg (255 lbs) dry and has a fuel capacity of 8.5 L (2.2 US gal) with a 1 L (0.3 US gal) fuel reserve. Its dimensions are 2270mm (89.4 in) length, 813mm (32.0 in) width, and 1255mm (49.4 in) height with a wheelbase of 1500mm (59.1 in). The ground clearance is 320mm (12.6 in), the seat height is 940mm (37 in), and the footpeg height is 405mm (15.9 in).

Technical specifications:

Make Model: Beta RR 525 Enduro

Year: 2009 – 10
Engine: Four stroke, single cylinder, 4 valve
Capacity: 510 cc / 31.1 cu in
Bore x Stroke: 95 x 72 mm
Compression Ratio: 11.0:1
Cooling System: Liquid cooled
Lubrication: Forced, 2 oil pumps
Engine Oil: 15W-40
Oil Capacity: 1.3 L / 0.34 US gal
Induction: Keihin FCR-MX 39
Ignition: DC-CDI without trembler with variable ignition timing, Kokusan type
Spark Plug: NGK DCPR 8 E
Starting: Electric and kick
Clutch: Wet, multi-disc
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 14:34 / 2nd 17:31 / 3rd 19:28 / 4th 22:26 / 5th 24:23 / 6th 26:21
Primary Ratio: 33:76
Frame: Molybdenum steel with double cradle split above the exhaust port
Rake: 26.5 degrees
Trail: 108.5 mm / 4.3 in
Front Suspension: Hydraulic USD fork, ~A45 mm
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Monoshock with progressive compound lever, 300mm wheel travel
Rear Wheel Travel: 300 mm / 11.8 in
Front Brakes: Single ~A255 mm floating disc, 2 piston floating caliper
Rear Brakes: Single ~A240 mm disc, 1 piston floating caliper
Front Wheel: 1.6 x 21
Rear Wheel: 2.15 x 18
Front Tyre: 90/90 – 21
Rear Tyre: 140/80 -18
Dimensions: Length: 2270 mm / 89.4 in Width: 813 mm / 32.0 in Height: 1255 mm / 49.4 in
Wheelbase: 1500 mm / 59.1 in
Ground Clearance: 320 mm / 12.6 in
Seat Height: 940 mm / 37 in
Footpeg Height: 405 mm / 15.9 in
Dry Weight: 115.5 kg / 255 lbs
Fuel Capacity: 8.5 L / 2.2 US gal
Fuel Reserve: 1 L / 0.3 US gal

The post Beta RR 550 Enduro (2009-10) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 400 Enduro (2014) https://motorcyclespecifications.com/beta-rr-400-enduro-2014-specs-2/ Tue, 28 Mar 2023 20:54:00 +0000 https://motorcyclespecifications.com/?p=35448 The Beta RS 400 is a 2014 enduro motorcycle with a four stroke, single cylinder, 4 valve engine and a capacity of 398 cc. The compression ratio is 12.4:1 and

The post Beta RR 400 Enduro (2014) appeared first on MotorcycleSpecifications.com.

]]> The Beta RS 400 is a 2014 enduro motorcycle with a four stroke, single cylinder, 4 valve engine and a capacity of 398 cc. The compression ratio is 12.4:1 and the cooling system is liquid cooled. The motorcycle has a Keihin FCR-MX, 39mm induction system, and twin oil pumps with cartridge oil filter for lubrication. The ignition system is DC-CDI with variable ignition timing, and it can be started with an electric starter or kick. The clutch is a wet multi-disc type and the transmission has 6 speeds. The motorcycle is equipped with a molybdenum steel frame with a double cradle split above the exhaust port. The air filter is accessible from the side. The front suspension is a Sachs USD fork, 48 mm, with adjustable compression and rebound, TFX technology, and a front wheel travel of 290 mm. The rear suspension is a Sachs shock with adjustable rebound and hi/low speed compression, and a rear wheel travel of 290 mm. The front brakes are a single 260 mm floating disc, 2 piston caliper, while the rear brakes have a single 240 mm disc and 1 piston caliper. The front tyre is 90/90 -21 while the rear is 140/80 -18. The wheelbase is 1475 mm, the ground clearance is 320 mm, the seat height is 934.7 mm, and the dry weight is 109 kg. The fuel capacity is 7.9 L.

