Aprilia Pegaso 650ie (2003-06)

The Aprilia Pegaso 650ie motorcycle was produced from 2003 to 2006 and features a four-stroke, single-cylinder, DOHC, 652 cc engine with a maximum power of 36.4 kW / 50 hp at 7000 rpm and maximum torque of 59 Nm / 6.02 kgf-m / 43.5 lb-ft at 6500 rpm. The engine has a compression ratio of 9.1:1 and is liquid-cooled with two Mikuni BST33 carburetors. The motorcycle has an electric starter and a 5-speed transmission with a final drive chain. The front suspension has upside-down forks that are preload adjustable with a Marzocci and offers 175mm / 6.9 in of wheel travel. The rear suspension has a varying section high-strength steel swing-arm with an Aprilia Progressive System (APS) rising rate linkage. The motorcycle also features single ~A300 mm disc brakes in the front and single ~A220 mm disc brakes in the rear. The front wheel tyre size is 100/90-19, and the rear is 130/80-17. The dimensions of the motorcycle are a length of 2159 mm / 85.0 in, width of 810 mm / 31.9 in, a wheelbase of 1478mm / 58.2 in, and a seat height of 810 mm / 31.9 in.


Technical specifications:

Make Model: Aprilia Pegaso 650ie

Year: 2003 – 06


Engine: Four stroke, single-cylinder, DOHC, 5 valves
Capacity: 652 cc / 39.8 cu in
Bore x Stroke: 100 x 83 mm
Compression Ratio: 9.1:1
Cooling System: Liquid cooled
Induction: 2 x ~A32 mm Mikuni BST33
Starting: Electric
Max Power: 36.4 kW / 50 hp @ 7000 rpm
Max Torque: 59 Nm / 6.02 kgf-m / 43.5 lb-ft @ 6500 rpm
Transmission: 5 Speed
Final Drive: Chain
Front Suspension: ~A45 mm Upside down forks preload adjustable, Marzocci
Front Wheel Travel: 175 mm / 6.9 in
Rear Suspension: Varying section high strength steel swing-arm, Aprilia Progressive System (APS) rising rate linkage
Front Brakes: Single ~A300 mm disc, 2 piston caliper

Rear Brakes: Single ~A220 mm disc, 1 piston caliper
Front Tyre: 100/90-19
Rear Tyre: 130/80-17
Dimensions: Length: 2159 mm / 85.0 in Width: 810 mm / 31.9 in
Wheelbase: 1478 mm / 58.2 in
Seat Height: 810 mm / 31.9 in

Related models: