Beta RR 550 Enduro (2007-08)

Posted on March 26, 2023April 8, 2023 by admin

The Beta RR 525 Enduro motorcycle was produced from 2007-08 and had a four-stroke, single-cylinder engine with a capacity of 510 cc. The compression ratio was 11.0:1 and it used forced lubrication with 2 oil pumps. The ignition was DC-CDI without a trembler, and it had electric and kick start. The transmission was 6-speed and had a wet, multi-disc clutch with a chain final drive. The frame was made of molybdenum steel with a double cradle split above the exhaust port. The front suspension was a hydraulic USD fork with 290 mm of wheel travel, and the rear suspension was a monoshock with a progressive compound lever and 300mm of wheel travel. The front and rear brakes were a single floating disc with a piston floating caliper. The motorcycle had 1.6 x 21 front and 2.15 x 18 rear wheels and used a 90/90-21 front tire and a 140/80-18 rear tire. It was 2270 mm long, 813 mm wide, and 1255 mm tall with a wheelbase of 1500 mm and a ground clearance of 320 mm. The seat height was 940 mm and the dry weight was 115.5 kg with a fuel capacity of 8.5 L and a fuel reserve of 1 L.

Technical specifications:

Make Model: Beta RR 525 Enduro

Year: 2007 – 08

Engine: Four stroke, single cylinder, 4 valve
Capacity: 510 cc / 31.1 cu in
Bore x Stroke: 95 x 72 mm
Compression Ratio: 11.0:1
Cooling System: Liquid cooled
Lubrication: Forced, 2 oil pumps
Engine Oil: 15W-40
Oil Capacity: 1.3 L / 0.34 US gal
Induction: Keihin FCR-MX 39
Ignition: DC-CDI without trembler with variable ignition timing, Kokusan type
Spark Plug: NGK DCPR 8 E
Starting: Electric and kick
Clutch: Wet, multi-disc
Transmission: 6 Speed
Final Drive: Chain

Gear Ratios: 1st 14:34 / 2nd 17:31 / 3rd 19:28 / 4th 22:26 / 5th 24:23 / 6th 26:21
Primary Ratio: 33:76
Frame: Molybdenum steel with double cradle split above the exhaust port
Rake: 26.5 degrees
Trail: 108.5 mm / 4.3 in
Front Suspension: Hydraulic USD fork, ~A45 mm
Front Wheel Travel: 290 mm / 11.4 in
Rear Suspension: Monoshock with progressive compound lever, 300mm wheel travel
Rear Wheel Travel: 300 mm / 11.8 in
Front Brakes: Single ~A255 mm floating disc, 2 piston floating caliper
Rear Brakes: Single ~A240 mm disc, 1 piston floating caliper
Front Wheel: 1.6 x 21
Rear Wheel: 2.15 x 18
Front Tyre: 90/90 – 21
Rear Tyre: 140/80 -18
Dimensions: Length: 2270 mm / 89.4 in Width: 813 mm / 32.0 in Height: 1255 mm / 49.4 in
Wheelbase: 1500 mm / 59.1 in
Ground Clearance: 320 mm / 12.6 in
Seat Height: 940 mm / 37 in
Footpeg Height: 405 mm / 15.9 in

Dry Weight: 115.5 kg / 255 lbs
Fuel Capacity: 8.5 L / 2.2 US gal
Fuel Reserve: 1 L / 0.3 US gal