Technical specifications:

Make Model: Beta RS 400

Year: 2014
Engine: Four stroke, single cylinder, 4 valve
Capacity: 398 cc / 24.3 cu in
Bore x Stroke: 95 x 56.2 mm
Compression Ratio: 12.4:1
Cooling System: Liquid cooled
Induction: Keihin FCR-MX, 39mm
Lubrication: Twin oil pumps with cartridge oil filter. Separate oil for engine and clutch
Engine Oil Capacity: 0.8 L / 0.2 US gal
Ignition: DC-CDI with variable ignition timing, Kokusan.
Starting: Electric and Kick
Spark Plug: NGK LKAR 8A-9
Clutch: Wet multi-disc
Gearbox Oil Capacity: 0.8 L / 0.2 US gal
Transmission: 6 Speed
Final Drive: O-ring chain, DID
Primary Ratio: 31:73
Final Ratio: 15:48
Frame: Molybdenum steel with double cradle split above exhaust port. Air filter access from the side
Front Suspension: Sachs USD fork, 48 mm, adjustable compression and rebound, TFX technology,
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Sachs shock w/adjustable rebound and hi/low speed compression,
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single 260 mm floating disc, 2 piston caliper
Rear Brakes: Single 240mm disc, 1 piston caliper
Front Tyre: 90/90 -21
Rear Tyre: 140/80 -18
Wheelbase: 1475 mm / 58.1 in
Ground Clearance: 320 mm / 2.6 in
Seat Height: 934.7 mm / 36.8 in
Dry Weight: 109 kg / 245 lbs
Fuel Capacity: 7.9 L / 2.1 US gal

The post Beta RR 400 Enduro (2014) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 450 Enduro (2009-10) https://motorcyclespecifications.com/beta-rr-450-enduro-2009-10-specs-2/ Tue, 28 Mar 2023 19:06:09 +0000 https://motorcyclespecifications.com/?p=35350 The Beta RR 450 Motard is a four stroke, single cylinder motorcycle with a capacity of 448 cc. It has a compression ratio of 11.0:1 and uses Keihin FCR-MX 39

The post Beta RR 450 Enduro (2009-10) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 450 Motard is a four stroke, single cylinder motorcycle with a capacity of 448 cc. It has a compression ratio of 11.0:1 and uses Keihin FCR-MX 39 for induction. The bike has 6-speed transmission and a chain, X-ring final drive. Its frame is made of molybdenum steel with double cradle split above the exhaust port. The rake is 26.5 degrees, and the trail is 108.5 mm. Marzocchi hydraulic USD fork, 45 mm and Sachs mono-shock rear suspension provide smooth riding. It comes with a fuel capacity of 8.5 L and weighs 123 kg, making it quite light. The bike has a length of 2200 mm, a width of 820 mm, and a height of 1220 mm. With a maximum ground clearance of 280 mm and a seat height of 910 mm, it is suitable for off-road conditions. It has front and rear brakes with single discs and rim sizes of 3.50 x 17 and 4.25 x 17, respectively. The tyre dimensions are 120/70-17 for the front and 150/60-17 for the rear. Available colors are white/red and black.

Technical specifications:

Make Model: Beta RR 450 Motard

Year: 2009 – 10
Engine: Four stroke, single cylinder, OHC, 4 valves
Capacity: 448 cc / 27.3 cu in
Bore x Stroke: 89 x 72 mm
Compression Ratio: 11.0:1
Induction: Keihin FCR-MX 39
Ignition: DC-CDI without trembler with variable ignition timing, Kokusan type
Battery: 12V, 5AH
Starting: Electric and kick
Clutch: Wet, multi-plate, hydraulically operated
Transmission: 6 Speed
Final Drive: Chain, X-ring
Gear Ratios: 1st 14:34 / 2nd 17:31 / 3rd 19:28 / 4th 22:26 / 5th 24:23 / 6th 26:21
Primary Ratio: 33:76
Secondary Ratio: 15:45
Frame: Molybdenum steel with double cradle split above the exhaust port
Rake: 26.5 degrees
Trail: 108.5 mm / 4.27 in
Front Suspension: Marzocchi hydraulic USD fork, 45 mm
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Sachs mono shock, preload, compression and rebound damping adjustable
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single 260 mm disc, 2 piston caliper
Rear Brakes: Single 240 mm disc, 1 piston caliper
Front Rim: 3.50 x 17
Rear Rim: 4.25 x 17
Front Tyre: 120/70 -17
Rear Tyre: 150/60 -17
Dimensions: Length: 2200 mm / 86.6 in Width: 820 mm / 32.3 in Height: 1220 mm / 48.0 in
Wheelbase: 1487 mm / 58.5 in
Ground Clearance: 280 mm / 11.0 in
Seat Height: 910 mm / 35.8 in
Dry Weight: 117 kg / 257 lbs
Wet Weight: 123 kg / 271 lbs
GVWR: 286 kg / 631 lbs
Fuel Capacity: 8.5 L / 2.2 US gal
Colours: White/Red, Black

The post Beta RR 450 Enduro (2009-10) appeared first on MotorcycleSpecifications.com.

]]> Beta Jonathan Cruiser 350 (2002) https://motorcyclespecifications.com/beta-jonathan-cruiser-350-2002-specs/ Tue, 28 Mar 2023 17:10:10 +0000 https://motorcyclespecifications.com/?p=35241 The Beta Jonathan Cruiser 350 is a motorcycle model from 2002 with a four stroke, single cylinder engine that has a capacity of 349cc. Its compression ratio is 9.5:1 and

The post Beta Jonathan Cruiser 350 (2002) appeared first on MotorcycleSpecifications.com.

]]> The Beta Jonathan Cruiser 350 is a motorcycle model from 2002 with a four stroke, single cylinder engine that has a capacity of 349cc. Its compression ratio is 9.5:1 and it uses an air cooling system. The Mikuni BST 33 is responsible for its induction, while the ignition is electronic and it has an electric starting system. The motorcycle can produce a maximum power of 20kW/27 hp at 9000 rpm. For its transmission, it uses a 6-speed gearbox, operated by a wet multi-disc clutch, and a chain for the final drive. The motorcycle is built with a tubular steel frame and double closed cradle. Its suspension system is comprised of a hydraulic fork with 48mm front wheel travel and a single shock with adjustable spring preload for the rear wheel, which has a travel of 100mm/3.9in. The front and rear brakes use single 2-piston calipers with 300mm and 220mm discs, respectively. The alloy laced spoke wheels have a front wheel size of 2.50 x 16 and a rear wheel size of 3.50 x 15, with tire sizes of 120/80-16 for the front and 140/90-15 for the rear. The motorcycle has a length of 2210mm/87.0in, a height of 1090mm/42.9in, and a wheelbase of 1470mm/57.9in, with a ground clearance of 240mm/9.4in and a dry weight of 138kg/304lbs. The fuel tank capacity is 22 liters/5.8 US gal, and it is available in black.

Technical specifications:

Make Model: Beta Jonathan Cruiser 350

Year: 2002
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 349 cc / 21.3 cu in
Bore x Stroke: 79 x 71.2 mm
Compression Ratio: 9.5:1
Cooling System: Air cooled
Induction: Mikuni BST 33
Ignition: Electronic
Starting: Electric
Max Power: 20 kW / 27 hp @ 9000 rpm
Clutch: Wet, multi disc
Transmission: 6 Speed
Final Drive: Chain
Frame: Tubular steel, double closed cradle
Front Suspension: Hydraulic fork, 48mm
Front Wheel Travel: 120 mm / 4.7 in
Rear Suspension: Single shock adjustable spring preload
Rear Wheel Travel: 100 mm / 3.9in
Front Brakes: Single 300 mm disc, 2-piston caliper
Rear Brakes: Single 220 mm disc, 2-piston caliper
Wheels: Alloy, laced spokes
Front Wheel: 2.50 x 16
Rear Wheel: 3.50 x 15
Front Tyre: 120/80-16
Rear Tyre: 140/90 -15
Dimensions: Length: 2210 mm / 87.0 in Height: 1090 mm / 42.9 in
Wheelbase: 1470 mm / 57.9 in
Ground Clearance: 240 mm/ 9.4 in
Seat Height: 740 mm / 29.1 in
Dry Weight: 138 kg / 304 lbs
Fuel Capacity: 22 Litres / 5.8 US gal
Colours: Black

The post Beta Jonathan Cruiser 350 (2002) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 400 Enduro (2011-13) https://motorcyclespecifications.com/beta-rr-400-enduro-2011-13-specs/ Tue, 28 Mar 2023 11:42:07 +0000 https://motorcyclespecifications.com/?p=34932 The Beta RR 400 Enduro motorcycle was produced from 2011 to 2013 and had a four-stroke, single-cylinder, DOHC, 4 valve engine with a capacity of 398cc. It had a compression

The post Beta RR 400 Enduro (2011-13) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 400 Enduro motorcycle was produced from 2011 to 2013 and had a four-stroke, single-cylinder, DOHC, 4 valve engine with a capacity of 398cc. It had a compression ratio of 12.4:1 and was liquid cooled. The motorcycle featured a Keihin FCR-MX 39mm induction system, DC-CDI with variable ignition timing, and a Kokusan ignition. It started with an electric start with a backup kick starter and had a wet multi-disc clutch with a 6 speed transmission and chain final drive. The front suspension consisted of a Marzocchi USD fork, 50mm ~A, with adjustable compression and rebound, TFX technology. The rear suspension was a Sachs shock with adjustable rebound and hi/low speed compression. The motorcycle had a single 260mm floating disc with 2 piston floating caliper front brake and a single 240mm disc with a one-piston floating caliper rear brake. The wheels were alloy with laced spokes, and the front tire was 90/90-21, and the rear tire was 140/80-18. The dimensions of the motorcycle were 2180mm in length, 807mm in width, and 1270mm in height, with a wheelbase of 1490mm and a seat height of 940mm. The dry weight of the motorcycle was 114kg, and it had a fuel capacity of 8.5L with a fuel reserve of 1.5L. According to a review by Motorcycle USA’s Jean Turner, the Beta RR 400 Enduro was a capable off-road motorcycle with a strong engine, great suspension system, and good handling.

Technical specifications:

Make Model: Beta RR 400 Enduro

Year: 2011 -13
Engine: Four stroke, single cylinder, DOHC, 4 valve
Capacity: 398 cc / 24.3 cu in
Bore x Stroke: 95 x 56.2 mm
Compression Ratio: 12.4:1
Lubrication: Liquid cooled
Engine Oil: 15W-50
Engine Capacity: 0.8 L / 0.2 US gal
Induction: Keihin FCR-MX 39 mm
Ignition: DC-CDI with variable ignition timing, Kokusan.
Starting: Electric start with back up kick starter.
Spark Plug: NGK LKAR 8A-9
Clutch: Wet multi-disc
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 12:31 / 2nd 15:28 / 3rd 19:28 / 4th 20:24 / 5th 27:27 / 6th 28:24
Primary Drive: 33/76
Frame: Molybdenum steel with double cradle split above the exhaust port
Front Suspension: Marzocchi USD fork, 50 mm ~A, adjustable compression and rebound, TFX technology
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Sachs shock w/adjustable rebound and hi/low speed compression
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single 260 mm floating disc, 2 piston floating caliper
Rear Brakes: Single 240 mm disc, 1 piston floating caliper
Wheels: Alloy, laced spokes
Front Wheel: 1.60 x 21
Rear Wheel: 2.15 x 18
Front Tyre: 90/90-21
Rear Tyre: 140/80-18
Dimensions: Length: 2180 mm / 85.8 in Width: 807 mm / 31.8 in Height: 1270 mm / 50.0 in
Wheelbase: 1490 mm / 58.7 in
Seat Height: 940 mm / 37 in
Ground Clearance: 320 mm / 12.6 in
Footrest Height: 413 mm / 16.3 in
Dry Weight: 114 kg / 251 lb
Fuel Capacity: 8.5 L / 2.2 gal
Fuel Reserve: 1.5 L / 0.5 US gal
Review: Jean Turner, Motorcycle USA

The post Beta RR 400 Enduro (2011-13) appeared first on MotorcycleSpecifications.com.

]]> Beta RR125 (2009-10) https://motorcyclespecifications.com/beta-rr125-2009-10-specs/ Tue, 28 Mar 2023 08:34:12 +0000 https://motorcyclespecifications.com/?p=34757 The Beta RR125 Motard motorcycle was produced from 2009-10. It comes equipped with a four-stroke, single cylinder, SOHC engine, with a capacity of 123cc or 7.5 cu in. The engine

The post Beta RR125 (2009-10) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR125 Motard motorcycle was produced from 2009-10. It comes equipped with a four-stroke, single cylinder, SOHC engine, with a capacity of 123cc or 7.5 cu in. The engine is air-cooled and has a forced lubrication system with pump, with an oil capacity of 1.2L or 0.3 US gal. It features a Mikuni 5NH1 carburetor for induction and a Moriyama F5HH ignition system. The bike has both electric and kick starting options and a wet, multiplate clutch, and a five-speed transmission. The final drive is chain, with a primary drive of 20:68 and a secondary drive of 14:50. The bike has a steel double-cradle frame and hydraulic front forks with 41mm wheel travel. The rear suspension is a single shock system with adjustable spring preload and 220mm rear wheel travel. The front and rear wheels are single disc brakes with 260mm and 220mm discs respectively. The wheels are 1.6x17in and 1.85x17in for the front and rear respectively. The dimensions are: Length: 2065mm, Width: 820mm, Height: 1230mm, Wheelbase: 1370mm, Ground Clearance: 310mm, Footrest Height: 378mm, and Seat Height: 920mm. The dry weight of the bike is 102kg, and the wet weight is 110kg. The bike has a fuel capacity of 5.7L or 1.5 US gal and a fuel reserve of 1.0L or 0.3 US gal. The bike has a standing 1/4 mile time of 12.7 seconds and can reach a top speed of 95.2km/h or 59mph. The bike is available in blue or black.

Technical specifications:

Make Model: Beta RR 125 Motard

Year: 2009 – 10
Engine: Four stroke, single cylinder, SOHC
Capacity: 123 cc / 7.5 cu in
Bore x Stroke: 54 x 54 mm
Compression Ratio: 10.0:1
Cooling System: Air cooled
Lubrication: Forced, with pump
Engine Oil: SAE 15W/50
Oil Capacity: 1.2 L / 0.3 US gal
Induction: Mikuni 5NH1 carburetor
Ignition: Moriyama F5HH
Spark Plug: NGK R CR7 HSA
Starting: Electric & kick
Clutch: Wet, multiplate
Transmission: 5 Speed
Final Drive: Chain
Primary Drive: 20:68
Secondary Drive: 14:50
Frame: Steel, double cradle
Front Suspension: Hydraulic forks, 41mm
Front Wheel Travel: 245 mm / 9.6 in
Rear Suspension: Single shock, adjustable spring preload
Rear Wheel Travel: 220 mm / 8.7 in
Front Brakes: Single 260 mm disc
Rear Brakes: Single 220 mm disc
Front Wheel: 1.6 x 17
Rear Wheel: 1.85 x 17
Front Tyre: 110/80 – 17
Rear Tyre: 130/80 – 17
Dimensions: Length: 2065 mm / 81.3 in Width: 820 mm / 32.3 in Height: 1230 mm / 48.4 in
Wheelbase: 1370 mm / 53.9 in
Ground Clearance: 310 mm / 12.2 in
Footrest Height: 378 mm / 14.9 in
Seat Height: 920 mm / 36.3 in
Dry Weight: 102 kg / 225 lbs
Wet Weight: 110 kg / 243 lbs
Fuel Capacity: 5.7 L / 1.5 US gal
Fuel Reserve: 1.0 L / 0.3 US gal
Standing 1/4 Mile: 12.7 sec
Top Speed: 95.2 km/h / 59 mph
Colours: Blue, Black

The post Beta RR125 (2009-10) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 400 Enduro (2014) https://motorcyclespecifications.com/beta-rr-400-enduro-2014-specs/ Mon, 27 Mar 2023 22:16:02 +0000 https://motorcyclespecifications.com/?p=34174 The Beta RR 400 Enduro motorcycle is a four stroke, single cylinder bike with a 449cc capacity engine. It has a compression ratio of 11.95:1, is liquid cooled, and uses

The post Beta RR 400 Enduro (2014) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 400 Enduro motorcycle is a four stroke, single cylinder bike with a 449cc capacity engine. It has a compression ratio of 11.95:1, is liquid cooled, and uses a Keihin FCR-MX 39mm induction system. The engine uses twin oil pumps with a cartridge oil filter and separate oil for the engine and clutch. The DC-CDI ignition system has variable ignition timing and is Kokusan. It has both electric and kick starting and uses an NGK LKAR 8A-9 spark plug. The clutch is wet and multi-plate, and the transmission is 6-speed with a final drive of an O-ring chain from DID. The frame is made of molybdenum steel with a double cradle split above the exhaust port and has side air filter access. The front suspension is a Sachs USD fork with 48mm adjustable compression and rebound and TFX technology. The rear suspension is a Sachs shock with adjustable rebound and high/low speed compression, both with a 290mm/11.4 in travel. The front and rear brakes are single 260mm and 240mm discs, respectively with 2-piston and 1-piston calipers. The tire sizes are 90/90-21 in the front and 140/80-18 in the rear. The motorcycle has a wheelbase of 1475mm/58.1 in, a ground clearance of 320mm/12.6 in, a seat height of 934.7mm/36.8 in, a dry weight of 108kg/240 lbs, and a fuel capacity of 7.9L/2.1 gulp.

Technical specifications:

Make Model: Beta RS 450

Year: 2014
Engine: Four stroke, single cylinder, 4 valve
Capacity: 449 cc / 27.4 cu in
Bore x Stroke: 95 x 63.4 mm
Compression Ratio: 11.95:1
Cooling System: Liquid cooled
Induction: Keihin FCR-MX 39 mm
Lubrication: Twin oil pumps with cartridge oil filter. Separate oil for engine and clutch
Engine Oil Capacity: 0.8 L / 0.2 US gal
Ignition: DC-CDI with variable ignition timing, Kokusan.
Starting: Electric and kick
Spark Plug: NGK LKAR 8A-9
Clutch: Wet, multi-plate
Gearbox Oil Capacity: 0.8 L / 0.2 US gal
Transmission: 6 Speed
Final Drive: O-ring chain, DID
Frame: Molybdenum steel with double cradle split above exhaust port. Air filter access from the side
Front Suspension: Sachs USD fork, 48 mm, adjustable compression and rebound, TFX technology
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Sachs shock w/adjustable rebound and hi/low speed compression,
Rear Wheel Travel: 290 mm / 11.4 in
Front Brakes: Single 260 mm disc, 2 piston caliper
Rear Brakes: Single 240 mm disc, 1 piston caliper
Front Tyre: 90/90 – 21
Rear Tyre: 140/80 – 18
Wheelbase: 1475 mm / 58.1 in
Ground Clearance: 320 mm / 12.6 in
Seat Height: 934.7 mm / 36.8 in
Dry Weight: 108 kg / 240 lbs
Fuel Capacity: 7.9 L / 2.1 gal

The post Beta RR 400 Enduro (2014) appeared first on MotorcycleSpecifications.com.

]]> Beta RR 550 Enduro (2005-06) https://motorcyclespecifications.com/beta-rr-550-enduro-2005-06-specs/ Mon, 27 Mar 2023 17:11:07 +0000 https://motorcyclespecifications.com/?p=33883 The Beta RR 550 Enduro (2005-06) is a four-stroke, single-cylinder motorcycle with a 510cc capacity and a compression ratio of 11.0:1. It has a liquid cooling system and forced lubrication

The post Beta RR 550 Enduro (2005-06) appeared first on MotorcycleSpecifications.com.

]]> The Beta RR 550 Enduro (2005-06) is a four-stroke, single-cylinder motorcycle with a 510cc capacity and a compression ratio of 11.0:1. It has a liquid cooling system and forced lubrication with 2 oil pumps. The bike features a Keihin FCR-MX 39 induction system, DC-CDI ignition without trembler, and electric and kick starting. The clutch is wet multi-disc and the transmission has 6 speeds with a chain final drive. The frame is made of molybdenum steel with double cradle split above the exhaust port, with a rake of 26.5 degrees and a trail of 108.5mm/4.3in. The front suspension is hydraulic USD fork with ~A45mm, and the rear suspension is monoshock with progressive compound lever and 300mm wheel travel. The front and rear brakes are single ~A255mm and ~A240mm, respectively. The front wheel is 1.6 x 21, and the rear wheel is 2.15 x 18. It has a fuel capacity of 8.5L/2.2 US gal and a fuel reserve of 1L/0.3 US gal, with a dry weight of 118kg/260lbs. The bike’s dimensions are: length 2270mm/89.4in, width 813mm/32.0in, and height 1255mm/49.4in, with a wheelbase of 1490mm/58.7in, ground clearance of 320mm/12.6in, seat height of 940mm/37in, and footpeg height of 405mm/15.9in.

Technical specifications:

Make Model: Beta RR 525 Enduro

Year: 2005 – 06
Engine: Four stroke, single cylinder, 4 valve
Capacity: 510
Bore x Stroke: 95 x 72 mm
Compression Ratio: 11.0:1
Cooling System: Liquid cooled
Lubrication: Forced, 2 oil pumps
Engine Oil: 15W-40
Oil Capacity: 1.3 L / 0.34 US gal
Induction: Keihin FCR-MX 39
Ignition: DC-CDI without trembler with variable ignition timing, Kokusan type
Spark Plug: NGK DCPR 8 E
Starting: Electric and kick
Clutch: Wet, multi-disc
Transmission: 6 Speed
Final Drive: Chain
Gear Ratios: 1st 14:34 / 2nd 17:31 / 3rd 19:28 / 4th 22:26 / 5th 24:23 / 6th 26:21
Primary Ratio: 33:76
Frame: Molybdenum steel with double cradle split above the exhaust port
Rake: 26.5 degrees
Trail: 108.5 mm / 4.3 in
Front Suspension: Hydraulic USD fork, ~A45 mm
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Monoshock with progressive compound lever, 300mm wheel travel
Rear Wheel Travel: 300 mm / 11.8 in
Front Brakes: Single ~A255 mm floating disc, 2 piston floating caliper
Rear Brakes: Single ~A240 mm disc, 1 piston floating caliper
Front Wheel: 1.6 x 21
Rear Wheel: 2.15 x 18
Front Tyre: 90/90 – 21
Rear Tyre: 140/80 -18
Dimensions: Length: 2270 mm / 89.4 in Width: 813 mm / 32.0 in Height: 1255 mm / 49.4 in
Wheelbase: 1490 mm / 58.7 in
Ground Clearance: 320 mm / 12.6 in
Seat Height: 940 mm / 37 in
Footpeg Height: 405 mm / 15.9 in
Dry Weight: 118 kg / 260 lbs
Fuel Capacity: 8.5 L / 2.2 US gal
Fuel Reserve: 1 L / 0.3 US gal

The post Beta RR 550 Enduro (2005-06) appeared first on MotorcycleSpecifications.com.

]]> Beta Alp 4 (2005-06) https://motorcyclespecifications.com/beta-alp-4-2005-06-specs/ Mon, 27 Mar 2023 01:23:59 +0000 https://motorcyclespecifications.com/?p=32988 The Beta Alp 4 Motard motorcycle was manufactured between 2005 and 2006. It has a four-stroke, single-cylinder engine with a capacity of 349cc and a compression ratio of 9.5:1. The

The post Beta Alp 4 (2005-06) appeared first on MotorcycleSpecifications.com.

]]> The Beta Alp 4 Motard motorcycle was manufactured between 2005 and 2006. It has a four-stroke, single-cylinder engine with a capacity of 349cc and a compression ratio of 9.5:1. The Mikuni BEST 33 induction system and electronic ignition enable electric starting, and it has a maximum power of 19.2 kW at 6600 rpm and a torque of 28.4 Nm at 6050 rpm. It comes with a six-speed transmission and chain final drive.

The motorcycle has a steel, double-cradle frame and 28mm hydraulic forks at the front with 200mm wheel travel. The rear suspension is a single shock with adjustable spring preload and 220mm wheel travel. The front and rear brakes come with a single 310mm disc and 220mm disc, respectively.

It has a wheelbase of 1410mm, seat height of 870mm, and a dry weight of 133kg. The fuel tank capacity is 10.5 liters, and it has an average fuel consumption of 3.5 L/100km. It can reach a top speed of 133.2 km/h and achieve a standing quarter-mile in 16.1 seconds at 123.5 km/h. The ground clearance of this motorcycle is 305mm, and it has a length of 2159mm and a width of 860mm.

Technical specifications:

Make Model: Beta M4 Motard

Year: 2005 – 06
Engine: Four stroke, single cylinder, SOHC, 4 valves
Capacity: 349 cc / 21.3 cu in
Bore x Stroke: 79 x 71.2 mm
Compression Ratio: 9.5:1
Cooling System: Air
Induction: Mikuni BEST 33
Ignition: Electronic
Starting: Electric
Max Power: 19.2 kW / 25.8 hp @ 6600 rpm
Max Torque: 28.4 Nm / 2.9 kgf-m / 20.9 lb-ft @ 6050 rpm
Transmission: 6 Speed
Final Drive: Chain
Frame: Steel, double cradle
Front Suspension: 28 mm hydraulic forks
Front Wheel Travel: 200 / 7.9 in
Rear Suspension: Single shock adjustable spring preload, 220mm wheel travel
Rear Wheel Travel: 220 mm / 8.7 in
Front Brakes: Single 310 mm disc
Rear Brakes: Single 220 mm disc
Front Tyre: 120/70 -17
Rear Tyre: 150/60 -17
Dimensions: Length: 2159 mm / 85.0 in Width: 860 mm / 33.9 in
Wheelbase: 1410 mm / 55.5 in
Ground Clearance: 305 mm / 12.0 in
Seat Height: 870 mm / 34.3 in
Dry Weight: 133 kg / 293 lbs
Fuel Capacity: 10.5 Litres / 2.8 US gal
Consumption Average: 3.5 L/100 km / 28.7 km/l / 67.5 US mpg
Standing 1/4 Mile: 16.1 sec / 123.5 km/h / 76.7 mph
Top Speed: 133.2 km/h / 82.8 mph

The post Beta Alp 4 (2005-06) appeared first on MotorcycleSpecifications.com.

]]>